Ariz. Admin. Code § 3-2-1125
Current through Register Vol. 30, No. 50, December 13, 2024
Section R3-2-1125 - Specification GradingA. Applicants may request for additional specifications to be certified that exceed the standards of this chapter. The requested specifications must be submitted in writing to the administrator for approval. The approving official will review the information for approval or advise the applicant of the reason or reasons for disapproval. If the specification is approved, a letter enclosing a copy of the approved application and specification will be returned to the applicant with a request to provide copies of the specification to each supplier and applicable AZDA grader. Each page of the approved specification will have an approval stamp bearing the date of approval and the signature of the approving official. Additionally, each page will be sequentially numbered such as page 1 of 5, page 2 of 5, etc.B. Plant management is responsible for advising graders when they are preparing to pack eggs in accordance with an approved specification. However, each grader must be familiar with the approved specification list and, to the extent practically possible, be aware when products with approved specifications are being packed at the duty location. When a plant packs product requiring compliance with an approved specification, the grader shall obtain a copy of the specification from plant management and assure that all provisions of the specification are met. As applicable, product that meets specification requirements will be identified in accordance with procedures outlined in the approved specification. When the specification requires the issuance of a grading certificate, the following statement is to be placed in the remarks section of the certificate: "Product covered by this certificate meets specification requirements for _______."Ariz. Admin. Code § R3-2-1125
Adopted by final exempt rulemaking at 26 A.A.R. 916, effective 4/9/2020.