Ariz. Admin. Code § 9-7-302

Current through Register Vol. 30, No. 50, December 13, 2024

Section R9-7-302 - Source Material; Exemptions

A. Any person is exempt from this Article to the extent the person receives, possesses, uses, delivers or transfers source material in any chemical mixture, compound, solution, or alloy in which the source material is by weight less than 1/20th of 1 percent (0.0005) of the mixture, compound, solution, or alloy.

B. Any person is exempt from this Article to the extent the person receives, possesses, uses, or transfers unrefined and unprocessed ore containing source material, provided that, the person does not refine or process the ore except as authorized in a specific license.

C. Any person is exempt from the requirements for a license set forth in this Article if the person receives, possesses, uses, or transfers:

1. Any quantities of thorium contained in:

a. Incandescent gas mantles;

b. Vacuum tubes;

c. Welding rods;

d. Electric lamps for illuminating purposes provided that each lamp does not contain more than 50 milligrams of thorium;

e. Germicidal lamps, sunlamps, and lamps for outdoor or industrial lighting, provided that each lamp does not contain more than 2 grams of thorium;

f. Rare earth metals, compounds, mixtures, or products containing not more than 0.25 percent by weight thorium, uranium, or any combination of thorium and uranium; or

g. Individual neutron dosimeters, provided that each dosimeter does not contain more than 50 milligrams of thorium;

2. Source material contained in the following products:

a. Glazed ceramic tableware manufactured before August 27, 2013, provided that the glaze contains not more than 20 percent by weight source material;

b. Glassware containing not more than 2 percent by weight source material or, for glassware manufactured before August 27, 2013, 10 percent by weight source material, but not including commercially manufactured glass brick, pane glass, ceramic tile or other glass or ceramic used in construction; or

c. Piezoelectric ceramic containing not more than 2 percent by weight source material;

3. Photographic film, negatives, and prints containing uranium or thorium;

4. Any finished product or part fabricated of, or containing, tungsten-thorium or magnesium-thorium alloys, provided that the thorium content of the alloy does not exceed 4 percent by weight and that the exemption contained in this subsection does not authorize the chemical, physical, or metallurgical treatment or processing of the finished product or part;

5. Uranium contained in counterweights installed in aircraft, rockets, projectiles, and missiles, or stored or handled in connection with installation or removal of counterweights, provided that:

a. Each counterweight has been impressed with the following legend clearly legible through any plating or other covering: "DEPLETED URANIUM";

b. Each counterweight is durably and legibly labeled or marked with the identification of the manufacturer and the statement: "UNAUTHORIZED ALTERATIONS PROHIBITED";

c. The exemption contained in subsection (C)(5) does not authorize the chemical, physical, or metallurgical treatment or processing of any counterweight other than repair or restoration of any plating or other covering; and

d. The requirements specified in subsections (C)(5)(a) and (b) need not be met by counterweights manufactured prior to December 31, 1969; provided, that these counterweights were manufactured under a specific license issued by the Atomic Energy Commission and were impressed with the legend, "UNAUTHORIZED ALTERATIONS PROHIBITED";

6. Natural or depleted uranium metal used as shielding and constituting part of any shipping container; provided that:

a. The shipping container is conspicuously and legibly impressed with the legend "CAUTION - RADIOACTIVE SHIELDING - URANIUM," and

b. The uranium metal is encased in mild steel or equally fire resistant metal with minimum wall thickness of 1/8 inch (3.2 mm);

7. Thorium or uranium contained in or on finished optical lenses or mirrors, provided that each lens or mirror does not contain more than 10 percent by weight thorium or uranium or, for lenses manufactured before August 27, 2013, 30 percent by weight of thorium; and that the exemption contained in this Section does not authorize either:

a. The shaping, grinding, or polishing of such lens or mirror or manufacturing processes other than the assembly of such lens or mirror into optical systems and devices without any alteration of the lens or mirror; or

b. The receipt, possession, use, or transfer of uranium or thorium contained in contact lenses, spectacles, or the eyepieces of binoculars or other optical instruments;

8. Uranium contained in detector heads of fire detection units, provided that each detector head contains not more than 5 nanocuries (185 Bq) of uranium; or

9. Thorium contained in any finished aircraft engine part containing nickel-thoria alloy, provided that:

a. The thorium is dispersed in the nickel-thoria alloy in the form of finely divided thoria (thorium dioxide), and

b. The thorium content in the nickel-thoria alloy does not exceed 4 percent by weight.

D. No person may initially transfer for sale or distribution a product containing source material to persons exempt under subsection (C), or equivalent regulations of the NRC or another Agreement State, unless authorized by a license issued under R9-7-318 to initially transfer such products for sale or distribution.

E. Persons authorized to manufacture, process, or produce these materials or products containing source material by another Agreement State, and persons who import finished products or parts, for sale or distribution must be authorized by a license issued under R9-7-318 for distribution only and are exempt from the requirements of Articles 4 and 10 of this Chapter, and R9-7-309(1) and (2).

F. The exemptions in subsections (C), (D), and (E) do not authorize the manufacture of any of the products described.

Ariz. Admin. Code § R9-7-302

New Section R9-7-302 recodified from R12-1-302, at A.A.R. 813, effective March 22, 2018 (Supp. 18-1). Amended by final expedited rulemaking at 24 A.A.R. 2151, effective July 12, 2018 (Supp. 18-3). Amended by final expedited rulemaking at 26 A.A.R. 1067, effective 5/6/2020. Amended by final expedited rulemaking at 30 A.A.R. 2681, effective 8/7/2024.