The Export Administration Regulations; Editorial Revisions, Clarifications, and Corrections

AGENCY:

Bureau of Industry and Security, Commerce.

ACTION:

Final rule; corrections.

SUMMARY:

In this rule, the Bureau of Industry and Security (BIS) amends the Export Administration Regulations (EAR) by making targeted editorial corrections and clarifications. The errors addressed by this rule were inadvertent and these corrections will provide clarity and facilitate understanding of the regulations. This rule ensures that the language and policies already set forth in the EAR remain consistent throughout.

DATES:

This rule is effective October 5, 2021.

FOR FURTHER INFORMATION CONTACT:

Logan Norton, Regulatory Policy Division, Logan.Norton@bis.doc.gov, (202) 812-1762.

SUPPLEMENTARY INFORMATION:

Background

This final rule updates eleven parts of the Export Administration Regulations (EAR), parts 732, 734, 736, 738, 740, 744, 748, 750, 770, 772, and 774, such that most-recent language elsewhere in the EAR is consistent with the language in these parts. These changes are minor editorial revisions that either reflect Bureau of Industry and Security (BIS) policies that were previously published in the Federal Register and added to the EAR or reflect the modernization of procedures implemented by BIS. These revisions do not change the substance of the EAR.

Part 732 Steps for Using the EAR

In 2004, supplement no. 2 to part 732, the “Subject to the EAR?” flowchart, was revised to make it simpler and easier to read. However, the language of the supplement is not consistent with the language in other parts of the EAR, including language implemented before and after the 2004 amendment. In 1999, paragraphs (a) and (b) of § 734.5 were amended to better represent U.S. policy objectives but the 2004 update to supplement no. 2 did not capture these changes. Further, in 2009, paragraph (c) of § 734.5 was dropped from the EAR and in 2016, “transfer (in-country)” was added to the EAR in § 734.16. Elsewhere in this rule, § 734.3(a)(4) and (5) are being amended to align with § 736.2(b)(3) of the EAR; the changes to these sections also impact the flowchart in supplement no. 2 to part 732. This rule changes the “Subject to the EAR?” flowchart in supplement no. 2 of part 732 to reflect these changes. For example, the first text bubble of the supplement no longer mentions § 734.5(c) and the final text bubble simply refers readers to § 736.2(b)(3), rather than to any specific destinations.

Part 734 Scope of the Export Administration Regulations

Parts 734 and 736 were added to the EAR in 1996. Section 736.2 has been revised several times since then, updating the language regarding what constitutes a “foreign-produced direct product.” The most recent update to part 736 was in August of 2020. This rule amends § 734.3(a)(4) and (5) to reflect the terms currently used in § 736.2(b)(3) of the EAR. The definition for the term “direct product” is removed from § 734.3(a)(4), because it is being added to part 772, as detailed below.

Part 736

On January 15, 2021, BIS published an interim final rule (86 FR 4865) that inadvertently removed paragraphs (B) and (C) from § 736.2(b)(7)(i). Paragraphs (B) and (C) are added back by this rule. Those paragraphs dictate which schedules of chemicals listed in supplement no. 1 to part 745 a “U.S. person” may not export without complying with specific provisions and requirements of the EAR. In addition, as the January 15 interim final rule removed the definition of “U.S. person” from § 744.6(c) of the EAR (while leaving the identical definition in § 772.1 of the EAR), BIS is making conforming changes to § 736.2(b)(7)(i)(B) and (C). Specifically, BIS is revising both paragraphs to reference § 772.1, instead of § 744.6(c), for the definition of the term “U.S. person.” Quotation marks are also added around the term “U.S. person” in both paragraphs, given it is a defined term in part 772. Quotation marks are also added around the term “direct product” in § 736.2(b) for the same reason and as detailed below.

Part 738 Commerce Control List Overview and the Country Chart

In June of 2020, License Exception Civil End Users (CIV) was removed from the EAR. After the removal, a sample Commerce Control List entry set forth in § 738.4(b)(2) of the EAR unintentionally retained a reference to License Exception CIV. This rule rectifies this by removing the CIV reference from § 738.4(b)(2) while retaining the remainder of the sample entry.

