005.30.21 Ark. Code R. 001
INTRODUCTION
Two pieces of legislation offered the opportunity to RETHINK CTE in Arkansas: At the federal level, the Carl D. Perkins Strengthening Career and Technical Education for the 21stCentury Act (2018) commonly referred to as Perkins V is enacted through the Arkansas Perkins V State Plan approved by the US Department of Education and State Board of Education. At the state level the Arkansas Transformation and Efficiencies Act (2019), commonly referred to as Transformation, moved the Division of Career and Technical Education (DCTE) under the Arkansas Department of Education (ADE). Both legislate new resources and approaches to preparing all students for college and career success to develop a skilled workforce. With the opportunity to rethink CTE in Arkansas comes the opportunity to transition to a student-focused, customer-service and equity model for excellence in education for all students.
Two specific areas where this will be apparent in addition to the Perkins V State Plan are:
STATEMENT OF ASSURANCE
All career and technical education opportunities are offered without regard to race, color, national origin, sex, disability, or age. The following civil rights laws protect individuals from discrimination in programs or activities receiving federal financial assistance:
* Title IV of the Civil Rights Act of 1964
* Title IX of the Education Amendments of 1972
* Section 504 of the Rehabilitation Act of 1973
* Age Discrimination Act of 1975
* IDEA
For Additional Information: https://www2.ed.gov/about/offices/list/ocr/reports-resources.html
THE USE of "SHALL"
The use of "shall" indicates that the activity is required.
CAREER AND TECHNICAL EDUCATION DESIGN AND DEVELOPMENT
CTE Participant
An individual at either the secondary or postsecondary level who completes at least one CTE course in an approved CTE program or program of study. (AR State Perkins V Plan, Appendix N, p. 154) CTE Participant data is monitored at the state level but is no longer a federal accountability measure.
Special Populations
Definitions and policies related to serving students who are members of "special populations" shall be in compliance with Carl D. Perkins Strengthening Career and Technical Education for the 21stCentury Act (2018). "Special populations" are defined within Perkins V as individuals with disabilities; individuals from economically disadvantaged families, including low-income youth and adults; individuals preparing for non-traditional fields, single parents, including single pregnant women; out-of-workforce individuals; English learners; homeless individuals described in section 725 of the McKinney-Vento Homeless Assistance Act (42 U.S.C. 11434a); youth who are in, or have aged out of, the foster care system; and youth with a parent who is a member of the armed forces and is on active duty.
Each student identified as an individual with a disability under the guidelines of the Special Education Section of ADE and admitted to a career and technical education program(s) or program(s) of study shall have an Individualized Education Plan (IEP) developed prior to participating in Career and Technical Education.
Each student who meets the criteria for identification as a member of a special population shall be provided with vocational assessment, guidance, counseling, and career development in order to support his/her success in their chosen CTE program or program of study.
Transition services as well as supplemental/support services shall be provided as needed to assist students with disabilities in making the transition from school to employment.
Arkansas provides focused support for students from special populations to ensure they have access to the information they need to make informed choices about their college and career pathway. Perkins V focuses on equity and access to close gaps in academic achievement and the attainment of technical skills for special populations. Programs such as Career Coaches and JAG assist with high-risk students and minority students.
A part of focused support for special populations includes CTE training for teachers in awareness of Universal Design for Learning, a scientifically valid framework for guiding educational practice, providing flexibility in how information is presented, how students can respond or demonstrate knowledge and skills, and how students are engaged. These practices help to reduce barriers in instruction; provide appropriate accommodations, supports and challenges; and maintain high achievement expectations for all students, including those with disabilities and those who have limited English proficiency.
Concentrator
A concentrator is a key component of Perkins V federal accountability performance measures. The federal definition states: The term 'CTE concentrator' means- ''(A) at the secondary school level, a student served by an eligible recipient who has completed at least 2 courses in a single career and technical education program or program of study; and ''(B) at the postsecondary level, a student enrolled in an eligible recipient who has- ''(i) earned at least 12 credits within a career and technical education program or program of study; or ''(ii) completed such a program if the program encompasses fewer than 12 credits or the equivalent in total." A CTE concentrator is a student who has completed two (2) courses within a career cluster.
Completer
A completer is not a federal Perkins accountability measure but is recognized at the state level. A CTE program of study completer is a student who completes at least three (3) courses in a single career and technical education program of study. Although industry-recognized certifications are an expectation when completing a program or program of study, students may still be recognized as a completer if they do not attain an industry-recognized certification. This includes the courses at Level 1, Level 2, and Level 3 within an approved single program of study. A CTE completer is a student who has completed three (3) courses within a career cluster.
