Electronic Submission Template for Medical Device 510(k) Submissions; Draft Guidance for Industry and Food and Drug Administration Staff; Availability

AGENCY:

Food and Drug Administration, HHS.

ACTION:

Notice of availability.

SUMMARY:

The Food and Drug Administration (FDA or Agency) is announcing the availability of the draft guidance entitled “Electronic Submission Template for Medical Device 510(k) Submissions.” FDA is issuing this draft guidance to introduce submitters of premarket notification (510(k)) submissions to the Center for Devices and Radiological Health and Center for Biologics Evaluation and Research to the current resources and associated content developed to support 510(k) electronic submissions to FDA. This draft guidance, when finalized, is intended to represent one of several steps in meeting FDA's commitment to the development of electronic submission templates to serve as guided submission preparation tools for industry to improve submission consistency and enhance efficiency in the review process. This draft guidance is not final nor is it in effect at this time.

DATES:

Submit either electronic or written comments on the draft guidance by November 29, 2021 to ensure that the Agency considers your comment on this draft guidance before it begins work on the final version of the guidance.

ADDRESSES:

You may submit comments on any guidance at any time as follows:

Electronic Submissions

Submit electronic comments in the following way:

• Federal eRulemaking Portal: https://www.regulations.gov. Follow the instructions for submitting comments. Comments submitted electronically, including attachments, to https://www.regulations.gov will be posted to the docket unchanged. Because your comment will be made public, you are solely responsible for ensuring that your comment does not include any confidential information that you or a third party may not wish to be posted, such as medical information, your or anyone else's Social Security number, or confidential business information, such as a manufacturing process. Please note that if you include your name, contact information, or other information that identifies you in the body of your comments, that information will be posted on https://www.regulations.gov.

• If you want to submit a comment with confidential information that you do not wish to be made available to the public, submit the comment as a written/paper submission and in the manner detailed (see “Written/Paper Submissions” and “Instructions”).

Written/Paper Submissions

Submit written/paper submissions as follows:

• Mail/Hand delivery/Courier (for written/paper submissions): Dockets Management Staff (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852.

• For written/paper comments submitted to the Dockets Management Staff, FDA will post your comment, as well as any attachments, except for information submitted, marked and identified, as confidential, if submitted as detailed in “Instructions.”

Instructions: All submissions received must include the Docket No. FDA-2021-D-0872 for “Electronic Submission Template for Medical Device 510(k) Submissions.” Received comments will be placed in the docket and, except for those submitted as “Confidential Submissions,” publicly viewable at https://www.regulations.gov or at the Dockets Management Staff between 9 a.m. and 4 p.m., Monday through Friday, 240-402-7500.

• Confidential Submissions—To submit a comment with confidential information that you do not wish to be made publicly available, submit your comments only as a written/paper submission. You should submit two copies total. One copy will include the information you claim to be confidential with a heading or cover note that states “THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION.” The Agency will review this copy, including the claimed confidential information, in its consideration of comments. The second copy, which will have the claimed confidential information redacted/blacked out, will be available for public viewing and posted on https://www.regulations.gov. Submit both copies to the Dockets Management Staff. If you do not wish your name and contact information to be made publicly available, you can provide this information on the cover sheet and not in the body of your comments and you must identify this information as “confidential.” Any information marked as “confidential” will not be disclosed except in accordance with 21 CFR 10.20 and other applicable disclosure law. For more information about FDA's posting of comments to public dockets, see 80 FR 56469, September 18, 2015, or access the information at: https://www.govinfo.gov/content/pkg/FR-2015-09-18/pdf/2015-23389.pdf.

Docket: For access to the docket to read background documents or the electronic and written/paper comments received, go to https://www.regulations.gov and insert the docket number, found in brackets in the heading of this document, into the “Search” box and follow the prompts and/or go to the Dockets Management Staff, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852, 240-402-7500.

You may submit comments on any guidance at any time (see § 10.115(g)(5) (21 CFR 10.115(g)(5)).

An electronic copy of the guidance document is available for download from the internet. See the SUPPLEMENTARY INFORMATION section for information on electronic access to the guidance. Submit written requests for a single hard copy of the draft guidance document entitled “Electronic Submission Template for Medical Device 510(k) Submissions” to the Office of Policy, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 5431, Silver Spring, MD 20993-0002; or Office of Communication, Outreach and Development, Center for Biologics Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 71, Rm. 3128, Silver Spring, MD 20993-0002. Send one self-addressed adhesive label to assist that office in processing your request.

FOR FURTHER INFORMATION CONTACT:

Rebecca Nipper, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 1540, Silver Spring, MD 20993-0002, 301-796-6527; or Stephen Ripley, Center for Biologics Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 71, Rm. 7301, Silver Spring, MD 20993, 240-402-7911.