Part 740 License Exceptions

On December 28, 2020, BIS published a final rule (85 FR 84211) adding Cyprus and Mexico to Country Group A:6. As there were issues with the amendatory instruction to that rule, this rule corrects the amendatory instruction and adds an “X” in Column “[A:6]” in Supplement No. 1 to Part 740 for “Cyprus” and “Mexico.”

Part 744 Control Policy: End-User and End-Use Based

In April of 2020, BIS published a rule regarding military end users (85 FR 23459). In supplement no. 2 to part 744 of the EAR, paragraph (3)(viii) inadvertently reprinted out-of-date text from Export Control Classification Number (ECCN) 3A992 when referring to ECCN 3E991 technology for those 3A992 items. This rule updates the paragraph to reflect the current text in that ECCN. This edit does not change the scope of the license requirement for items controlled under the ECCN. Quotation marks are also added around the term “direct product” in supplement no. 4 to part 744, because the term is being added to part 772 by this rule, as detailed below.

Part 748 Applications (Classification, Advisory, and License) and Documentation

As has been the case for some time, the public may submit advisory opinion requests to BIS in a variety of ways in addition to through the mail ( e.g., the U.S. Postal Service or via a shipping and logistics delivery service). This rule revises § 748.3(c) of the EAR to include how to submit advisory opinion requests via email or through the BIS website.

Supplement no. 2 to part 748, “Unique Application and Submission Requirements,” is being clarified to reflect BIS policy regarding the letters of assurance described in paragraph (o)(3)(i), which are applicable to license applications submitted for the export of technology controlled for national security reasons to certain countries. Specifically, this clarification reflects BIS policy that license applicants must always obtain letters of assurance, which must be submitted to BIS upon request. Quotation marks are also added around the term “direct product” in supplement no. 2, because the term is being added to part 772 by this rule, as detailed below. This rule also adds in that this applies to exports, reexports, and transfers (in-country), which is currently BIS policy regarding this paragraph.

This rule amends paragraph (b)(6) “Block 6: Ultimate Consignee,” of supplement no. 3 to part 748, “Statement by Ultimate Consignee and Purchaser Content Requirements.” Prior to publication of this rule, paragraph (b)(6) indicated that an ink signature is required on the BIS-711 “Statement by Ultimate Consignee and Purchaser” form. However, following public comments, in a March 2015 final rule, BIS confirmed that electronic signatures are permissible. This rule revises paragraph (b)(6) to more accurately reflect existing text found in § 748.11 of the EAR.

Part 750 Application Processing, Issuance and/or Denial

Sections 750.1, 750.8, and 750.9 are being updated to reflect BIS's use of the Simplified Network Application Process—Redesign (SNAP-R) system by eliminating or rewording parts of the sections that are no longer relevant given the online nature of the system. The SNAP-R system has been in place since October of 2006 and has largely replaced the previous system that involved the submission of paper license applications, but the EAR has not been fully updated to reflect that change. Now that BIS does not mail copies of licenses to applicants with SNAP-R accounts, and almost all exporters have access to licenses electronically (via the SNAP-R system) and can therefore save and print out multiple copies of their licenses themselves, a requirement to return a revoked license or a duplicate copy of a license is, under most circumstances, unnecessary. In § 750.8, the text specific to the return of a revoked license was relevant when BIS sent validated hard copies of licenses to exporters. This rule revises § 750.8 by removing the text requiring the return of revoked or suspended licenses. The remaining text specifies that if BIS revokes or suspends a license, the licensee must retain all applicable supporting documents and records of shipments in accordance with the recording keeping provisions of part 762 of the EAR. In § 750.9, the text specific to the return of duplicate licenses was relevant when BIS sent validated hard copies of licenses to exporters. This rule revises § 750.9 regarding lost, stolen or destroyed paper licenses by removing and reserving § 750.9(a)(3) of the EAR, which required the return of either the original or duplicate paper licenses should the original paper license be found. Doing so aligns the EAR with existing BIS policies and procedures. This rule also revises § 750.1 to reflect the changes this rule makes to §§ 750.8 and 750.9 of the EAR.

