Cal. Code Regs. tit. 13 § 1061

Current through Register 2024 Notice Reg. No. 49, December 6, 2024

Section 1061 - Air Governor Adjustment

Air compressor governors shall be adjusted to operate as follows:

(a) Cut-in Pressure. Cut-in pressure shall not be less than 85 psi for full air brake systems on any motor vehicle and not less than 65 psi for air-assisted hydraulic brakes on motor vehicles with a gross vehicle weight rating of not more than 25,000 pounds.

(b) Cutout Pressure. Cutout pressure shall not be more than 130 pounds per square inch unless the maximum air delivered to the brake system reservoir is regulated to provide between 100 and 130 pounds per square inch, in which case the cutout pressure shall be adjusted to not more than 150 pounds per square inch.

Cal. Code Regs. Tit. 13, § 1061

1. Amendment filed 1-30-80; designated effective 3-1-80 (Register 80, No. 5).

Note: Authority cited and Reference: Section 26504, Vehicle Code.

1. Amendment filed 1-30-80; designated effective 3-1-80 (Register 80, No. 5).