Current through Register Vol. 42, No. 12, September 30, 2024
Section 80-1-7-.10 - Requirements Of Applicants For Permits(1) Every manufacturer or distributor selling agricultural liming materials in this state shall, on or before October 1 of each year or prior to manufacture or distribution of such liming material in the State of Alabama, apply for and obtain an annual permit for such purpose on a form to be furnished by the commissioner. Such application shall be accompanied by a permit fee of $150.00 and shall show the brand name under which the liming material will be sold. If more than one type of agricultural liming material is manufactured or distributed or the product or the brand name is changed by a manufacturer or distributor, an additional permit fee of $100.00 for each additional brand or type of liming material must be paid. All permits shall expire on September 30 of the following year. When the manufacturer and the distributor are not the same, only one permit shall be required unless the brand name is changed, as it is hereby intended that the permit fee be paid only once on the same brand.(2) Applicants for an agricultural liming materials permit shall furnish with the application for the permit a complete and accurate copy of the label to be attached to the container of agricultural liming materials sold in this state, or if sold in bulk, a true copy of the labeling information which is required to be placed on the delivery slip and made available to the vendor in sufficient quantities to accompany each load of liming material sold.(3) Only one permit will be required unless the Brand name is changed.Ala. Admin. Code r. 80-1-7-.10
Filed April 19, 1982. Amended: Filed August 16, 2004; effective September 20, 2004. Amended: Filed August 10, 2011; effective September 14, 2011. Amended: Filed August 10, 2011; effective September 14, 2011.Authors: Charles H. Barnes, John P. Hagood, Robert J. Russell
Statutory Authority:Code of Ala. 1975, §§ 2-23-3, 2-23-9.