Section 750.7(a) is corrected by adding a sentence that directs readers to more detailed information regarding the release of “technology” authorized by the issuance of a BIS license, which is set forth within § 734.20 of the EAR. Section 750.7(a) is also broken up into subparagraphs (1), (2), and (3) to make it easier to read.

Part 770 Interpretations

“Release” as it is used in the context of the EAR is defined in § 734.15, which was added to the EAR in 2016. However, § 770.3(d)(1)(ii) was never updated to reflect the definition. This rule rectifies this omission by amending § 770.3(d)(1)(ii) to direct readers to the definition of a “release” in § 734.15 and by altering the language in paragraph (d)(1)(ii) such that it answers the preceding question in § 770.3(d)(1)(i) correctly given the 2016 change in the definition of “release.”

Part 772 Definitions of Terms

This final rule removes the definition of the term “direct product” from § 734.3(a)(4) and adds it to § 772.1. Given the changes to part 734 detailed above, the term “direct product” is better suited to appear as a defined term in part 772. This rule does not alter the definition of “direct product” or the BIS policy specific to the term.

BIS is also amending paragraph (a) of the definition of “U.S. person” in § 772.1 of the EAR to clarify that the definition applies for purposes of §§ 732.3(j), 736.2(b)(7), and 745.2(a)(1) of the EAR. This change does not alter BIS policy, but does bring the definition of “U.S. person” in line with the rest of the EAR.

Part 774 The Commerce Control List

This final rule corrects ECCN 0D617 to remove text that was inadvertently included from 0D606 and published as part of a revision of 0D617 on June 3, 2020 (85 FR 34306). In ECCN 0D617, this final rule removes references to 0x606 ECCNs and adds in its place text referencing the 0x617 ECCNs. This final rule also revises the Related Controls paragraph and Items paragraph (a) in the List of Items Controlled section of ECCN 0D617 to remove text that was inadvertently included from 0D606 and to add in its place the intended text from 0D617. The publication of this correction does not change existing BIS policy.

This final rule corrects a reference in the control chart for ECCN 7A611 from “§ 724.6(a)(7)” to “§ 742.6(a)(7)” in supplement no. 1 to part 774.

Export Control Reform Act of 2018

On August 13, 2018, the President signed into law the John S. McCain National Defense Authorization Act for Fiscal Year 2019, which included the Export Control Reform Act of 2018 (ECRA), 50 U.S.C. Sections 4801-4852. ECRA provides the legal basis for BIS's principal authorities and serves as the authority under which BIS issues this rule.

Rulemaking Requirements

1. Executive Orders 13563 and 12866 direct agencies to assess all costs and benefits of available regulatory alternatives and, if regulation is necessary, to select regulatory approaches that maximize net benefits (including potential economic, environmental, public health and safety effects, distribute impacts, and equity). Executive Order 13563 emphasizes the importance of quantifying both costs and benefits, of reducing costs, of harmonizing rules, and of promoting flexibility. This final rule has not been designated a “significant regulatory action,” under section 3(f) of Executive Order 12866.

2. Notwithstanding any other provision of law, no person may be required to respond to or be subject to a penalty for failure to comply with a collection of information, subject to the requirements of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq. ) (PRA), unless that collection of information displays a currently valid Office of Management and Budget (OMB) Control Number. This regulation involves a collection currently approved by OMB under control number 0694-0088, Simplified Network Application Processing System. This collection includes, among other things, license applications and commodity classification, and carries a burden estimate of 29.6 minutes for a manual or electronic submission for a total burden estimate of 31,835 hours. BIS does not expect the burden hours associated with this collection to change.

3. This rule does not contain policies with federalism implications as that term is defined under Executive Order 13132.

Administrative Procedure Act and Regulatory Flexibility Act Requirements

Pursuant to Section 4821 of ECRA, this action is exempt from the Administrative Procedure Act (5 U.S.C. 553) requirements for notice of proposed rulemaking, opportunity for public participation and delay in effective date.