SUPPLEMENTARY INFORMATION:

I. Background

Section 745A(b) of the Federal Food, Drug, and Cosmetic Act (FD&C Act) (21 U.S.C. 379k-1(b)), amended by section 207 of the FDA Reauthorization Act of 2017 (Pub. L. 115-52), requires that pre-submissions and submissions for devices under section 510(k), 513(f)(2)(A), 515(c), 515(d), 515(f), 520(g), 520(m), or 564 of the FD&C Act (21 U.S.C. 360(k), 360c(f)(2)(A), 360e(c), 360e(d), 360e(f), 360j(g), 360j(m), or 360bbb-3) or section 351 of the Public Health Service Act (42 U.S.C. 262) and any supplements to such pre-submissions or submissions, including appeals of those submissions, be submitted in electronic format specified by FDA beginning on such date as specified by FDA in final guidance. It also mandates that FDA issue a draft guidance not later than October 1, 2019, providing for further standards for the submission by electronic format, a timetable for establishment of these further standards, and criteria for waivers of and exemptions from the requirements.

In addition, in the Medical Device User Fee Amendments of 2017 (MDUFA IV) Commitment Letter from the Secretary of Health and Human Services to Congress, FDA committed to developing “electronic submission templates that will serve as guided submission preparation tools for industry to improve submission consistency and enhance efficiency in the review process” and “by FY [fiscal year] 2020, the Agency will issue a draft guidance document on the use of the electronic submission templates.” In addition, the Commitment Letter states that “[n]o later than 12 months after the close of the public comment period, the Agency will issue a final guidance.” FDA's guidance document “Providing Regulatory Submissions for Medical Devices in Electronic Format—Submissions Under Section 745A(b) of the Federal Food, Drug, and Cosmetic Act” issued July 15, 2020 (the “parent guidance”) was intended to satisfy the final guidance documents referenced in section 745A(b)(3) of the FD&C Act and the MDUFA IV Commitment Letter. A notice of availability of the parent guidance appeared in the Federal Register of July 15, 2020 (85 FR 42864).

In the parent guidance, the Agency concluded that it is not feasible to describe and implement the electronic format(s) that would apply to all the submissions covered by section 745A(b) of the FD&C Act in one guidance document. Accordingly, the parent guidance describes how FDA interprets and plans to implement the requirements of section 745A(b)(3) of the FD&C Act, while individual guidances will be developed to specify the formats for specific submissions and corresponding timetables for implementation. The current draft guidance “Electronic Submission Template for Medical Device 510(k) Submissions” is the first of these individual guidances that, when finalized, will specify the format for 510(k) submissions and a corresponding timetable for implementation.

In section 745A(b) of the FD&C Act, Congress granted explicit statutory authorization to FDA to specify in guidance the statutory requirement for electronic submissions solely in electronic format by providing standards, a timetable, and criteria for waivers and exemptions. To the extent that this draft guidance provides such requirements under section 745A(b)(3) of the FD&C Act ( i.e., standards, timetable, criteria for waivers of and exemptions), indicated by the use of the mandatory words, such as must or required, this document is not subject to the usual restrictions in FDA's good guidance practice regulations, such as the requirement that guidances not establish legally enforceable responsibilities. (See § 10.115(d).)

To the extent that this draft guidance describes recommendations that are not standards, timetable, criteria for waivers of, or exemptions under section 745A(b)(3) of the FD&C Act, it is being issued in accordance with FDA's good guidance practices regulation (§ 10.115). This draft guidance, when finalized, will represent the current thinking of FDA on this topic. It does not establish any rights for any person and is not binding on FDA or the public. You can use an alternative approach if it satisfies the requirements of the applicable statutes and regulations. This draft guidance, when finalized, will contain both binding and nonbinding provisions.

II. Electronic Access

Persons interested in obtaining a copy of the draft guidance may do so by downloading an electronic copy from the internet. A search capability for all Center for Devices and Radiological Health guidance documents is available at https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/guidance-documents-medical-devices-and-radiation-emitting-products. This guidance document is also available at https://www.regulations.gov,, https://www.fda.gov/regulatory-information/search-fda-guidance-documents,, or https://www.fda.gov/vaccines-blood-biologics/guidance-compliance-regulatory-information-biologics/biologics-guidances. Persons unable to download an electronic copy of “Electronic Submission Template for Medical Device 510(k) Submissions” may send an email request to CDRH-Guidance@fda.hhs.gov to receive an electronic copy of the document. Please use the document number 19006 and complete title to identify the guidance you are requesting.

III. Paperwork Reduction Act of 1995

While this guidance contains no new collection of information, it does refer to previously approved FDA collections of information. Therefore, clearance by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3501-3521) is not required for this guidance. The previously approved collections of information are subject to review by OMB under the PRA. The collections of information in the following FDA regulations, guidance, and forms have been approved by OMB as listed in the following table:

IV. Other Issues for Consideration

The Agency invites comments on the “Electronic Submission Template for Medical Device 510(k) Submissions” draft guidance, in general, and on the following questions, in particular:

• Is a minimum of 1 year an adequate amount of time to transition to submissions solely in electronic format for 510(k) submissions using the eSTAR template?
• If a minimum of 1 year is not adequate, how much time would be necessary for you to transition to use of eSTAR as the required format for 510(k) submission?