Ariz. Admin. Code § 3-3-206

Current through Register Vol. 30, No. 45, November 8, 2024

Section R3-3-206 - Custom Application Equipment Tag; Fee

In addition to the provisions found under R3-3-200, the following apply to this Section.

A. A custom applicator shall not use custom application equipment unless the equipment has a valid tag. The custom applicator licensee shall place and maintain a valid tag so that it is prominently displayed on the pesticide application equipment.

B. A person applying for a tag shall provide the following information on a form obtained from the Department:

1. Name and signature of the applicant;

2. Date of the application;

3. Address, e-mail address, if applicable, and daytime telephone number of the applicant;

4. Name, physical address, mailing address, e-mail address, if applicable, and daytime telephone number of the business, if applicable;

5. Manufacturer, make, model and serial number, and if an aircraft or drone, the FAA registration number ("N" number for aircraft, or drone with an operating weight of over 55 lbs. total, including payload; or "FA" number for drone with an operating weight up to 55 lbs. total, including payload) of the application equipment; and

6. The name and contact information for a contact person at the business if different than the applicant,

C. The Department shall not issue or renew a tag and an existing tag is invalid if the custom applicator license is invalid.

D. An applicant shall submit the completed application to the Department, accompanied by a $25 fee for each piece of equipment, for each year or portion of the year during which the tag is valid.

E. A tag expires on December 31, and is valid for the same time period as the custom applicator license.

F. A custom applicator licensee shall not transfer a tag except as follows:

1. If equipment with a valid tag, is destroyed, rendered unusable, or transferred out of the state, the custom applicator licensee may transfer the tag to another piece of equipment.

2. If equipment with a valid tag, is leased, sold, or traded, the custom applicator licensee shall transfer the tag with the equipment to the lessee or new owner.

3. Before transferring a tag, the custom applicator licensee shall notify the Department that the equipment with the valid tag is being transferred and identify the person to whom the equipment with the valid tag is being transferred or identify the piece of equipment to which the tag is being transferred, or the tag is invalid.

Ariz. Admin. Code § R3-3-206

Adopted effective November 20, 1987 (Supp. 87-4). Renumbered from R3-10-206 (Supp. 91-4). Former Section R3-3-206 renumbered to R3-3-207; new R3-3-206 renumbered from R3-3-205and amended by final rulemaking at 10 A.A.R. 276, effective March 6, 2004 (Supp. 04-1). Amended by final rulemaking at 30 A.A.R. 89, effective 3/4/2024.