Further, no other law requires that a notice of proposed rulemaking and an opportunity for public comment be given for this final rule. Because a notice of proposed rulemaking and an opportunity for public comment are not required to be given for this rule under the Administrative Procedure Act or by any other law, the analytical requirements of the Regulatory Flexibility Act (5 U.S.C. 601 et seq. ) are not applicable. Accordingly, no regulatory flexibility analysis is required, and none has been prepared.

List of Subjects

15 CFR Part 732

• Administrative practice and procedure
• Exports
• Reporting and recordkeeping requirements

15 CFR Part 734

• Administrative practice and procedure
• Exports
• Inventions and patents
• Research
• Science and technology

15 CFR Part 738

• Exports

15 CFR Part 744

• Exports
• Reporting and recordkeeping requirements
• Terrorism

15 CFR Parts 740, 748 and 750

• Administrative practice and procedure
• Exports
• Reporting and recordkeeping requirements

15 CFR Parts 736, 770, and 772

• Exports

15 CFR Part 774

• Exports
• Reporting and recordkeeping requirements
• Terrorism

Accordingly, parts 732, 734, 736, 738, 740, 744, 748, 750, 770, 772, and 774 of the Export Administration Regulations (15 CFR parts 730-774) are amended as follows:

PART 732—[AMENDED]

1. The authority citation for part 732 continues to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783.

2. Supplement no. 2 to part 732 is revised to read as follows:

Supplement No. 2 to Part 732—Subject to the EAR?

PART 734—[AMENDED]

3. The authority citation for part 734 continues to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; E.O. 12938, 59 FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 13020, 61 FR 54079, 3 CFR, 1996 Comp., p. 219; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13637, 78 FR 16129, 3 CFR, 2014 Comp., p. 223; Notice of November 12, 2020, 85 FR 72897 (November 13, 2020).

4. Section 734.3 is amended by revising paragraphs (a)(4) and (5), to read as follows:

PART 736—[AMENDED]

5. The authority citation for part 736 is revised to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; E.O. 12938, 59 FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 13020, 61 FR 54079, 3 CFR, 1996 Comp., p. 219; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13338, 69 FR 26751, 3 CFR, 2004 Comp., p. 168; Notice of November 12, 2020, 85 FR 72897 (November 13, 2020); Notice of May 6, 2021, 86 FR 26793 (May 10, 2021).

6. Section 736.2 is amended by:

a. Adding double quotation marks around the term “Direct Product” in paragraph (b) introductory text and the paragraph (b)(3) subject heading;

b. Adding double quotation marks around the term “direct product” wherever it appears in paragraph (b)(3);

c. Adding double quotation marks around the term “direct products” in paragraphs (b)(3)(ii)(B)( 2 ), (b)(3)(iv)(B)( 2 ), and (b)(3)(v); and

d. Adding paragraphs (b)(7)(i)(B) and (C).

The additions read as follows:

PART 738—[AMENDED]

7. The authority citation for part 738 is revised to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; 10 U.S.C. 8720; 10 U.S.C. 8730(e); 22 U.S.C. 287c; 22 U.S.C. 2151 note; 22 U.S.C. 3201 et seq.; 22 U.S.C. 6004; 42 U.S.C. 2139a; 15 U.S.C. 1824; 50 U.S.C. 4305; 22 U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783.

8. Section 738.4 is amended by revising paragraph (b)(2) to read as follows:

PART 740—LICENSE EXCEPTIONS

9. The authority citation for part 740 continues to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; 22 U.S.C. 7201 et seq.; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783.

