Section 1065 - Transportation(a) The transportation of flamethrowing devices shall meet the following security, fire, and life safety requirements:(1) When the size or quantity of flamethrowing devices permits storage inside the vehicle, the flamethrowing devices shall be transported either concealed in the locked storage area of the vehicle or in a locked metal box or the equivalent which is permanently affixed to the vehicle.(2) When the size or quantity of the flamethrowing devices prohibit the storage inside the vehicle or trailer, a locking device connecting the flamethrowing device to the vehicle or trailer is required.(3) The locking mechanisms shall be able to resist common tools such as bolt cutters, hammers and cold chisels.(4) If the flamethrowing device is mounted on its own axle or transported on a trailer, the trailer shall be rendered incapable of unauthorized movement while connected or disconnected from the tow vehicle.(5) All locking or security devices required by these regulations shall be maintained in good operating condition at all times.(6) Flamethrowing devices shall be constantly attended during transportation.(7) Inoperative flamethrowing devices need not be constantly attended provided the vehicle is locked while unattended.Cal. Code Regs. Tit. 19, § 1065
1. New section filed 6-17-2010; operative 7-17-2010 (Register 2010, No. 25). Note: Authority cited: Section 12756, Health and Safety Code. Reference: Section 12756, Health and Safety Code.
1. New section filed 6-17-2010; operative 7-17-2010 (Register 2010, No. 25).