Current through Register 2024 Notice Reg. No. 50, December 13, 2024
(a) A lot drain inlet shall be provided with a trap except where: (1) a recreational vehicle manufactured prior to January 1, 1999, is bearing an insignia of approval issued by the department, or(2) a recreational vehicle manufactured on or after January 1,1999, bearing a label or insignia indicating that the recreational vehicles manufacturer's construction and designs comply with either the American National Standards Institute (ANSI) Standard on recreational vehicles, A119.2, or the ANSI Standard on recreational vehicle park trailers, A119.5, is connected to the lot drain inlet.(b) The park operator shall obtain the necessary permits from the enforcement agency and shall install the required trap and vent on the lot drain inlet for all lots designed for accommodating vehicles not bearing a department insignia of approval or evidence of compliance with applicable ANSI standards.(c) When a unit is installed, or proposed to be installed and its plumbing fixtures are not protected by approved traps and vents, a lot drain inlet shall be provided with an approved trap.Cal. Code Regs. Tit. 25, § 2258
1. New section filed 7-6-2004; operative 7-6-2004 pursuant to Government Code section 11343.4 (Register 2004, No. 28). Note: Authority cited: Section 18865, Health and Safety Code. Reference: Section 18873.1, Health and Safety Code.
1. New section filed 7-6-2004; operative 7-6-2004 pursuant to Government Code section 11343.4 (Register 2004, No. 28).