10. Supplement No. 1 to part 740 is amended by revising the entries for “Cyprus” and “Mexico” in the Country Group A table to read as follows:

Supplement No. 1 to Part 740—Country Groups

PART 744—[AMENDED]

11. The authority citation for 15 CFR part 744 continues to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; 22 U.S.C. 3201 et seq.; 42 U.S.C. 2139a; 22 U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O. 12058, 43 FR 20947, 3 CFR, 1978 Comp., p. 179; E.O. 12851, 58 FR 33181, 3 CFR, 1993 Comp., p. 608; E.O. 12938, 59 FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13099, 63 FR 45167, 3 CFR, 1998 Comp., p. 208; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13224, 66 FR 49079, 3 CFR, 2001 Comp., p. 786; Notice of September 18, 2020, 85 FR 59641 (September 22, 2020); Notice of November 12, 2020, 85 FR 72897 (November 13, 2020).

12. Supplement no. 2 to part 744 is amended by revising paragraph (3)(viii) to read as follows:

Supplement No. 2 to Part 744—List of Items Subject to the Military End Use or End User License Requirement of § 744.21

(3) * * *

(viii) 3E991 Limited to “technology” according to the General Technology Note for the “development,” “production,” or “use” of digital oscilloscopes and transient recorders using analog-to-digital conversion techniques, capable of storing transients by sequentially sampling single-shot inputs at successive intervals of less than 1 ns (greater than 1 giga-sample per second), digitizing to 8 bits or greater resolution and storing 256 or more samples.

Supplement 4 to Part 744 [Amended]

13. Supplement no. 4 to part 744 is amended in footnote 1 by adding double quotation marks around the terms “direct product” and “Direct product” wherever they appear.

PART 748—[AMENDED]

14. The authority citation for part 748 is revised to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; Notice of August 6, 2021, 86 FR 43901 (August 10, 2021).

15. Section 748.3 is amended by revising the introductory text of paragraph (c) and the introductory text of paragraph (c)(1) to read as follows:

16. Supplement no. 2 to part 748 is amended by revising paragraph (o)(3)(i) to read as follows:

Supplement No. 2 to Part 748—Unique Application and Submission Requirements

(o) * * *

(3) * * *

(i) Technology controlled for national security reasons. If you are submitting a license application to export, reexport, and transfer (in-country) technology controlled for national security reasons to a country not listed in Country Group D:1, E:1, or E:2 (see Supplement No. 1 to part 740 of the EAR), you must obtain the letter from the ultimate consignee verifying that, unless prior authorization is obtained from BIS, the consignee will not knowingly reexport the technology to any destination, or export the “direct product” of the technology, directly or indirectly, to a country listed in Country Group D:1, E:1, or E:2 (see Supplement No. 2 to part 740 of the EAR). If you are unable to obtain this letter of assurance from your consignee, you must state in your license application why the assurances could not be obtained. BIS may request a copy of this letter. * * *

17. Supplement no. 3 to part 748 is amended by revising paragraph (b)(6) to read as follows:

Supplement No. 3 to Part 748—Statement by Ultimate Consignee and Purchaser Content Requirements

(b) * * *

(6) Block 6: Ultimate Consignee. Enter the requested information and sign the statement digitally or in ink. (For a definition of ultimate consignee, see § 748.5(e) of this part.)

PART 750—[AMENDED]

18. The authority citation for part 750 is revised to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; Sec. 1503, Pub. L. 108-11, 117 Stat. 559; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13637, 78 FR 16129, 3 CFR, 2013 Comp., p. 223; Presidential Determination 2003-23, 68 FR 26459, 3 CFR, 2004 Comp., p. 320.

19. Section 750.1 is revised to read as follows:

20. Section 750.7 is amended by revising paragraph (a) to read as follows:

21. Section 750.8 is amended by revising paragraph (b) to read as follows:

22. Section 750.9 is amended by revising paragraph (a) to read as follows:

PART 770—[AMENDED]

23. The authority citation for 15 CFR part 770 is revised to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783.

24. Section 770.3 is amended by revising paragraph (d)(1)(ii) to read as follows:

PART 772—[AMENDED]

25. The authority citation for part 772 continues to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783.

26. Section 772.1 is amended by:

a. Adding a definition for “direct product” in alphabetical order; and

b. Revising paragraph (a) introductory text of the definition of “U.S. person”.

