Ariz. Admin. Code § 9-14-612

Current through Register Vol. 30, No. 45, November 8, 2024

Section R9-14-612 - Compliance Testing for Wastewater Parameters

A licensee for a laboratory at which compliance testing for wastewater parameters is performed shall ensure that:

1. The laboratory is operated in compliance with the guidelines in Key References C5 and C6; and

2. Each sample for Arizona wastewater parameter compliance testing is analyzed:

a. Using an approved method:

i. Listed in Table 6.2.B ; or

ii. Approved by the Department for wastewater parameter compliance testing under R9-14-610(E); and

b. If the approved method is from Key Reference C, following the quality control guidelines in Key Reference C associated with the approved method.

Ariz. Admin. Code § R9-14-612

Adopted effective December 20, 1991 (Supp. 91-4). Former Section R9-14-612 renumbered to R9-14-613; new Section R9-14-612 renumbered from R9-14-611 and amended effective June 20, 1997 (Supp. 97-2). Former Section R9-14-612 renumbered to R9-14-614; new Section R9-14-612 renumbered from R9-14-610and amended by final rulemaking at 7 A.A.R. 184, effective December 15, 2000 (Supp. 00-4). Amended by final rulemaking at 12 A.A.R. 4798, effective December 5, 2006 (Supp. 06-4). Amended by final rulemaking at 22 A.A.R. 2683, effective 10/1/2016.