Petition for Waiver of Compliance

Download PDF
Federal RegisterMar 31, 2004
69 Fed. Reg. 17026 (Mar. 31, 2004)

In accordance with part 211 of title 49 Code of Federal Regulations (CFR), notice is hereby given that the Federal Railroad Administration (FRA) received a request for a waiver of compliance with certain requirements of its safety standards. The individual petition is described below, including the party seeking relief, the regulatory provisions involved, the nature of the relief being requested, and the petitioner's arguments in favor of relief.

Dubois County Railroad (DCR)

The Dubois County Railroad has petitioned for a permanent waiver of compliance for one (1) locomotive, specifically DCRR 78, from the requirements of Safety Glazing Standards, 49 CFR 223.11. Section 223.11 states, (a) Locomotives, other than yard locomotives, built or rebuilt prior to July 1, 1980, which are equipped in the forward and rearward end facing glazing locations of the locomotive cab windshield with a glazing material that meets the criteria for either portion of the impact testing required for a Type I test under the provisions of appendix A of this part, will not require the installation of certified glazing in the windshield location except to replace windshield glazing material that is broken or damaged. (b) Locomotives, other than yard locomotives built or rebuilt prior to July 1, 1980 which are equipped in all locomotive cab side facing glazing locations with a glazing material that meets the criteria for either portion of the impact testing required for a Type II test under the provisions of appendix A of this part, will not require the installation of certified glazing in the side facing glazing location except to replace side facing glazing material that is broken or damaged.

The locomotive, an ALCO S-2 1,000 HP switcher manufactured in 1950, presently has safety glass in good condition, but operating without FRA approved safety glazing.

The DCR operates over 16 miles of railroad in a rural area between Huntingburg, IN and Dubois, IN, under yard limit rules for the entire 16 miles of the operation. Maximum operating speed is 10 miles per hour. The DCRR has experienced no problems with vandalism. Presently, the DCRR maintains an FRA waiver for safety glazing on locomotive DCRR 101.

Interested parties are invited to participate in these proceedings by submitting written views, data, or comments. FRA does not anticipate scheduling a public hearing in connection with these proceedings since the facts do not appear to warrant a hearing. If any interested party desires an opportunity for oral comment, they should notify FRA, in writing, before the end of the comment period and specify the basis for their request.

All communications concerning these proceedings should identify the appropriate docket number (e.g., Waiver Petition Docket Number 2004-16890) and must be submitted to the Docket Clerk, DOT Docket Management Facility, Room PL-401 (Plaza Level), 7th Street, SW., Washington, DC 20590. Communications received within 45 days of the date of this notice will be considered by FRA before final action is taken. Comments received after that date will be considered as far as practicable. All written communications concerning these proceedings are available for examination during regular business hours (9 a.m.-5 p.m.) at the above facility. All documents in the public docket are also available for inspection and copying on the Internet at the docket facility's Web site at http://dms.dot.gov.

Anyone is able to search the electronic form of all comments received into any of our dockets by the name of the individual submitting the comment (or signing the comment, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's complete Privacy Act Statement in the Federal Register published on April 11, 2000 (Volume 65, Number 70; Pages 19477-78). The Statement may also be found at http://dms.dot.gov.

Issued in Washington, DC, on March 25, 2004.

Grady C. Cothen, Jr.,

Deputy Associate Administrator for Safety Standards and Program Development.

[FR Doc. 04-7119 Filed 3-30-04; 8:45 am]

BILLING CODE 4910-06-M