Career Clusters
The National Career Clusters ® - Framework serves as an organizing tool for the Division of Career and Technical Education (DCTE) programs, curriculum design and instruction. The framework also functions as a guide in developing programs of study bridging secondary and postsecondary systems, and for creating individual student plans of study.
Career focus programs of study make up the career and technical delivery system as outlined in the National Career Clusters ® Framework:
* Agriculture, Food & Natural Resources | * Hospitality & Tourism |
* Human Services | |
* Architecture & Construction | * Information Technology |
* Arts, A/V Technology & Communications | * Law, Public Safety & Security |
* Manufacturing | |
* Business, Management & Administration | * Marketing, Sales & Service |
* Education & Training | * Science, Technology, Engineering & Mathematics |
* Finance | * Transportation, Distribution & Logistics |
* Government & Public Administration | |
* Health Science |
Each career focus program of study shall consist of middle-level courses in grades 7 or 8 as defined by DCTE. Two (2) courses are required in grades 9-12 to be considered a Concentrator following the approved single program of study sequencing. Three (3) courses are required in grades 9-12 to be considered a Completer within an approved single program of study.
Career Field
A career field means the organizing structure for the 16 career clusters and 38 pathways under The National Career Clusters® Framework. The fields represent the broadest aggregation of careers. Students are generally exposed to career field exploration in middle school and early high school.
Career Pathway
A career pathway means the structure of related occupational areas within a specific career cluster. These pathways have identified knowledge and skills validated by industry from which programs and programs of study are developed.
Career Planning
Upon completion of the eighth grade, each student shall have on file a Student Success Plan, either hardcopy or electronic format, which includes secondary courses to be taken. At least two years of postsecondary education planning is recommended. The Student Success Plan shall be revisited each year for any necessary adjustments. Parents/guardians shall be involved in the education and career planning process, with signatures documenting involvement each year.
Course
A course means the equivalent to one full unit of credit in the specific program of study.
Foundation Courses
Foundation courses are those classes that encompass the skills and knowledge necessary to be successful in any selected DCTE career and technical education program or program of study. These courses are pre-requisite in nature and are required for all career and technical program approvals as defined by DCTE. Please see the DCTE website for a current list of CTE Foundation Courses, listed as Level 1 courses within each program of study.
CTE Teacher Contract Length
Local school districts governing authority shall have the option of extending the length of CTE teachers' contracts beyond the minimum number of contract days required by the Standards for Accreditation of Public Schools.
Exception: State law requires twelve (12) month contracts for Agricultural Education teachers.
Curriculum Content Standards
Each teacher shall follow Arkansas curriculum/content standards for each course approved by DCTE. See the DCTE website occupational areas for current standards. All standards will be reviewed every two years.
Digital Learning Providers
DCTE courses may be delivered by approved digital providers. See the ADE website for a list of providers, description of the process, and guidance on selected digital learning providers http://dese.ade.arkansas.gov/divisions/learning-services/digital-learning-providers.
Embedded Courses
In order for the standards of all courses to be met in a high-quality and comprehensive manner, embedded courses are not recommended. Under extenuating circumstances, districts may submit a detailed plan in the Arkansas Department of Education Course Approval System (CAS) (https://adedata2.arkansas.gov/CAS/Account/Login?ReturnUrl=%2fcas) and shall not be initiated unless approval is received in the CAS.
Teachers of embedded courses shall be licensed in both courses.
CTE PROGRAMS OF STUDY AND CTE MODIFIED PROGRAMS
For Grades 9-12, the following content areas shall be offered annually for a total of 38 units, except as otherwise allowed by law and these rules. The list of courses, approved by the State Board of Education for each content area, is posted annually on the Division website.
1-A.1.3.9 Career and Technical Education - 9 units of sequenced career and technical education courses representing three (3) occupational areas.
For implementation of SFA requirements for CTE, districts shall offer annually (3) approved program of study in (3) different occupational areas. The CTE requirements can be found on the Standards for Accreditation website at https://adedata.arkansas.gov/sfa under ADE Rules Governing the Standards for Accreditation of Arkansas Public Schools and School Districts.
Each Occupational Area defines the required entry level (foundation) course for each Program of Study. Foundation courses shall be offered annually and Level 2 and Level 3 courses may be offered on a two year rotating basis.
Schools who do not offer required programs of study on campus may utilize public schools, secondary technical centers, or postsecondary institutions to meet requirements upon a written request from the high school for approval by DCTE.
The Career and Technical Student Organization (CTSO) may operate on the local high school campus or at the secondary technical center campus.
If occupational programs are offered off-site to fulfill Standards for Accreditation requirements, the school shall provide student transportation, sufficient time to complete a three-unit program of study, and sufficient effort to provide these opportunities to students.
