Ariz. Admin. Code § 9-7-1444

Current through Register Vol. 30, No. 40, October 4, 2024

Section R9-7-1444 - Laser Classification Measurements

A. A registrant shall measure accessible emission for classification:

1. Under the operational conditions and procedures that maximize accessible emission levels, including start-up, stabilized operation, and shutdown of the laser or laser facility;

2. With all controls and adjustments listed in the operating and service instructions adjusted for the maximum accessible emission level of laser radiation that is not expected to be detrimental to the functional integrity of the laser or enclosure;

3. At points in space to which human access is possible for a given laser configuration. If operations include the defeat of safety interlocks or removal of portions of the protective housing or enclosure, the registrant shall measure accessible emission at points accessible in that configuration;

4. With the measuring instrument detector positioned so that the maximum possible radiation is measured by the instrument; and

5. With the laser coupled to the type of laser energy source specified as compatible by the laser manufacturer and producing the maximum emission of accessible laser radiation.

B. A registrant shall perform measurements of accessible emission levels, used to classify laser and collateral radiation in accordance with 21 CFR 1040.10, April 1, 2004, which is incorporated by reference, published by the Office of Federal Register National Archives and Records Administration, Washington, D.C. 20408, and on file with the Department. This incorporation by reference contains no future editions or amendments.

Ariz. Admin. Code § R9-7-1444

New Section R9-7-1444 recodified from R12-1-1444 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).