Ala. Admin. Code r. 420-3-1-.18

Current through Register Vol. 43, No. 1, October 31, 2024

Section 420-3-1-.18 - Tank Manufacturer Inspections

(1) An inspection shall be made upon initial application for a new tank series. At the discretion of the LHD, tanks greater than 1,500 gallons may not be required to be available for inspection at the manufacturing facility or at a staging area.

(2) The LHD or ADPH may perform periodic inspections for all tank series to determine compliance with these rules.

(a) When deemed necessary, the LHD or ADPH may make periodic inspections of larger tanks at a site specified by the LHD or ADPH.

Ala. Admin. Code r. 420-3-1-.18

Filed July 20, 1988. Amended: Filed June 19, 1992. Repealed and New Rule: Filed December 16, 1999; effective January 20, 2000. Repealed and New Rule: October 20, 2005; effective November 24, 2005; operative March 19, 2006.

Adopted by Alabama Administrative Monthly Volume XXXV, Issue No. 04, January 31, 2017, eff. 3/5/2017.

Adopted by Alabama Administrative Monthly Volume XLI, Issue No. 03, December 30, 2022, eff. 2/13/2023.

Previous Rule .30 was renumbered .18 per certification published December 30, 2022; effective February 13, 2023.

Authors: Thad Pittman, Pam Lockett

Statutory Authority:Code of Ala. 1975, §§ 22-2-2(4); 22-2-2(6); 22-10-1, et seq.; 22-26-1, et seq.