Secondary schools utilizing off-campus options as a means to meet Standards for Accreditation shall have on file with the Director of DCTE a written agreement between both institutions as documentation to this effect before October 1 of each academic year.
Schools shall upload documentation of concurrent enrollment or other agreements annually in the DCTE electronic reporting system to meet documentation for Standards for Accreditation requirements.
Note: Waivers from the Standards for Accreditation (SFA) require State Board of Education approval.
CTE Programs of Study (POS)
Arkansas follows federal Perkins V legislation to define a 'Program of Study'; the complete definition is: "A coordinated, non-duplicative sequence of academic and technical content at the secondary and postsecondary level that:
See the DCTE website Occupational Areas Tab for approved Programs of Study, including course codes and industry-recognized credentials. Refer to State Standards for Accreditation (SFA) for program of study requirements to meet SFA.
Schools that, due to local business and industry requirements or school improvement plans, need consideration for extenuating circumstances to meet the needs of the students, should submit a request through the Arkansas Department of Education Course Approval System (CAS) (https://adedata2.arkansas.gov/CAS/Account/Login?ReturnUrl=%2fcas) and shall not be initiated unless approval is received in the CAS.
CTE PROGRAM OF STUDY SIZE, SCOPE, AND QUALITY
All schools shall demonstrate through their Comprehensive Local Needs Assessments and local applications that they have satisfied the applicable definitions of size, scope, and quality of their CTE programs of study. Size, Scope, and Quality is defined within the Arkansas Perkins V State Plan approved by the State Board of Education and the U.S. Department of Education, Office of Career, Technical, and Adult Education (OCTAE).
Size
* Class periods shall conform to the minimum class hours established by the Arkansas Department of Education Standards for Accreditation of Public Schools.
* Enrollments may vary and will depend on the availability of equipment, tools, furniture, and instructional materials that support the program.
* Program equipment requirements and safety conditions shall be a consideration in establishing class size.
Scope
* Schools shall offer one approved CTE Program of Study from three different Occupational Areas annually. Each Occupational Area defines the required entry level (foundation) course for each Program of Study. Foundation courses shall be offered annually. (Level 2 and Level 3 courses may be offered on a two year rotating basis). (CTE Programs shall meet all Perkins requirements to count toward SFA).
* Each CTE Occupational Area issues equipment lists annually. The equipment lists are considered the minimum equipment necessary for students to master the program area standards established by DCTE.
* The current version of equipment lists applies to new programs being implemented during the school year in which the equipment lists are issued.
Quality
* Approved programs of study are to follow all policies and procedures as well as program guidelines established and identified in the supplemental program operational guides and by approval of the Director of DCTE and/or their designee.
* Programs of study are expected to culminate in an industry-recognized technical skills assessment and/or certification (or an approved substitute), shall meet or show improvement in documented performance indicators, shall remove all critical elements identified in tiered support visits, and follow all required program guidelines. (A.C.A. § 6-51004)
* Approved programs of study and programs will be reviewed annually to ensure quality.
* Comply with Office of Civil Rights Methods of Administration (MOA) procedures and regulations, and CTE Monitoring and Risk Assessment Reviews.
* Each approved program of study shall participate in a regional stakeholder meeting with diverse representation including industry applicable to the program area as outlined in Perkins V. Improvements to programs may occur based on information and recommendations made by stakeholders.
* Offer CTE programs of study and programs that lead to one or more of the following:
* High-skill occupations - occupations that require an industry-credential of value, postsecondary training, apprenticeship, or degree.
* High-wage occupations - an average hourly rate equal to or greater than the average hourly rate of all similar occupations as reported by the Arkansas Department of Labor.
* In-demand occupations - an industry sector that has a substantial current or potential impact (including through jobs that lead to economic self-sufficiency and opportunities for advancement) on the state, regional, or local economy, as appropriate, and that contributes to the growth or stability of other supporting businesses, or the growth of other industry sectors.
Arkansas Definition of a CTE Modified Program
A CTE Modified Program is not federally defined so that states may develop their own definition where necessary. Arkansas' Division of Career and Technical Education defines a Modified Program as:
A CTE Program: A set of courses and related learning experiences that enhance a student's acquisition of long-term academic and technical knowledge and skills, including employability skills; and is aligned with the needs of industries in the economy of the State, region, or local area. Programs shall include essential standards and skills that provide occupational-based instruction within a Career Cluster; through an innovative structure and implementation process that does not fit the program of study definition. Programs will incorporate challenging State academic standards or essential standards, skills, and competencies, including those adopted by the State under section 1111(b)(1) of the Elementary and Secondary Education Act of 1965. Where possible, students may utilize an industry recognized certificate to progress to postsecondary education with multiple entry and exit point opportunities. An approved CTE Modified Program shall meet the above and include work-based learning, industry partner collaboration, and entrepreneurial opportunities when feasible. Concurrent courses approved by higher education would meet this requirement.
