CSA Group Testing & Certification Inc.: Grant of Expansion of Recognition

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces the final decision to expand the scope of recognition for CSA Group Testing & Certification Inc. for expansion of recognition as a Nationally Recognized Testing Laboratory (NRTL).

DATES:

The expansion of the scope of recognition becomes effective on May 11, 2021.

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor by phone (202) 693-1999 or email meilinger.francis2@dol.gov.

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor by phone (202) 693-2110 or email robinson.kevin@dol.gov.

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

OSHA hereby gives notice of the expansion of the scope of recognition of CSA Group Testing & Certification Inc. (CSA) as a NRTL. CSA's expansion covers the addition of four test standards to the NRTL scope of recognition.

OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.

The agency processes an application by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A, 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides the preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including CSA, which details the NRTL's scope of recognition. These pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.

CSA submitted an application, dated July 17, 2019 (OSHA-2006-0042-0018), to expand their recognition to include four additional test standards. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

OSHA published the preliminary notice announcing CSA's expansion application in the Federal Register on February 23, 2021 (86 FR 11004). The agency requested comments by March 10, 2021, but it received no comments in response to this notice. OSHA is now proceeding with this final notice to grant expansion of CSA's scope of recognition.

To obtain or review copies of all public documents pertaining to the CSA's application, go to http://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, Docket No. OSHA-2006-0042 contains all materials in the record concerning CSA's recognition. Please note: Due to the COVID-19 pandemic, the Docket Office is closed to the public at this time but can be contacted at (202) 693-2350.

II. Final Decision and Order

OSHA staff examined CSA's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that CSA meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant CSA's scope of recognition. OSHA limits the expansion of CSA's recognition to testing and certification of products for demonstration of conformance to the test standards listed below in Table 1.

OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.

The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

A. Conditions

In addition to those conditions already required by 29 CFR 1910.7, CSA must abide by the following conditions of the recognition:

1. CSA must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);

2. CSA must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and

3. CSA must continue to meet the requirements for recognition, including all previously published conditions on CSA's scope of recognition, in all areas for which it has recognition.

Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of CSA as a NRTL, subject to the limitations and conditions specified above.

III. Authority and Signature

James S. Frederick, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to Section 29 U.S.C. 655(6)(d), Secretary of Labor's Order No. 8-2020 (85 FR 58393; Sept. 18, 2020), and 29 CFR 1905.11.