Ala. Admin. Code r. 330-X-11-.02

Current through Register Vol. 43, No. 02, November 27, 2024

Section 330-X-11-.02 - Seal Of The Licensee

(1) Upon approval of licensure by the Board, licensees will be advised that they should secure an official seal which shall be applied to all drawings, specifications, reports and other engineering or land surveying documents prepared by or under the direct control and personal supervision of the licensees.

(2) The seals to be used by the licensees are to be circular in form and from 1 5/8 to 2 inches in diameter with copy of the design to be furnished each new licensee.

(3) Seals obtained prior to the adoption of this rule and which are in conformance with prior Board rules are acceptable.

(4) Rubber stamps and computer generated seals identical in size, design and content with the approved seals may be used by the licensee.

(5) Drawings, reports, or documents that are signed using a digital signature, as defined in 330-X-.02(10), shall contain authentication procedures.

Ala. Admin. Code r. 330-X-11-.02

Filed September 22, 1982. Amended: Filed September 13, 1994; effective October 18, 1994. Amended: Filed September 23, 1998; effective October 28, 1998. Amended: Filed April 29, 2003; effective June 3, 2003. Amended: Filed June 22, 2012; effective July 27, 2012.

Author: Alabama State Board of Registration for Professional Engineers and Land Surveyors

Statutory Authority:Code of Ala. 1975, §§ 34-11-9, 34-11-35.