Approved CTE programs may not meet the program of study requirements for Standards for Accreditation (1-A.1.3.9) and cannot be substituted for the required CTE Programs of Study.
CTE Modified Program Requirements
A CTE Modified Program is a district option that differs from a CTE Program of Study as defined by federal Perkins requirements. A program is designed to give additional flexibility to a school district but cannot take the place of the Program of Study under the Standards for Accreditation (1-A.1.3.9).
A CTE Modified Program shall:
Perkins funding may be available for CTE Modified Programs if they meet all Perkins federal requirements including:
Note: Secondary technical center programs on post-secondary campuses are funded through the Office of Skills Development.
Industry-Recognized Postsecondary Credential
A credential consisting of an industry-recognized certificate or certification, a certificate of completion of an apprenticeship, a license recognized by the state involved or Federal Government, or an associate or baccalaureate degree. In Arkansas, certificates awarded by two-year and four-year institutions are also recognized as a recognized postsecondary credential.
STATE START-UP GRANTS
Annually, State Start-Up grants are provided on a competitive basis to assist with the start-up expenses of a new program of study. Occupational area grant awards shall be available for the exclusive purpose of purchasing new equipment and program specific supplies, required training, assessment, and software to support newly approved career focus programs of study.
Additional details about State Start-Up grants can be found on the DCTE website at the following link: https://dcte.ade.arkansas.gov/Page/FundingAndAccountability.
EQUIPMENT, FACILITIES, AND SAFETY
Adaptive Equipment for CTE Students with Disabilities
Adaptive Equipment for Individuals with Disabilities Enrolled in Funded Vocational Education Programs can be obtained through Appropriation 681, through the following process:
Equipment (Inventory)
A small portable item is an item that is priced under the $1,000 equipment criteria (or even under $500) and has a life expectancy of one year. This item also is not likely to be missed immediately upon its disappearance. Examples include, but are not limited to, tablets, laptops, cameras, shop tools, etc. A recipient's internal controls shall be sufficient to account for all such purchases made with federal and/or state funds. This is why DCTE requires items costing more than $500 and "walkables" be maintained in inventory.
DCTE retains a vested interest in the equipment purchased with the Perkins funds for its useful life cycle (currently five years). If the program/project for which it was purchased is discontinued or if the equipment is no longer needed in the program, a request shall be made through the Accountability and Perkins Program Coordinator to reassign the equipment as outlined in 2 CFR § 200.313. Equipment shall be used in the program or project for which it was acquired as long as needed. When no longer needed for the original program or project, the equipment shall be used in other activities in the following priorities:
Equipment (Uses)
Equipment uses shall always be for educational purposes. No equipment purchased through Perkins grant funding or state start-up funding shall be used for any purpose other than educational use to train students enrolled in the program area for which the equipment was purchased.
Minimum Equipment Lists
Each Career and Technical Education (CTE) Occupational Area issues minimum equipment lists annually. The equipment lists are considered the minimum equipment necessary for students to master the program area standards established by the Division of Career and Technical Education. The current version of equipment lists applies to new programs of study being implemented during the school year in which the equipment lists are issued. Equipment lists may be located at the Division's Occupational Areas web page. Secondary centers located on a post-secondary campus have flexibility on the equipment utilized according to equipment approved by the Office of Skills Development through the Career Education Workforce Development Board.
Facilities
Facility requirements shall meet Arkansas Department of Education guidelines https://dpsaft.ade.arkansas.gov/facilities/arkansas-school-facilities-manual. Equipment requirements may be obtained from the appropriate Occupational Area office and shall be met within the specified time for program approval.
Safety
Space and special equipment for CTE labs are varied and unique. Safety should be of the utmost consideration at all times in planning a facility and locating equipment. Sufficient electrical power should be included to support major pieces of equipment in the lab, including a sufficient number of electrical outlets. OSHA standards shall be followed where applicable.
A student wash-up area and proper exhaust and filtration of harmful fumes/dust shall be provided according to the facilities requirements document: http://arkansasfacilities.arkansas.gov/public/userfiles/documents/Facilities_Manual_20162017/FM_Career_Education.pdf. The laboratory shall be zoned and color-coded identifying specific work areas and pedestrian walkways. Large open areas for instructional activities shall be provided.
Caution shall be exercised and enrollment shall be limited so that an overcrowded situation does not occur. For the specifications for the lab areas, please see the Arkansas Facilities website linked in the Facilities section above.
