Stainless Steel Sheet and Strip in Coils from Japan: Final Results of Antidumping Duty Administrative Review

Download PDF
Federal RegisterFeb 10, 2010
75 Fed. Reg. 6631 (Feb. 10, 2010)

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On August 7, 2009, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on stainless steel sheet and strip in coils (SSSSC) from Japan. This review covers two producers/exporters of the subject merchandise to the United States. The period of review (POR) is July 1, 2007, through June 30, 2008.

Based on our analysis of the comments received, we have made certain changes to the margin calculations for Hitachi Cable Ltd. (Hitachi Cable) and Nippon Kinzoku Co., Ltd. (NKKN), producers/exporters selected for individual review. Therefore, the final results for Hitachi Cable and NKKN differ from the preliminary results. The final weighted-average dumping margins for the reviewed firms are listed below in the section entitled “Final Results of Review.”

FOR FURTHER INFORMATION CONTACT:

Kate Johnson or Rebecca Trainor, AD/CVD Operations, Office 2, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-4929 or (202) 482-4007, respectively.

SUPPLEMENTARY INFORMATION:

Background

This review covers two producers/exporters: Hitachi Cable and NKKN.

On August 7, 2009, the Department published in the Federal Register the preliminary results of the 2007-2008 administrative review of the antidumping duty order on SSSSC from Japan. See Stainless Steel Sheet and Strip in Coils from Japan: Preliminary Results of Antidumping Duty Administrative Review, 74 FR 39615 (August 7, 2009) (Preliminary Results). We invited parties to comment on those preliminary results.

Since the Preliminary Results, we conducted the cost verification of Hitachi Cable from September 28 through October 2, 2009.

On October 28, 2009, we extended the deadline for the final results until no later than February 3, 2010. See Stainless Steel Sheet and Strip in Coils from Japan: Notice of Extension of Time Limit for the Final Results of the 2007-2008 Administrative Review, 74 FR 55539 (October 28, 2009).

On November 18, 2009, we received case briefs from the domestic producers of the subject merchandise (i.e., AK Steel Corporation and Allegheny Technologies, Inc.) and NKKN. A rebuttal brief was received from Hitachi on November 25, 2009.

The Department has conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act).

Scope of the Order

For purposes of this order, the products covered are certain SSSSC. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 mm in width and less than 4.75 mm in thickness, and that is annealed or otherwise heat treated and pickled or otherwise descaled. The subject sheet and strip may also be further processed (e.g., cold-rolled, polished, aluminized, coated, etc.) provided that it maintains the specific dimensions of sheet and strip following such processing.

The merchandise subject to this order is currently classifiable in the Harmonized Tariff Schedule of the United States (HTS) at subheadings: 7219.13.00.31, 7219.13.00.51, 7219.13.00.71, 7219.13.00.81, 7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 7219.32.00.05, 7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 7219.32.00.36, 7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 7219.33.00.05, 7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 7219.33.00.36, 7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 7219.34.00.05, 7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 7219.34.00.35, 7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 7219.35.00.35, 7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 7219.90.00.60, 7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 7220.20.10.10, 7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 7220.20.60.05, 7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 7220.20.60.80, 7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 7220.20.70.60, 7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 7220.20.90.60, 7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 7220.90.00.80. Although the HTS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise under review is dispositive.

Excluded from the scope of this order are the following: (1) sheet and strip that is not annealed or otherwise heat treated and pickled or otherwise descaled, (2) sheet and strip that is cut to length, (3) plate (i.e., flat-rolled stainless steel products of a thickness of 4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a prepared edge, rectangular in shape, of a width of not more than 9.5 mm), and (5) razor blade steel. Razor blade steel is a flat-rolled product of stainless steel, not further worked than cold-rolled (cold-reduced), in coils, of a width of not more than 23 mm and a thickness of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent chromium, and certified at the time of entry to be used in the manufacture of razor blades. See Chapter 72 of the HTS, “Additional U.S. Note”' 1(d).

