National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins

Download PDF
Federal RegisterAug 29, 2000
65 Fed. Reg. 52392 (Aug. 29, 2000)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Proposed rule.

SUMMARY:

The EPA is proposing to indefinitely stay the compliance date for the process contact cooling tower (PCCT) provisions for existing affected sources producing poly(ethylene terephthalate) (PET) using the continuous terephthalic acid (TPA) high viscosity multiple end finisher process. We are proposing this stay of the compliance date because the EPA is in the process of responding to a request to reconsider relevant portions of the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Group IV Polymers and Resins which may result in changes to the emission limitation which applys to PCCT in this subcategory.

In the “Rules and Regulations” section of this Federal Register, we are finalizing this stay without prior proposal because we view this as a noncontroversial action and anticipate no adverse comment. We have explained our reasons for this action in the preamble to the direct final rule. If we receive an adverse comment on this action, we will withdraw the direct final rule and it will not take effect. We will address all public comments in a subsequent final rule based on this proposed rule. We will not institute a second comment period on this action. Any parties interested in commenting must do so at this time.

DATES:

Comments: Written comments must be received by September 28, 2000, unless a hearing is requested by September 8, 2000. If a hearing is requested, written comments must be received by October 13, 2000.

Public Hearing. Anyone requesting a public hearing must contact the EPA by September 8, 2000. If requested, a public hearing will be held in Research Triangle Park, North Carolina at 10:30 a.m. on September 12, 2000.

ADDRESSES:

Comments. Comments should be submitted (in duplicate, if possible) to: Air and Radiation Docket and Information Center (6102), Attention Docket Number A-92-45 (Group IV Polymers and Resins), Room M-1500, U.S. Environmental Protection Agency, 1200 Pennsylvania Avenue, NW, Washington, D.C. 20460. The EPA requests that a separate copy also be sent to the contact person listed below (see FOR FURTHER INFORMATION CONTACT).

Public Hearing. If a public hearing is held, it will be held at the EPA's Office of Administration Auditorium, Research Triangle Park, North Carolina.

Docket. Docket number A-92-45, containing information relevant to this proposed rulemaking, is available for public inspection between 8:00 a.m. and 5:30 p.m., Monday through Friday (except for Federal holidays) at the following address: U.S. Environmental Protection Agency, Air and Radiation Docket and Information Center (MC-6102), 401 M Street, SW, Washington, DC 20460, telephone: (202) 260-7548. The docket is located at the above address in Room M-1500, Waterside Mall (ground floor). A reasonable fee may be charged for copying.

FOR FURTHER INFORMATION CONTACT:

Mr. Robert E. Rosensteel, Organic Chemicals Group, Emission Standards Division (MD-13), Office of Air Quality Planning and Standards, U.S. EPA, Research Triangle Park, North Carolina 27711, telephone number (919) 541-5608, electronic mail address rosensteel.bob@epa.gov.

SUPPLEMENTARY INFORMATION:

Comments. Comments and data may be submitted by electronic mail (e-mail) to: a-and-r-docket@epa.gov. Electronic comments must be submitted as an ASCII file to avoid the use of special characters and encryption problems and will also be accepted on disks in WordPerfect® version 5.1, 6.1 or Corel 8 file format. All comments and data submitted in electronic form must note the docket number A-92-45. No confidential business information (CBI) should be submitted by e-mail. Electronic comments may be filed online at many Federal Depository Libraries.

Commenters wishing to submit proprietary information for consideration must clearly distinguish such information from other comments and clearly label it as CBI. Send submissions containing such proprietary information directly to the following address, and not to the public docket, to ensure that proprietary information is not inadvertently placed in the docket: Attention: Mr. Bob Rosensteel, U.S. EPA, c/o OAQPS Document Control Officer, 411 W. Chapel Hill Street, Room 944, Durham NC 27711. The EPA will disclose information identified as CBI only to the extent allowed by the procedures set forth in 40 CFR part 2. If no claim of confidentiality accompanies a submission when it is received by the EPA, the information may be made available to the public without further notice to the commenter.