SECONDARY TECHNICAL CAREER CENTERS
Secondary Technical Career Centers (STCs) provide additional CTE opportunities to students. STCs are offered on high school and post-secondary campuses. Secondary Technical Centers are managed through the Department of Commerce, Office of Skills Development (OSD) through an annual Memorandum of Understanding with the Arkansas Department of Education in collaboration with DCTE for CTE programs and programs of study offered and secondary career centers.
High School Students attending Postsecondary Institution Secondary Technical Centers (STCs)
* DCTE Program definition and guidelines
* ADE: DCTE approved course codes
* DCTE approved CTE programs of study or approved CTE modified programs
* DCTE minimum equipment lists or postsecondary institution appropriate/equivalent equipment identified for their institution
* Teacher qualifications and rules governing awarding credit (secondary technical centers shall follow special rules for secondary technical centers: https://arcareereducation.org/docs/default-source/skills-and-development/secondary-technical-centers/policies-and-procedures/secondary-center-policies-procedures_effective-8-25-18.pdf?sfvrsn=6b4a4116_2)
* Established process for enrollment verification
* Other related applicable policies and procedures shall follow DCTE Policies and Procedures/Rules
CTE approved programs seeking Perkins federal funding shall also follow:
* All federal Perkins V requirements with the exception of the sequence of courses.
* Follow program evaluation including annual documentation for tiered support, and other processes according to federal Perkins and other federal and state law requirements.
Secondary Center Tiered Funding shall follow ACA 6-20-2305:
Beginning with the 2020-2021 school year, secondary vocational area center funding shall be established by a tiered funding structure for distributing vocational center aid for each full-time equivalent student, as defined by the Division of Career and Technical Education. The funding to support secondary vocational centers shall be determined by the Division of Career and Technical Education, in consultation with the Office of Skills Development, and approved by the State Board of Education.
The State Board of Education shall review recommendations from the Career Education and Workforce Development Board to establish new vocational centers to serve high school students from several school districts in locations where services are needed to:
The Office of Skills Development shall provide annually a report to the State Board of Education on the financial viability of vocational centers, enrollment, programs, and the success of students.
Secondary technical centers shall follow the program approval process for new programs according to the Office of Skills Development. Funding, assurance of quality and safety, technical assistance, and all other needs are provided by the Office of Skills Development and/or the postsecondary institution. If the Secondary technical center has an approved program of study through DCTE, all guidelines shall be met following federal Perkins V requirements and accountability.
Resource: Act 179 of 2019:
Resource: Special Secondary Technical Center Rules of 2018:
TEACHER LICENSURE AND TRAINING
CTE teachers' licensure shall be submitted through the Arkansas Department of Education, Division of Elementary and Secondary Education Office of Educator Licensure. See the ADE Division of Educator Effectiveness, Office of Educator Licensure web page on educator licensure https://dese.ade.arkansas.gov/Offices/educator-effectiveness/educator-licensure for a complete description.
A public school, agency, or organization may apply for an exception from the requirement under Ark. Code Ann. § 6-15-1004 for a licensed educator if it imposes an undue hardship for a school to timely fill a vacant position with a qualified individual licensed in the required licensure content area and level of licensure. Exceptions require approval by the State Board of Education.
The exceptions are:
* Additional Licensure Plans (ALP) and Administrator Licensure Completion Plans (ALCP); or
* Long-Term Substitute Teacher; or
* Emergency Teaching Permit
An emergency teaching permit authorizes the permit holder to be hired to fill a vacant teaching position without a license.
Career and Technical Education (CTE) teachers will be provided district supported mentoring which will include Teacher Excellence and Support System professional learning. Additionally, job-embedded Professional Learning Communities (PLC) are being organized to offer an opportunity for those who may be Singletons to increase their professional learning.
Career and Technical Education Degreed Teacher Licensure
Program Area | License/Permit | Type |
Agriculture Science & Technology | 218 Agriculture Science & Technology | Approved Standard License |
Family & Consumer Sciences | 215 Family & Consumer Sciences | Approved Standard License |
Business & Marketing | 250 Business Technology (4-12) 225 Business Tech grades (7-12) | Approved Standard License |
STEM | 575 Drafting & Design (7-12) 606 Pre-Engineering (7-12) 624 Biomedical (7-12) 627 Aviation Flight Technology (7-12) | Approved Technical Permits |
*Please refer to the Division of Elementary and Secondary Education, Office of Educator Licensure, for a complete list of teacher licensures and endorsements:
https://dese.ade.arkansas.gov/Files/20201102144720_Licensure_Areas_Chart_2018.pdf.
Career and Technical Education Endorsements
To add an endorsement, the applicant shall have a current, valid 7-12 standard teaching license. Endorsements cannot be added to a technical permit.
Driver Education Endorsement
Driver's Education endorsement requirements are completed through the Division of Elementary and Secondary Education, Office of Educator Licensure beginning on July 1, 2021.