Flapper valve steel is also excluded from the scope of the order. This product is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors.

Also excluded is a product referred to as suspension foil, a specialty steel product used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of plus-or-minus 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 mm, and with a mass of 225 kg or less. Roll marks may only be visible on one side, with no scratches of measurable depth. The material must exhibit residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm over 685 mm length.

Certain stainless steel foil for automotive catalytic converters is also excluded from the scope of this order. This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than 1.0 percent, manganese of no more than 1.0 percent, chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002 or greater than 0.05 percent, and total rare earth elements of more than 0.06 percent, with the balance iron.

Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope of this order. This ductile stainless steel strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 percent cobalt, with the remainder of iron, in widths 228.6 mm or less, and a thickness between 0.127 and 1.270 mm. It exhibits magnetic remanence between 9,000 and 12,000 gauss, and a coercivity of between 50 and 300 oersteds. This product is most commonly used in electronic sensors and is currently available under proprietary trade names such as “Arnokrome III.”1

Certain electrical resistance alloy steel is also excluded from the scope of this order. This product is defined as a non-magnetic stainless steel manufactured to American Society of Testing and Materials (ASTM) specification B344 and containing, by weight, 36 percent nickel, 18 percent chromium, and 46 percent iron, and is most notable for its resistance to high temperature corrosion. It has a melting point of 1390 degrees Celsius and displays a creep rupture limit of 4 kilograms per square millimeter at 1000 degrees Celsius. This steel is most commonly used in the production of heating ribbons for circuit breakers and industrial furnaces, and in rheostats for railway locomotives. The product is currently available under proprietary trade names such as “Gilphy 36.”2

Certain martensitic precipitation-hardenable stainless steel is also excluded from the scope of this order. This high-strength, ductile stainless steel product is designated under the Unified Numbering System (UNS) as S45500-grade steel, and contains, by weight, 11 to 13 percent chromium, and 7 to 10 percent nickel. Carbon, manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has copper, niobium, and titanium added to achieve aging, and will exhibit yield strengths as high as 1700 Mpa and ultimate tensile strengths as high as 1750 Mpa after aging, with elongation percentages of 3 percent or less in 50 mm. It is generally provided in thicknesses between 0.635 and 0.787 mm, and in widths of 25.4 mm. This product is most commonly used in the manufacture of television tubes and is currently available under proprietary trade names such as “Durphynox 17.”3

Finally, three specialty stainless steels typically used in certain industrial blades and surgical and medical instruments are also excluded from the scope of this order. These include stainless steel strip in coils used in the production of textile cutting tools (e.g., carpet knives).4 This steel is similar to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less, and includes between 0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. This steel is sold under proprietary names such as “GIN4 Mo.” The second excluded stainless steel strip in coils is similar to AISI 420-J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of no more than 0.025 percent and sulfur of no more than 0.020 percent. This steel has a carbide density on average of 100 carbide particles per 100 square microns. An example of this product is “GIN5” steel. The third specialty steel has a chemical composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 percent, phosphorus of no more than 0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This product is supplied with a hardness of more than Hv 500 guaranteed after customer processing, and is supplied as, for example, “GIN6.”5

Period of Review

The POR is July 1, 2007, through June 30, 2008.

Cost of Production

As discussed in the Preliminary Results, we conducted sales-below-cost investigations to determine whether Hitachi and NKKN made home market sales of the foreign like product during the POR at prices below their costs of production (COP) within the meaning of section 773(b)(1) of the Act. See Preliminary Results, 74 FR at 39620. For both respondents, we performed the cost test for these final results following the same methodology as in the Preliminary Results.

We found 20 percent or more of each respondent's sales of a given product during the reporting period were at prices less than the weighted-average COP for this period. Thus, we determined that these below-cost sales were made in “substantial quantities” within an extended period of time and at prices which did not permit the recovery of all costs within a reasonable period of time in the normal course of trade. See sections 773(b)(2)(B) - (D) of the Act.

