Mattresses From China; Scheduling of the Final Phase of an Antidumping Duty Investigation

AGENCY:

United States International Trade Commission.

ACTION:

Notice.

SUMMARY:

The Commission hereby gives notice of the scheduling of the final phase of antidumping investigation No. 731-TA-1424 (Final) pursuant to the Tariff Act of 1930 (“the Act”) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of mattresses from China, provided for in subheadings 9404.21.00, 9404.29.10, 9404.29.90, 9401.40.00, and 9401.90.50 of the Harmonized Tariff Schedule of the United States, preliminarily determined by the Department of Commerce (“Commerce”) to be sold at less-than-fair-value.

DATES:

May 28, 2019.

FOR FURTHER INFORMATION CONTACT:

Calvin Chang ((202) 205-3062), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server ( https://www.usitc.gov ). The public record for this investigation may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION:

Scope.—For purposes of this investigation, Commerce has defined the subject merchandise as all types of youth and adult mattresses. The term “mattress” denotes an assembly of materials that at a minimum includes a “core,” which provides the main support system of the mattress, and may consist of innersprings, foam, other resilient filling, or a combination of these materials. Mattresses may also contain (1) “upholstery,” the material between the core and the top panel of the ticking on a single-sided mattress, or between the core and the top and bottom panel of the ticking on a double-sided mattress; and/or (2) “ticking,” the outermost layer of fabric or other material (e.g., vinyl) that encloses the core and any upholstery, also known as a cover.

The scope of this investigation is restricted to only “adult mattresses” and “youth mattresses.” “Adult mattresses” have a width exceeding 35 inches, a length exceeding 72 inches, and a depth exceeding 3 inches on a nominal basis. Such mattresses are frequently described as “twin,” “extra-long twin,” “full,” “queen,” “king,” or “California king” mattresses. “Youth mattresses” have a width exceeding 27 inches, a length exceeding 51 inches, and a depth exceeding 1 inch (crib mattresses have a depth of 6 inches or less from edge to edge) on a nominal basis. Such mattresses are typically described as “crib,” “toddler,” or “youth” mattresses. All adult and youth mattresses are included regardless of actual size description.

The scope encompasses all types of “innerspring mattresses,” “non-innerspring mattresses,” and “hybrid mattresses.” “Innerspring mattresses” contain innersprings, a series of metal springs joined together in sizes that correspond to the dimensions of mattresses. Mattresses that contain innersprings are referred to as “innerspring mattresses” or “hybrid mattresses.” “Hybrid mattresses” contain two or more support systems as the core, such as layers of both memory foam and innerspring units.

“Non-innerspring mattresses” are those that do not contain any innerspring units. They are generally produced from foams (e.g., polyurethane, memory (viscoelastic), latex foam, gel-infused viscoelastic (gel foam), thermobonded polyester, polyethylene) or other resilient filling.

Mattresses covered by the scope of this investigation may be imported independently, as part of furniture or furniture mechanisms (e.g., convertible sofa bed mattresses, sofa bed mattresses imported with sofa bed mechanisms, corner group mattresses, day-bed mattresses, roll-away bed mattresses, high risers, trundle bed mattresses, crib mattresses), or as part of a set in combination with a “mattress foundation.” “Mattress foundations” are any base or support for a mattress. Mattress foundations are commonly referred to as “foundations,” “boxsprings,” “platforms,” and/or “bases.” Bases can be static, foldable, or adjustable. Only the mattress is covered by the scope if imported as part of furniture, with furniture mechanisms, or as part of a set in combination with a mattress foundation.

Excluded from the scope of this investigation are “futon” mattresses. A “futon” is a bi-fold frame made of wood, metal, or plastic material, or any combination thereof, that functions as both seating furniture (such as a couch, love seat, or sofa) and a bed. A “futon mattress” is a tufted mattress, where the top covering is secured to the bottom with thread that goes completely through the mattress from the top through to the bottom, and it does not contain innersprings or foam. A futon mattress is both the bed and seating surface for the futon.

Also excluded from the scope are airbeds (including inflatable mattresses) and waterbeds, which consist of air- or liquid-filled bladders as the core or main support system of the mattress.

Further, also excluded from the scope of this investigation are any products covered by the existing antidumping duty order on uncovered innerspring units. See Uncovered Innerspring Units from the People's Republic of China: Notice of Antidumping Duty Order, 74 FR 7661 (February 19, 2009).

Additionally, also excluded from the scope of this investigation are “mattress toppers.” A “mattress topper” is a removable bedding accessory that supplements a mattress by providing an additional layer that is placed on top of a mattress. Excluded mattress toppers have a height of four inches or less.

The products subject to this investigation are currently properly classifiable under Harmonized Tariff Schedule for the United States (HTSUS) subheadings: 9404.21.0010, 9404.21.0013, 9404.29.1005, 9404.29.1013, 9404.29.9085, and 9404.29.9087. Products subject to this investigation may also enter under HTSUS subheadings: 9404.21.0095, 9404.29.1095, 9404.29.9095, 9401.40.0000, and 9401.90.5081. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this investigation is dispositive.

Background.—The final phase of this investigation is being scheduled, pursuant to section 735(b) of the Tariff Act of 1930 (19 U.S.C. 1673d(b)), as a result of an affirmative preliminary determination by Commerce that imports of mattresses from China are being sold in the United States at less than fair value within the meaning of section 733 of the Act (19 U.S.C. 1673b). The investigation was requested in a petition filed on September 18, 2018, by Corsicana Mattress Company, Dallas, Texas; Elite Comfort Solutions, Newman, Georgia; Future Foam Inc., Council Bluffs, Iowa; FXI, Inc. Media, Pennsylvania; Innocor, Inc., Red Bank, New Jersey; Kolcraft Enterprises Inc., Chicago, Illinois; Leggett & Platt, Incorporated, Carthage, Missouri; Serta Simmons Bedding, LLC, Atlanta, Georgia; and Tempur Sealy International, Inc., Lexington, Kentucky.

For further information concerning the conduct of this phase of the investigation, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).

Participation in the investigation and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of this investigation as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigation need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigation.

Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to section 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of this investigation available to authorized applicants under the APO issued in the investigation, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigation. A party granted access to BPI in the preliminary phase of the investigation need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.

Staff report.—The prehearing staff report in the final phase of this investigation will be placed in the nonpublic record on September 19, 2019, and a public version will be issued thereafter, pursuant to section 207.22 of the Commission's rules.

Hearing.—The Commission will hold a hearing in connection with the final phase of this investigation beginning at 9:30 a.m. on Thursday, October 10, 2019, at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before October 4, 2019. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should participate in a prehearing conference to be held on October 8, 2019, at the U.S. International Trade Commission Building, if deemed necessary. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.

Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.23 of the Commission's rules; the deadline for filing is September 26, 2019. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of section 207.25 of the Commission's rules. The deadline for filing posthearing briefs is October 17, 2019. In addition, any person who has not entered an appearance as a party to the investigation may submit a written statement of information pertinent to the subject of the investigation, including statements of support or opposition to the petition, on or before October 17, 2019. On November 5, 2019, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before November 7, 2019, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission's rules. All written submissions must conform with the provisions of section 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on E-Filing, available on the Commission's website at https://edis.usitc.gov,, elaborates upon the Commission's rules with respect to electronic filing.

Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.

In accordance with sections 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigation must be served on all other parties to the investigation (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.

Authority: This investigation is being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission's rules.