Flight Simulation Training Device Qualification Standards for Extended Envelope and Adverse Weather Event Training Tasks

Download PDF
Federal RegisterMay 20, 2016
81 Fed. Reg. 32015 (May. 20, 2016)

Correction

14 CFR PART 60 [CORRECTED]

In FR Rule Doc. No. 2016-05860 beginning on page 18178 in the issue of March 30, 2016, make the following corrections:

1. Correct the table appearing on page 18240 to read as follows:

Table A1B—Table of Tasks vs. Simulator Level

Entry No. QPS Requirements Information
Subjective requirements In order to be qualified at the simulator qualification level indicated, the simulator must be able to perform at least the tasks associated with that level of qualification Simulator levels Notes
A B C D
*         *         *         *         *         *         *
3. Inflight Maneuvers.
*         *         *         *         *         *         *
3.b. High Angle of Attack Maneuvers
3.b.1 Approaches to Stall X X X X
3.b.2 Full Stall X X Stall maneuvers at angles of attack above the activation of the stall warning system.
Required only for FSTDs qualified to conduct full stall training tasks as indicated on the Statement of Qualification.
*         *         *         *         *         *         *
3.g. Upset Prevention and Recovery Training (UPRT) X X Upset recovery or unusual attitude training maneuvers within the FSTD's validation envelope that are intended to exceed pitch attitudes greater than 25 degrees nose up; pitch attitudes greater than 10 degrees nose down, and bank angles greater than 45 degrees.
*         *         *         *         *         *         *

2. Correct the table appearing on pages 18242-18282 to read as follows:

3. Correct the tables appearing on pages 18284-18300 to read as follows:

3. Correct the tables appearing on pages 18308-18326 to read as follows:

4. On page 18327, correct amendatory instruction 15 to read as follows:

15. Amend Attachment 2 to Appendix B as follows:

A. Revise paragraph 2.e;

B. Revise Table B2A;

C. Revise Table B2B;

D. Revise Table B2C;

E. Revise Table B2D; and

F. Revise Table B2E.

The revisions and additions read as follows:

5. Correct the tables appearing on pages 18329-18375 to read as follows:

6. Correct the tables appearing on pages 18377-18387 to read as follows:

[FR Doc. C1-2016-05860 Filed 5-19-16; 8:45 am]

BILLING CODE 1505-01-D