Section 17 AAC 90.740 - Certificate of conformance(a) The director shall accept a certificate of conformance issued by the NIST or the National Conference of Weights and Measures under the National Type Evaluation Program described in the NIST Handbook 130, 2018 Edition, dated November 2017, Uniform Laws and Regulations in the Areas of Legal Metrology and Engine Fuel Quality,adopted by reference, as proof of compliance with the specifications and tolerances for weighing and measuring devices as prescribed in the NIST Handbook 44, adopted by reference in AS 45.75.050(d) and 17 AAC 90.049.(b) The director will require a certificate of conformance as described in (a) of this section before a commercial or law enforcement weighing or measuring device can be introduced into use in the state.Eff. 1/18/2002, Register 161; am 12/31/2006, Register 180; am 9/20/2015, Register 215, October 2015; am 5/5/2018,Register 226, July 2018Copies of Handbook 130, adopted by reference in 17 AAC 90.740, and Handbook 44, and supplements are published yearly by the United States Department of Commerce, National Institute of Standards and Technology, and may be purchased from the Superintendent of Documents, United States Printing Office, Washington, D.C. 20402-9325. Copies are also available for inspection at the Anchorage office of the Department of Transportation and Public Facilities, Division of Measurement Standards and Commercial Vehicle Enforcement, 11900 Industry Way, Building M, Anchorage, Alaska 99515, and at the Lieutenant Governor's Office, Juneau, Alaska.
Authority:AS 45.75.040
AS 45.75.050
AS 45.75.070
AS 45.75.080