5 Alaska Admin. Code § 06.335

Current through May 31, 2024
Section 5 AAC 06.335 - Minimum distance between units of gear
(a) In the Naknek-Kvichak, Egegik, Ugashik, and Togiak Districts, no part of a set gillnet may be set or operated within 300 feet of any part of another set gillnet. In the Nushagak District, no part of a set gillnet may be set or operated within 450 feet of any part of another set gillnet. The provisions of this subsection do not prohibit a CFEC permi1 holder from operating a set gillnet seaward of another set gillnet operated under the authority of the same CFEC permit.
(b) No part of a drift gillnet may be operated within 300 feet of the side of a set gillnet and within 100 feet of the offshore end of a set gillnet. The 100-foot restriction does not apply seaward of the offshore setnet distance restrictions set out in 5 AAC 06.331(m) and (n).
(c) In the Nushagak District, no part of a drift gillnet may be operated within 100 feet of the inshore end of a set gillnet, except that in the locations described in 5 AAC 06.331(n), no part of a drift gillnet may be operated inshore of a set gillnet.

5 AAC 06.335

In effect before 1985; am 5/11/85, Register 94; am 4/2/88, Register 105; am 4/4/2013, Register 206; am 4/16/2016, Register 218, July 2016

Authority:AS 16.05.251