Cal. Code Regs. tit. 17 § 95124

Current through Register 2024 Notice Reg. No. 25, June 21, 2024
Section 95124 - Lead Production

The operator of a facility who is required to report under section 95101(a)(1)(B) (8.) of this article, and who is not eligible for abbreviated reporting under section 95103(a), must comply with Subpart R of 40 CFR Part 98 (§§ 98.180 to 98.188) in reporting stationary combustion and process emissions and related data from lead production to ARB, except as otherwise provided in this section.

(a)CO2 from Fossil Fuel Combustion. When calculating CO2 emissions from fossil fuel combustion at a stationary combustion unit under 40 CFR § 98.182(d), the operator must use a method in 40 CFR § 98.33(a)(1) to § 98.33(a)(4) as specified by fuel type in section 95115 of this article.
(b)Monitoring, Data and Records. For each emissions calculation method chosen under section 95124(a), the operator must meet the applicable requirements for monitoring, missing data procedures, data reporting, and records retention that are specified in 40 CFR § 98.34 to § 98.37, except as modified in sections 95115, 95118(c)-(d), and section 95129 of this article.
(c)Missing Data Substitution Procedures. The operator must comply with 40 CFR § 98.185 when substituting for missing data, except as otherwise provided in paragraphs (1)-(3) below.
(1) To substitute for missing data for emissions reported under section 95115 of this article (stationary combustion units and units using continuous emissions monitoring systems), the operator must follow the requirements of section 95129 of this article.
(2) If the annual mass or carbon content of carbon-containing inputs are missing when using the process emissions calculation procedure in 40 CFR § 98.183(b)(2), the operator must apply substitute values according to the procedures in paragraphs (A)-(B) below.
(A) If the analytical data capture rate is at least 80 percent for the data year, the operator must substitute for each missing value according to 40 CFR § 98.185(a) and the number of days per month.
(B) If the analytical data capture rate is less than 80 percent for the data year, the operator must substitute for each missing value with the maximum capacity of the system and the number of days per month.
(3) The operator must document and keep records of the procedures used for estimating missing data pursuant to the recordkeeping requirements of section 95105.
(d)Additional Product Data. The operator of a lead production, recycling, recovery, or manufacturing facility must report production of lead and lead alloys during the data year (short tons).

Cal. Code Regs. Tit. 17, § 95124

1. New section filed 12-31-2013; operative 1-1-2014 pursuant to Government Code section 11343.4(b)(3) (Register 2014, No. 1).
2. Amendment of subsections (c), (c)(2)(A) and (d) filed 12-31-2014; operative 1-1-2015 pursuant to Government Code section 11343.4(b)(3) (Register 2015, No. 1).

Note: Authority cited: Sections 38510, 38530, 39600, 39601, 39607, 39607.4 and 41511, Health and Safety Code. Reference: Sections 38530, 39600 and 41511, Health and Safety Code.

1. New section filed 12-31-2013; operative 1-1-2014 pursuant to Government Code section 11343.4(b)(3) (Register 2014, No. 1).
2. Amendment of subsections (c), (c)(2)(A) and (d) filed 12-31-2014; operative 1/1/2015 pursuant to Government Code section 11343.4(b)(3) (Register 2015, No. 1).