Ariz. Admin. Code § 20-5-510

Current through Register Vol. 30, No. 49, December 6, 2024

Section R20-5-510 - Safety Requirements for Material Hoists

A. Every owner or operator of a material hoist installed, repaired, or altered on or after January 1, 2023, shall comply with ANSI A10.5-2020 (Safety Requirements for Material Hoists), which is incorporated by reference. For purposes of a repair or alteration, compliance with the specified standard shall apply, to the extent possible, to the scope of the repair or alteration. This incorporation by reference does not include any later amendments or editions of the incorporated matter.

B. Every owner or operator of a material hoist installed, repaired, or altered prior to January 1, 2023, shall comply with either:

(1) ANSI A10.5-2020 (Safety Requirements for Material Hoists); or

(2) ANSI A10.5-2006 (Safety Requirements for Material Hoists), which are incorporated by reference. For purposes of a repair or alteration, compliance with the specified standard shall apply, to the extent possible, to the scope of the repair or alteration. These incorporations by reference do not include any later amendments or editions of the incorporated matter.

C. A copy of The referenced material is available for review at the Industrial Commission of Arizona, 800 West Washington Street, Phoenix, Arizona 85007, and ANSI at 25 West 43rd Street, 4th Floor, New York, New York, 10036 or at http://www.ansi.org.

Ariz. Admin. Code § R20-5-510

Adopted effective November 9, 1979 (Supp. 79-6). Amended effective June 23, 1983 (Supp. 83-3). R20-5-510recodified from R4-13-510 (Supp. 95-1). Amended by final rulemaking at 9 A.A.R. 381, effective March 15, 2003 (Supp. 03-1). Amended by final rulemaking at 15 A.A.R. 872, effective May 5, 2009 (Supp. 09-2). Amended by final rulemaking at 29 A.A.R. 512, effective 1/9/2023.