Teacher Qualifications for Career Development Endorsements (418)
Or
Counselors who attend the Career Guidance New Teacher Professional Development provided by DCTE shall meet state licensing standards to add the endorsement.
Teacher Qualifications for the Career Preparation Endorsement (412) Grades 9-12
The 412 endorsement is required for the following courses:
Endorsement - The instructor shall:
Teacher Qualifications for JAG (413)
It is strongly recommended that during the first year of operation the JAG Specialist be employed on a contract of a minimum of 215 days. It is also strongly recommended that during each subsequent year the Specialist be employed on a contract of a minimum of 225 days. The contract is a local decision, and the recommendation is made to provide the greatest level of support for the JAG Specialist.
Teacher Qualifications for Freshman Seminar/Keystone (410)
Required Training
CTE teachers shall complete New Career In-service Program Area training in order to teach CTE courses. Individual occupational areas may have additional training requirements. Information on training can be obtained through the relevant occupational area office.
Professional Development
Under Perkins V, Career and Technical Education Professional Development is an integral part of providing education, knowledge, and skills necessary to empower students to succeed in CTE while meeting state academic standards. The professional development shall be sustained (not standalone, more than one-day or short-term workshops), intensive, collaborative, data-driven, and classroom-focused for administrators, teachers, and faculty to foster high-quality POS design, implementation, certification, and maintenance. Professional development may be offered in person, online, or a hybrid format.
The term 'professional development' means activities that:
Teacher Qualifications for Freshman Seminar/Keystone (410)
Teacher Qualifications for DCTE Technical Permit Areas
Experienced professionals may be issued a DCTE provisional technical permit. The requirements include a minimum of an associate degree with two years of relevant work experience in the specialty area to be taught or four years of relevant work experience in the specialty area to be taught. Minimum education requirements/work experience shall be met prior to employment in the teaching specialty, verification of high school diploma or high school equivalency diploma. All candidates shall pass the required background checks. DCTE reserves the right, when considering the issuance of a technical permit, to afford consideration of an applicant's related industry experience, education, skillsets, and credentials
Candidates shall submit the following documents to the ADE Office of Educator Licensure:
Provisional permits (employment required) will be valid for one (1) year from the date of the approved applicants hire date. In extenuating circumstances, a second one (1) year provisional permit may be issued to allow additional time for completion of the specialty area requirements to obtain a standard five (5) year permit. A new application shall be submitted for permit renewal.
The following programs of study shall maintain accreditation by the ASE Education Foundation (formerly NATEF):
The following programs of study shall maintain accreditation by the National Center for Construction Education and Research (NCCER):
* Construction Technology
* Welding
Concurrent Credit Teacher Approval
https://drive.google.com/file/d/1NDqR2eMaq7s7vv9B36E5naZYI_r-Drei/view
https://drive.google.com/file/d/1NDqR2eMaq7s7vv9B36E5naZYI_r-Drei/view
Technical instructors teaching at a STC operated by a two-year community/technical college shall have a minimum of an associate degree within the area of instruction, have completed all necessary background checks, and met all college accrediting standards for instructors. Secondary technical centers shall follow Rules for Secondary Technical Centers.
Centers will annually submit a list of instructors providing concurrent credit and in meeting the above requirements, will be given an annual waiver from teacher licensure requirements. Those instructors not meeting these requirements or instructors teaching non-concurrent credit classes shall hold an Arkansas Teacher's License/Technical Permit as required by DCTE.
WORK-BASED LEARNING
Work-Based Learning (WBL) is the umbrella term that all WBL opportunities fall under. These can include non-credit options such as job shadowing, skill-based projects, career fairs, industry tours, guest speakers from industry, etc. WBL is the nationally recognized term for all experiences that involve stakeholders. WBL includes industry-focused experiences that provide an opportunity for students to explore and engage in the learning and skills necessary to prepare them for the future workforce.
The Perkins V federal definition of Work-Based Learning (WBL) is "sustained interactions with industry or community professionals in real workplace settings, to the extent practicable, or simulated environments at an educational institution that foster in-depth, first-hand engagement with the tasks required in a given career field, that are aligned to curriculum and instruction." page 31, Perkins V: The Official Guide to Strengthening Career and Technical Education for the 21st century Act. The sustained interactions to meet federal requirements are through WBL courses outlined below:
* Internship
* Career Practicum
* Pre-Apprenticeship
Students can engage in WBL opportunities and courses including both classroom instruction and worksite experience. A Training Plan shall be developed between the student, teacher, and workplace supervisor The WBL Coordinator and the workplace mentor will evaluate the student. Additional details about these WBL courses include:
Internship
The Internship course may be paid or unpaid. The course will serve as an introductory work experience course for 10-12 grade students. This course is eligible for an employer tax credit according to AR Code § 26-51-509 (2018). This course does not count toward completer status.
