Section 66387.2 - References(a) When used in Chapter 25, the following publications are incorporated by reference: (1) ILAC-P5:10:2013, "International Laboratory Accreditation Cooperation (ILAC) Multilateral Recognition Arrangement", dated 2013, available from the ILAC Secretariat, PO Box 7507, Silverwater, NSW 2128, Australia.(2) ISO/IEC Guide 65:1996, "General requirement for bodies operating product certification systems," dated 1996, available from the International Organization for Standardization (ISO), ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland(3) ISO/IEC 17011:2005, "General requirements for accreditation bodies accrediting conformity assessment bodies", dated 2005, available from International Organization for Standardization (ISO), ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland(4) ISO/IEC 17025:2005, "General requirements for the competence of testing and calibration laboratories," dated 2005, available from International Organization for Standardization (ISO), ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland(5) ISO/IEC 17065:2012, "Conformity assessment -- Requirements for bodies certifying products, processes and services," dated 2012, available from International Organization for Standardization (ISO), ISO Central Secretariat, 1, ch. de la Voie-Creuse, CP 56, CH-1211 Geneva 20, Switzerland(6) NELAC Institute Standard, Environmental Laboratory Sector, Volume 1, "Management and Technical Requirements for Laboratories Performing Environmental Analysis," dated 2009, available from The NELAC Institute, P. O. Box 2439, Weatherford, TX 76086;(7) SAE J 866:JUL2012, "Friction Coefficient Identification and Environmental Marking System for Brake Linings," dated July 2012, available from the Society of Automotive Engineers (SAE) Customer Service, 400 Commonwealth Drive, Warrendale, PA 15096-0001;(8) SAE J 2975:DEC2013, "Measurement of Copper and Other Elements in Brake Friction Materials," dated December 2013, available from the Society of Automotive Engineers (SAE) Customer Service, 400 Commonwealth Drive, Warrendale, PA 15096-0001.Cal. Code Regs. Tit. 22, § 66387.2
1. New section filed 9-30-2016; operative 1-1-2017 (Register 2016, No. 40). Note: Authority cited: Health and Safety Code sections 25250.50, 25250.60 and 58012. Reference: Health and Safety Code section 25260.60.
1. New section filed 9-30-2016; operative 1/1/2017 (Register 2016, No. 40).