Cal. Code Regs. tit. 13 § 630
Current through Register 2024 Notice Reg. No. 50, December 13, 2024
Each lens and housing shall be permanently and legibly marked with the manufacturer's or vendor's name, initials or lettered trademark, the model designation, and other specified markings. Lens markings need not be the same as housing markings. Markings shall be imprinted on a permanently attached nameplate, die-stamped, or molded in the locations specified in this title. In lieu of other methods of marking, gaseous discharge bulbs, flashers, and the backs of sealed optical units may be marked with indelible ink.
Cal. Code Regs. Tit. 13, § 630
Note: Authority cited: Section 26103, Vehicle Code. Reference: Sections 24006 and 26103, Vehicle Code.