Cal. Code Regs. tit. 13 § 667

Current through Register 2025 Notice Reg. No. 2, January 10, 2025

Section 667 - Warpage Test

Lighting equipment with plastic lenses, reflectors or housings shall be subjected to warpage tests on separate samples as follows:

(a) Devices with a light source shall be mounted in normal operating position and operated at rated voltage in a circulating air cabinet for 1 h at 49 ± 2.8 C (120 ± 5 F). Each device shall be operated during the test in the same manner as it will be operated in service.

(b) Reflex reflectors without a light source shall be mounted in normal position in a circulating air cabinet for 2 h at 74 + 0, - 2.8° C (165 + 0, - 5° F).

(c) At the conclusion of each test, there shall be no evidence of lens, reflector, or housing warpage that would affect the proper functioning of the device.

Cal. Code Regs. Tit. 13, § 667

Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 24012 and 26103, Vehicle Code.

Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 24012, and 26103, Vehicle Code.

1. Change without regulatory effect amending subsection (a) filed 8-26-2024 pursuant to section 100, title 1, California Code of Regulations (Register 2024, No. 35).