Public Hearing. Persons interested in presenting oral testimony or inquiring as to whether a hearing is to be held should contact Ms. Maria Noell, U.S. Environmental Protection Agency, MD-13, Research Triangle Park, NC 27711, telephone (919) 541-5607, at least 2 days in advance of the public hearing. Persons interested in attending the public hearing must also call Ms. Maria Noell to verify the time, date, and location of the hearing. The public hearing will provide interested parties the opportunity to present data, views, or arguments concerning this proposed rule.

Docket. The docket is an organized and complete file of all the information considered by the EPA in the development of this rulemaking. The docket is a dynamic file because material is added throughout the rulemaking process. The docketing system is intended to allow members of the public and industries involved to readily identify and locate documents so that they can effectively participate in the rulemaking process. Along with the proposed and promulgated standards and their preambles, the contents of the docket will serve as the record in the case of judicial review. (See section 307(d)(7)(A) of the Clean Air Act (CAA). An index for the docket, as well as individual items contained within the docket, may be obtained by calling (202) 260-7548 or (202) 260-7549. A reasonable fee may be charged for copying docket materials. The docket index is also available by facsimile, as described on the Office of Air and Radiation, Docket and Information Center Website at http://www.epa.gov/airprogm/oar/docket/faxlist.html.

World Wide Web. In addition to being available in the docket, an electronic copy of this proposed rule is also available through the World Wide Web (WWW). Following signature, a copy of the rule will be posted on the EPA's Technology Transfer Network (TTN) policy and guidance page for newly proposed or promulgated rules at http://www.epa.gov/ttn/oarpg. The TTN at EPA's web site provides information and technology exchange in various areas of air pollution control. If more information regarding the TTN is needed, call the TTN HELP line at (919) 541-5384.

Regulated Entities. The regulated category and entities affected by this action include:

Category SIC NAICS Examples of regulated entities
Industry 2821 325211 Facilities that produce PET using the continuous TPA high viscosity multiple end finisher process.

This table is not intended to be exhaustive but, rather, provides a guide for readers likely to be interested in this proposed rule. To determine whether your facility is affected by this action, you should carefully examine all of the applicability criteria in 40 CFR part 63, subpart JJJ and in the proposed amendments to subpart JJJ (64 FR 11560). If you have any questions regarding the applicability of this proposed rule to a particular entity, consult the person listed in the preceding FOR FURTHER INFORMATION CONTACT section.

This document concerns an indefinite stay, under the CAA section 301(a), of the compliance date associated with the PCCT standard of the Group IV Polymers and Resins NESHAP for certain existing affected sources. For further information, please see the information provided in the direct final rule that is located in the “Rules and Regulations” section of this Federal Register publication.

What Are the Administrative Requirements for This Pproposal?

Regulatory Flexibility Act (RFA), as amended by the Small Business Regulatory Enforcement Fairness Act of 1996 (SBREFA), 5 U.S.C. 601 et seq.

The RFA generally requires an agency to prepare a regulatory flexibility analysis of any rule subject to notice and comment rulemaking requirements, under the Administrative Procedure Act or another statute, unless the agency certifies that the rule will not have a significant economic impact on a substantial number of small entities. Small entities include small businesses, small organizations, and small governmental jurisdictions. For purposes of assessing the impacts of today's proposed rule on small entities, small entity is defined as: (1) A small business that is a business with less than 750 employees; (2) a small governmental jurisdiction that is a government of a city, county, town, school district or special district with a population of less than 50,000; and (3) a small organization that is any not-for-profit enterprise which is independently owned and operated and is not dominant in its field.

This proposed rule would not impose any requirements on small entities, because only one entity is subject to the PCCT standard and it is not a small entity. In addition, this proposed rule would relieve regulatory burden for all entities subject to the rule. After considering the economic impacts of today's proposed rule on small entities, I certify that this action will not have a significant economic impact on a substantial number of small entities.

For information regarding other administrative requirements for this action, please see the direct final rule that is located in the “Rules and Regulations” section of this Federal Register publication.

List of Subjects in 40 CFR Part 63

  • Environmental protection
  • Air pollution control
  • Hazardous substances
  • Intergovernmental relations
  • Reporting and recordkeeping requirements

Dated: August 21, 2000.

Carol M. Browner,

Administrator.

[FR Doc. 00-21908 Filed 8-28-00; 8:45 am]

BILLING CODE 6560-50-P