*Please refer to the Internship Instructor Manual for specific details:https://dcte.ade.arkansas.gov/Page/WorkBasedLearning.
Career Practicum
The Career Practicum course is a paid or unpaid work experience that aligns to a student's program of study offered to students in grades 11-12 to help students transition successfully from high school to career. To be eligible, students shall:
This course is eligible for an employer tax credit according to ACT 1042. It is considered an eligible course for completer status following the completion of concentration in a single program of study.
*Please refer to the Career Practicum Instructor Manual for specific details:https://dcte.ade.arkansas.gov/Page/WorkBasedLearning.
Pre-Apprenticeship
The Pre-Apprenticeship program is a program that provides instruction or training to increase math, literacy, and other vocational and prevocational skills needed to enter a Registered Apprenticeship program. Pre-Apprenticeship programs are not registered with the United States Department of Labor during the term of the pre-apprenticeship training or federally vetted. A high-quality pre-apprenticeship program should have a minimum of one registered apprenticeship partner or a strong relationship with at least one apprenticeship program, feature training and curriculum that aligns with the program, and include a wide range of support services designed specifically to help participants succeed.
*Please refer to the Pre-Apprenticeship Instructor Manual for specific details:https://dcte.ade.arkansas.gov/Page/WorkBasedLearning
Documentation Required for Work-Based Learning
The WBL Coordinator will be responsible for submitting all required documentation to the State Office for all work-based learning course options.
Internship Teacher Supervision Period Required for all Work-Based Learning
Course Credits for Internship and Career Practicum
Students can earn up to four (4) credits, in a two-year period. To earn two (2) credits PER YEAR, a student will need 36 hours of classroom instruction (at least 1 hour per week) and 240 work hours (approximately 7 hours per week). One (1) credit may be granted for an entire year for students that work 120 hours throughout the year and are in class at least 36 hours.
Hours of Classroom Instruction - Semester | Hours of Work Experience - Semester | Credits Earned |
Minimum 18 hours | 120 hours | 1 credit |
Minimum 36 hours | 240 hours | 2 credits |
Minimum 54 hours | 360 hours | 3 credits |
Minimum 72 hours | 480 hours | 4 credits |
Course Credits for Pre-Apprenticeship
Students can earn up to four (4) credits, in a two-year period. The rate at which the credits are earned is determined by the Department of Labor Registered Apprenticeship partner.
PROGRAM APPROVAL TO MEET FEDERAL REQUIREMENTS
The program approval process is outlined below to clearly articulate the necessary documentation and steps districts should follow to ensure that all federal Carl D. Perkins accountability requirements for their allocation of Perkins funds are met. The program approval process includes the following items:
Perkins V Accountability Metrics
The following items will be reviewed annually to maintain program continuation under federal Perkins V requirements:
As required by Perkins V (section 134(d)), CTE Coordinators shall facilitate a Stakeholder meeting every two years. This meeting shall cover all information relevant to develop the Comprehensive Local Needs Assessment (CLNA) and Local Application, and is the primary source for how funds will be directed at the local level.
Required participants include, at a minimum:
* representatives of career and technical education programs in a local educational agency or education service agency, including teachers, career guidance and academic counselors, principals and other school leaders, administrators, and specialized instructional support personnel and paraprofessionals;
* representatives of career and technical education programs at postsecondary educational institutions, including faculty and administrators;
* representatives of the State board or local workforce development boards and a range of local or regional businesses or industries;
* parents and students;
* representatives of special populations;
* representatives of regional or local agencies serving out-of-school youth, homeless children and youth, and at-risk youth (as defined by the Elementary and Secondary Education Act of 1965);
* representatives of Indian Tribes and Tribal organizations in the State, where applicable; and,
* any other stakeholders that the eligible agency may require the eligible recipient to consult.
Federal Reporting
The Consolidated Annual Report (CAR) is submitted annually to the U.S. Department of Education, Office of Career, Technical, and Adult Education (OCTAE) with Perkins data and narrative sections as required. Data includes the State Determined Performance Levels (SDPLs) and the State's Program Quality Indicators along with finance reports and postsecondary Perkins data and narrative.
