TUV Rheinland of North America, Inc.: Grant of Expansion of Recognition

Download PDF
Federal RegisterMay 19, 2021
86 Fed. Reg. 27116 (May. 19, 2021)

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces the final decision to expand the scope of recognition for TUV Rheinland of North America, Inc., as a Nationally Recognized Testing Laboratory (NRTL).

DATES:

The expansion of the scope of recognition becomes effective on May 19, 2021.

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone: (202) 693-1999; email: meilinger.francis2@dol.gov.

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone: (202) 693-2110; email: robinson.kevin@dol.gov. OSHA's web page includes information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html ).

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

OSHA hereby gives notice of the expansion of the scope of recognition of TUV Rheinland of North America, Inc. (TUVRNA), as a NRTL. TUVRNA's expansion covers the addition of nine test standards to the NRTL scope of recognition.

OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by the applicable test standard and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.

The agency processes applications by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides the preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including TUVRNA, which details the NRTL's scope of recognition. These pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.

TUVRNA submitted an application, dated June 19, 2019 (OSHA-2007-0042-0045), to expand recognition to include the addition of nine test standards. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

OSHA published the preliminary notice announcing TUVRNA's expansion applications in the Federal Register on March 15, 2021 (86 FR 14342). The agency requested comments by March 30, 2021, but it received no comments in response to this notice. OSHA now is proceeding with this final notice to grant expansion of TUVRNA's scope of recognition.

To obtain or review copies of all public documents pertaining to TUVRNA's application, go to www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA-2007-0042 contains all materials in the record concerning TUVRNA's recognition. Please note: Due to the COVID-19 pandemic, the Docket Office is closed to the public at this time but can be contacted at (202) 693-2350.

II. Final Decision and Order

OSHA staff examined TUVRNA's expansion application, their capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that TUVRNA meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed below. OSHA, therefore, is proceeding with this final notice to grant TUVRNA's scope of recognition. OSHA limits the expansion of TUVRNA's recognition to testing and certification of products for demonstration of conformance to the test standards listed in Table 1 below.

Table 1—List of Appropriate Test Standards for Inclusion in TUVRNA's NRTL Scope of Recognition

Test standard Test standard title
UL 62841-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 1: General Requirements.
UL 62841-2-2 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 2-2: Particular Requirements for Hand-Held Screwdrivers And Impact Wrenches.
UL 62841-2-4 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 2-4: Particular Requirements for Hand-Held Sanders And Polishers Other Than Disc Type.
UL 62841-2-5 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 2-5: Particular Requirements for Hand-Held Circular Saws.
UL 62841-2-9 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 2-9: Particular Requirements for Hand-Held Tappers and Threaders.
UL 62841-2-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 2-14: Particular Requirements for Hand-Held Planers.
UL 62841-3-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 3-1: Particular Requirements for Transportable Table Saws.
UL 62841-3-9 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 3-9: Particular Requirements for Transportable Mitre Saws.
UL 62841-3-10 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery—Safety—Part 3-10: Particular Requirements For Transportable Cut-Off Machines.

OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.

The American National Standards Institute (ANSI) may approve the test standard listed above as an American National Standard. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

A. Conditions

In addition to those conditions already required by 29 CFR 1910.7, TUVRNA must abide by the following conditions of the recognition:

1. TUVRNA must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);

2. TUVRNA must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and

3. TUVRNA must continue to meet the requirements for recognition, including all previously published conditions on TUVRNA's scope of recognition, in all areas for which it has recognition.

Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of TUVRNA, subject to the limitations and conditions specified above.

III. Authority and Signature

James S. Frederick, Acting Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, September 18, 2020) and 29 CFR 1910.7.

Signed at Washington, DC, on May 12, 2021.

James S. Frederick,

Acting Assistant Secretary of Labor for Occupational Safety and Health.

[FR Doc. 2021-10524 Filed 5-18-21; 8:45 am]

BILLING CODE 4510-26-P