Large Diameter Welded Pipe From the Republic of Turkey: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of large diameter welded pipe (welded pipe) from the Republic of Turkey (Turkey) for the period of investigation of January 1, 2017, through December 31, 2017. Interested parties are invited to comment on this preliminary determination.

DATES:

Applicable June 29, 2018.

FOR FURTHER INFORMATION CONTACT:

Ross Belliveau or Ajay Menon, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-4952 or (202) 482-1993, respectively.

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 703(b) of the Tariff Act of 1930, as amended (the Act). Commerce published the notice of initiation of this investigation on February 20, 2018. On April 2, 2018, Commerce postponed the preliminary determination of this investigation and the revised deadline is now June 19, 2018. For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum. A list of topics discussed in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov,, and is available to all parties in the Central Records Unit, room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/. The signed and electronic versions of the Preliminary Decision Memorandum are identical in content.

Scope of the Investigation

The product covered by this investigation is welded pipe from Turkey. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to Commerce's regulations, the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., scope). Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice.

For a summary of the product coverage comments and rebuttal responses submitted to the record for this preliminary determination, and accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. Commerce is preliminarily modifying the scope language as it appeared in the Initiation Notice. See revised scope in Appendix I. Interested parties will have the opportunity to submit case and rebuttal briefs on the preliminary scope determinations. We will notify parties of the due dates for these briefs at a later time.

Methodology

Commerce is conducting this investigation in accordance with section 701 of the Act. For each of the subsidy programs found countervailable, Commerce preliminarily determines that there is a subsidy, i.e., a financial contribution by an “authority” that gives rise to a benefit to the recipient, and that the subsidy is specific.

Alignment

In accordance with section 705(a)(1) of the Act and 19 CFR 351.210(b)(4), Commerce is aligning the final countervailing duty (CVD) determination in this investigation with the final determination in the companion antidumping duty (AD) investigation of welded pipe from Turkey based on a request made by American Cast Iron Pipe Company, Berg Steel Pipe Corp./Berg Spiral Pipe Corp, Dura-Bond Industries, Skyline Steel, Stupp Corporation, Greens Bayou Pipe Mill, LP, JSW Steel (USA) Inc., and Trinity Products LLC (collectively, the petitioners). Consequently, the final CVD determination will be issued on the same date as the final AD determination, which is currently scheduled to be issued no later than November 5, 2018, unless postponed.

All-Others Rate

Sections 703(d) and 705(c)(5)(A) of the Act provide that in the preliminary determination, Commerce shall determine an estimated all-others rate for companies not individually investigated. This rate shall be an amount equal to the weighted average of the estimated subsidy rates established for those companies individually investigated, excluding any zero and de minimis rates and any rates based entirely under section 776 of the Act.

In this investigation, Commerce calculated individual estimated countervailable subsidy rates for Borusan Mannesmann Boru Sanayi ve Ticaret A.S. (Borusan) and HDM Çelik Boru Sanayi ve Ticaret A.S. (HDM Celik) that are not zero, de minimis, or based entirely on facts otherwise available. Commerce calculated the all-others' rate using a weighted average of the individual estimated subsidy rates calculated for the examined respondents using each company's publicly-ranged values for the merchandise under consideration.

Preliminary Determination

Commerce preliminarily determines that the following estimated countervailable subsidy rates exist:

Suspension of Liquidation

In accordance with section 703(d)(1)(B) and (d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise as described in the scope of the investigation section entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register. Further, pursuant to 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the rates indicated above.

Disclosure

Commerce intends to disclose its calculations and analysis performed to interested parties in this preliminary determination within five days of its public announcement, or if there is no public announcement, within five days of the date of publication the notice of preliminary determination in the Federal Register, in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs. Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this investigation are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

International Trade Commission Notification

In accordance with section 703(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its preliminary determination. Pursuant to section 705(b)(2) of the Act, if the final determination is affirmative, the ITC will make its final injury determination before the later of 120 days after the date of this preliminary determination or 45 days after the final determination.

Notification to Interested Parties

This determination is issued and published pursuant to sections 703(f) and 777(i) of the Act and 19 CFR 351.205(c).

Appendix I

Scope of the Investigation

The merchandise covered by this investigation is welded carbon and alloy steel pipe (including stainless steel pipe), more than 406.4 mm (16 inches) in nominal outside diameter (large diameter welded pipe), regardless of wall thickness, length, surface finish, grade, end finish, or stenciling. Large diameter welded pipe may be used to transport oil, gas, slurry, steam, or other fluids, liquids, or gases. It may also be used for structural purposes, including, but not limited to, piling. Specifically, not included is large diameter welded pipe produced only to specifications of the American Water Works Association (AWWA) for water and sewage pipe.

Large diameter welded pipe used to transport oil, gas, or natural gas liquids is normally produced to the American Petroleum Institute (API) specification 5L. Large diameter welded pipe may also be produced to American Society for Testing and Materials (ASTM) standards A500, A252, or A53, or other relevant domestic specifications, grades and/or standards. Large diameter welded pipe can be produced to comparable foreign specifications, grades and/or standards or to proprietary specifications, grades and/or standards, or can be non-graded material. All pipe meeting the physical description set forth above is covered by the scope of this investigation, whether or not produced according to a particular standard.

Subject merchandise also includes large diameter welded pipe that has been further processed in a third country, including but not limited to coating, painting, notching, beveling, cutting, punching, welding, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope large diameter welded pipe.

Excluded from the scope are any products covered by the existing countervailing duty order on welded line pipe from the Republic of Turkey. See Welded Line Pipe from the Republic of Turkey: Countervailing Duty Order, 80 FR 75054 (December 1, 2015).

The large diameter welded pipe that is subject to this investigation is currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 7305.11.1030, 7305.11.1060, 7305.11.5000, 7305.12.1030, 7305.12.1060, 7305.12.5000, 7305.19.1030, 7305.19.1060, 7305.19.5000, 7305.31.4000, 7305.31.6010, 7305.31.6090, 7305.39.1000 and 7305.39.5000. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Injury Test

IV. Subsidies Valuation

V. Analysis of Programs

VI. Conclusion