Annual Tiered Support (Formerly TA Visit or Onsite Compliance Review)
TIERED SUPPORT REVIEW
Beginning in 2021-22, DCTE will begin full implementation of a tiered support system to include annual desk audits of documentation submitted by the school district and a follow-up onsite visit if necessary. Each district will be evaluated on a yearly basis by DCTE using the CTE Risk Assessment tool. The purpose of this tool is to provide a yearly review to determine the level of tiered support necessary. There is NO minimum required number of visits, rather a threshold that will be set based on the risk assessment to recommend assistance to a district; however, a district can request support at any time. Districts will be evaluated using the following criteria:
Electronic Reporting
For submission of documentation for annual desk audits, DCTE will make available an online reporting tool for electronic reporting. Federal monitoring oversight staff recommend tiered monitoring vs. cycle monitoring. To best support districts and ensure federal requirements are being met, levels of tiered support include:
Tier 1 - Annual Desk Audit completed with upload of documentation into DCTE's electronic reporting system demonstrating federal Perkins requirements are being met.
Tier 2 - Incomplete Desk Audit with absent or incomplete documentation to demonstrate federal requirements are being met. This tier level requires responses to additional questions.
Tier 3 - High-Risk Audit with high-risk findings on the risk assessment. This tier level includes investigation with a deeper look at federal requirements that are not being met along with a letter to the Superintendent. This tier level will be documented as a high-risk with the Arkansas Department of Education, Public School Accountability Office as an identified high-risk from another ADE Division and may include an on-site visit.
On-Site Visits
In addition to Tier 3 High-Risk Audit on-site visits, DCTE conducts on-site visits and will provide onsite visits to districts in support of the following goals:
* To highlight high-quality CTE programs of study and programs;
* To support requirements to meet State Standards for Accreditation of Public Schools;
* To support new teachers;
* To collaborate with CTE Coordinators to review risk assessments and identify schools/districts in need of attention;
* To conduct Methods of Administration (MOA) reviews;
* To conduct State-State Start-Up visits when applicable;
* To conduct Program Approval visits when applicable, and
* To showcase program and/or teacher best practices.
On-site visits will be provided to districts annually and shall be geographically distributed across the state. Districts may also request an on-site team visit which will be scheduled as feasibility allows.
Programs of study are reviewed annually. Programs of study granted approval status shall:
Only CTE Programs of Study or CTE Modified Programs approved by DCTE are eligible for Perkins funding and graduation credit. If program approvals are unavailable due to unforeseen circumstances, Perkins funding and student graduation credit will not be negatively impacted.
Note: In addition to program approval to meet federal requirements, Standards for Accreditation shall be met according to information located at https://adedata.arkansas.gov/sfa.
When Standards for Accreditation have been met, additional CTE courses may be offered. These additional CTE courses are considered to be offered independent of an approved CTE Program of Study (offered as an elective, stand-alone course only) and therefore are not eligible for State Start-Up or Perkins funding.
FULLY APPROVED PROGRAMS | |
If a program received full approval during the previous academic year (AY) and one of the following actions applied the following year, then the district will receive the program status indicated: | |
ACTION | PROGRAM STATUS |
Critical Elements, including Safety Violations and Office of Civil Rights Violations, received from previous Tiered Support Activities (formerly Technical Assistance Visits) | Conditional Approval |
CTSOs maintain membership requirements as defined by national or state bylaws and are active | Conditional Approval |
No program of study | Conditional Approval |
No required foundation courses (reviewed by appropriate program area) | Conditional Approval |
Meets all Division of Career and Technical Education policies and standards | FULL APPROVAL |
CONDITIONALLY APPROVED PROGRAMS | |
If a program was conditionally approved during the previous academic year (AY) and one of the following actions applies the following year, then the district will receive the program status indicated: | |
ACTION | STATUS TO RECEIVE |
Problems are corrected | FULL APPROVAL |
Problems not corrected | Disapproval (see page 26 for requirements) |
Critical Elements, including Safety Violations and Office of Civil Rights Violations, received from previous Tiered Support Activities (formerly Technical Assistance Visits) | Disapproval (see page 26 for requirements) |
Federal Funds
The federal funds received through DCTE shall be used to improve DCTE programs and services for students enrolled in the program of study, which may also include other uses as outlined in Perkins 5, including support and Career Preparation courses. Federal rules and regulations along with the state's approved Perkins V State Plan and local application for the funds shall be followed. Pertinent information regarding the federal CTE funds may be obtained through the Arkansas Perkins V State Plan (posted on DCTE's website) and through the U. S. Department of Education Office of Career, Technical, and Adult Education (OCTAE) at https://cte.ed.gov/.
Methods of Administration (MOA) - Perkins V
Career and Technical Student Organizations (CTSOs)
An organization for individuals enrolled in a career and technical education program that engages in career and technical education activities as an integral part of the instructional program. These include:
* DECA | * HOSA |
* FBLA | * SKILLS |
* FBLA Middle Level | * TSA |
* FCCLA | * Educators Rising |
* FFA |
Career and Technical Student Organizations (CTSOs) are a requirement of the federal Perkins program. The career and technical student organization(s) shall be:
005.30.21 Ark. Code R. 001