Section 3363.4 - Installation Standards Applicable to Ignition Interlock DevicesAn automotive repair dealer who installs, maintains, or services any ignition interlock device shall:
(a) Prohibit customers or other unauthorized persons from observing the installation, maintenance, or servicing of an ignition interlock device.(b) Have all tools, test equipment, and manuals, needed to install an ignition interlock device and to screen vehicles for acceptable mechanical and electrical conditions prior to installation.(c) Provide adequate security measures to prevent unauthorized persons from accessing secured materials (tamper seals or installation instructions).(d) Install an ignition interlock device in a vehicle taking into account the condition of the vehicle's mechanical and electrical systems.(e) Install an ignition interlock device following accepted trade standards and instructions from the ignition interlock device manufacturer.(f) Verify that the ignition interlock device is functioning properly after it has been installed in the vehicle.(g) Ensure that an ignition interlock device is not installed in a manner that could adversely affect the performance of the ignition interlock device or impede the safe operation of the vehicle.(h) Restore a vehicle to its original condition when an ignition interlock device is removed. All severed wires must be permanently reconnected and insulated with heat shrink tubing or equivalent.Cal. Code Regs. Tit. 16, § 3363.4
1. New section filed 1-26-89; operative 2-25-89 (Register 89, No. 7).
2. Amendment of section and NOTE filed 7-7-2014; operative 10-1-2014 (Register 2014, No. 28). Note: Authority cited: Sections 9882 and 9882.14, Business and Professions Code. Reference: Section 9882.14, Business and Professions Code.
1. New section filed 1-26-89; operative 2-25-89 (Register 89, No. 7).
2. Amendment of section and Note filed 7-7-2014; operative 10-1-2014 (Register 2014, No. 28).