Therefore, for purposes of these final results, we find that Hitachi and NKKN made below-cost sales which were not in the ordinary course of trade. Consequently, we disregarded these sales for each respondent and used the remaining sales as the basis for determining normal value pursuant to section 773(b)(1) of the Act.

Analysis of Comments Received

All issues raised in the case briefs by parties to this administrative review, and to which we have responded, are listed in the Appendix to this notice and addressed in the Issues and Decision Memorandum (the Decision Memo), which is adopted by this notice. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendations in this public memorandum, which is on file in the Central Records Unit, HCHB Room 1117, of the main Department building.

In addition, a complete version of the Decision Memo can be accessed directly on the Web at http://ia.ita.doc.gov/frn/. The paper copy and electronic version of the Decision Memo are identical in content.

Changes Since the Preliminary Results

Based on our analysis of the comments received, we have made certain changes in the margin calculations for Hitachi and NKKN. These changes are discussed in the relevant sections of the Decision Memo.

Final Results of Review

We determine that weighted-average dumping margins exist for the respondents for the period July 1, 2007, through June 30, 2008, as follows:

Manufacturer/Exporter Percent Margin
Hitachi Cable Ltd. 0.00
Nippon Kinzoku Company, Ltd. 0.54

Assessment

The Department shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries.

In those instances where Hitachi and NKKN reported the entered value of their U.S. sales, we have calculated importer-specific ad valorem duty assessment rates based on the ratio of the total amount of antidumping duties calculated for the examined sales to the total entered value of the examined sales for that importer. In those instances where NKKN did not report the entered value of its U.S. sales, we have calculated importer-specific per-unit duty assessment rates by aggregating the total amount of antidumping duties calculated for the examined sales and dividing this amount by the total quantity of those sales. To determine whether the duty assessment rates are de minimis, in accordance with the requirement set forth in 19 CFR 351.106(c)(2), we have calculated importer-specific ad valorem ratios based on the estimated entered value.

We will instruct CBP to assess antidumping duties on all appropriate entries covered by this review if any importer-specific assessment rate calculated in the final results of this review is above de minimis (i.e., at or above 0.50 percent). Pursuant to 19 CFR 351.106(c)(2), we will instruct CBP to liquidate without regard to antidumping duties any entries for which the assessment rate is de minimis (i.e., less than 0.50 percent). The Department intends to issue assessment instructions to CBP 15 days after the date of publication of these final results of review.

The Department clarified its “automatic assessment” regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment Policy Notice). This clarification will apply to entries of subject merchandise during the POR produced by companies included in these final results of review for which the reviewed companies did not know that the merchandise they sold to the intermediary (e.g., a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all-others rate established in the less-than-fair-value (LTFV) investigation if there is no rate for the intermediary involved in the transaction. See Assessment Policy Notice for a full discussion of this clarification.

Cash Deposit Requirements

The following cash deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: 1) the cash deposit rates for each specific company listed above will be the rates shown above, except if the rate is less than 0.50 percent, and therefore, de minimis within the meaning of 19 CFR 351.106(c)(1), in which case the cash deposit rate will be zero; 2) for previously reviewed or investigated companies not participating in this review, the cash deposit rate will continue to be the company-specific rate published for the most recent period; 3) if the exporter is not a firm covered in this review, a prior review, or the original LTFV investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and 4) the cash deposit rate for all other manufacturers or exporters will be 40.18 percent, the all-others rate established in the LTFV investigation. These requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a final reminder to importers of their responsibility, under 19 CFR 351.402(f)(2), to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification to Interested Parties

This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

We are issuing and publishing these final results of review in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

Dated: February 3, 2010.

Ronald K. Lorentzen,

Deputy Assistant Secretary for Import Administration.

Appendix Issues in Decision Memo

Hitachi

Comment 1: Bona Fides of Hitachi Cable's U.S. Sale

NKKN

Comment 2: Sample Sales in the U.S. Database

Comment 3: SAS Programming Errors

[FR Doc. 2010-2985 Filed 2-9-10; 8:45 am]

BILLING CODE 3510-DS-S