Ala. Admin. Code r. 770-X-10-.17-4-1-.07

Current through Register Vol. 42, No. 12, September 30, 2024

Section 770-X-10-.17-4-1-.07 - Combination Of Lighting Devices And Reflectors

(1) Permitted Combinations - Except as provided in paragraph (2) of this section, two or more lighting devices and reflectors, whether or not required by the rules in this part, may be combined optically if:

(a) Each required lighting device and reflector conforms to the applicable rules in this part; and

(b) Neither the mounting nor the use of a non-required lighting device or reflector impairs the effectiveness of a required lighting device or reflector or causes that device or reflector to be inconsistent with the applicable rules herein.

(2) Prohibited Combinations

(a) A turn signal lamp must not be combined optically with either a head lamp or other lighting device or combination of lighting devices that produces greater intensity of light than the turn signal lamp.

(b) A turn signal lamp must not be combined optically with a stop lamp unless the stop lamp function is always deactivated when the turn signal function is activated.

(c) A clearance lamp must not be combined optically with a tail lamp or identification lamp.

Ala. Admin. Code r. 770-X-10-.17-4-1-.07

Effective January 1978. Filed with LRS February 5, 2013. Filed for Codification in the Alabama Administrative Code by the Alabama Public Service Commission on February 5, 2013, pursuant to Code of Ala. 1975, § 41-22-7.

Author: Alabama Public Service Commission

Statutory Authority:Code of Ala. 1975, §§ 37-3-5, 37-3-7.