The addition and revision read as follows:

PART 774—[AMENDED]

27. The authority citation for 15 CFR part 774 continues to read as follows:

Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50 U.S.C. 1701 et seq.; 10 U.S.C. 8720; 10 U.S.C. 8730(e); 22 U.S.C. 287c, 22 U.S.C. 3201 et seq.; 22 U.S.C. 6004; 42 U.S.C. 2139a; 15 U.S.C. 1824; 50 U.S.C. 4305; 22 U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 783.

28. Supplement No. 1 to Part 774 is amended by revising ECCN 0D617 and ECCN 7A611 to read as follows:

Supplement No. 1 to Part 774—The Commerce Control List

0D617 “Software” “specially designed” for the “development,” “production,” operation, or maintenance of commodities controlled by 0A617, “equipment” controlled by 0B617, or materials controlled by 0C617 (see List of Items Controlled).

License Requirements

Reason for Control: NS, RS, AT, UN

List Based License Exceptions (See Part 740 for a description of all license exceptions)

TSR: N/A

Special Conditions for STA

STA: Paragraph (c)(2) of License Exception STA (§ 740.20(c)(2) of the EAR) may not be used for any “software” in 0D617.

List of Items Controlled

Related Controls: (1) “Software” directly related to articles controlled by USML Category XIII is subject to the control of USML paragraph XIII(l). (2) See ECCN 0A919 for foreign-made “military commodities” that incorporate more than a de minimis amount of U.S.-origin “600 series” controlled content.

Related Definitions: N/A

Items:

a. “Software” (other than “software” controlled in paragraph .y of this entry) “specially designed” for the “development,” “production,” operation or maintenance of commodities controlled by ECCNs 0A617 (except 0A617.y), 0B617, or 0C617.

b. to x. [Reserved].

y. Specific “software” “specially designed” for the “production,” “development,” operation or maintenance of commodities controlled by ECCN 0A617.y.

7A611 Military fire control, laser, imaging, and guidance equipment, as follows (see List of Items Controlled).

License Requirements

Reason for Control: NS, MT, RS, AT, UN

List Based License Exceptions (See Part 740 for a description of all license exceptions)

LVS: $1500

GBS: N/A

Special Conditions for STA

STA: Paragraph (c)(2) of License Exception STA (§ 740.20(c)(2) of the EAR) may not be used for any item in 7A611.

List of Items Controlled

Related Controls: (1) Military fire control, laser, imaging, and guidance equipment that are enumerated in USML Category XII, and technical data (including software) directly related thereto, are subject to the ITAR. (2) See Related Controls in ECCNs 0A504, 2A984, 6A002, 6A003, 6A004, 6A005, 6A007, 6A008, 6A107, 7A001, 7A002, 7A003, 7A005, 7A101, 7A102, and 7A103. (3) See ECCN 3A611 and USML Category XI for controls on countermeasure equipment. (4) See ECCN 0A919 for foreign-made “military commodities” that incorporate more than a de minimis amount of U.S. origin “600 series” controlled content.

Related Definitions: N/A

Items:

a. Guidance or navigation systems, not elsewhere specified on the USML, that are “specially designed” for a defense article on the USML or for a 600 series item.

b. to w. [Reserved]

x. “Parts,” “components,” “accessories,” and “attachments,” including accelerometers, gyros, angular rate sensors, gravity meters (gravimeters), and inertial measurement units (IMUs), that are “specially designed” for defense articles controlled by USML Category XII or items controlled by 7A611, and that are NOT:

x.1. Enumerated or controlled in the USML or elsewhere within ECCN 7A611;

x.2. Described in ECCNs 6A007, 6A107, 7A001, 7A002, 7A003, 7A101, 7A102 or 7A103; or

x.3. Elsewhere specified in ECCN 7A611.y or 3A611.y.

y. Specific “parts,” “components,” “accessories,” and “attachments” “specially designed” for a commodity subject to control in this ECCN or a defense article in Category XII and not elsewhere specified on the USML or in the CCL, as follows, and “parts,” “components,” “accessories,” and “attachments” “specially designed” therefor:

y.1 [Reserved]