Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products From India: Preliminary Affirmative Determination

Download PDF
Federal RegisterNov 6, 2015
80 Fed. Reg. 68854 (Nov. 6, 2015)

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (“Department”) preliminarily determines that countervailable subsidies are being provided to producers and exporters of certain corrosion-resistant steel products (“corrosion-resistant steel”) from India. The period of investigation is January 1, 2014, through December 31, 2014. We invite interested parties to comment on this preliminary determination.

DATES:

Effective November 6, 2015.

FOR FURTHER INFORMATION CONTACT:

Jerry Huang, Andrew Devine, or Matthew Renkey, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone 202.482.4047, 202.482.0238, and 202.482.2312, respectively.

SUPPLEMENTARY INFORMATION:

Scope of the Investigation

The products covered by this investigation are corrosion-resistant steel products from India. For a complete description of the scope of this investigation, see Appendix II.

Methodology

The Department is conducting this countervailing duty (“CVD”) investigation in accordance with section 701 of the Tariff Act of 1930, as amended (“Act”). For a full description of the methodology underlying our preliminary conclusions, see the Preliminary Decision Memo. The Preliminary Decision Memo is a public document and is on file in the Central Records Unit (“CRU”), Room B8024 of the main Department of Commerce building, as well as electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (“ACCESS”). ACCESS is available to registered users at https://access.trade.gov and it is available to all parties in the CRU. In addition, parties can directly access a complete version of the Preliminary Decision Memo on the internet at http://enforcement.trade.gov/frn/index.html. The signed Preliminary Decision Memo and the electronic versions of the Preliminary Decision Memo are identical in content.

See Memorandum from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Enforcement and Compliance, “Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products from India: Decision Memorandum for the Preliminary Determination,” dated concurrently with this notice (“Preliminary Decision Memo”).

Preliminary Determination and Suspension of Liquidation

In accordance with section 703(d)(1)(A)(i) of the Act, we calculated an individual rate for each producer/exporter of the subject merchandise individually investigated. We preliminarily determine the countervailable subsidy rates to be:

Company Subsidy rate (percent)
JSW Steel Limited and JSW Steel Coated Products Limited 2.85.
Uttam Galva Steels Limited and Uttam Value Steels Limited 7.71.
All Others 5.28.

In accordance with sections 703(d)(1)(B) and (d)(2) of the Act, we are directing U.S. Customs and Border Protection to suspend liquidation of all entries of corrosion-resistant steel from India that are entered, or withdrawn from warehouse, for consumption on or after the date of the publication of this notice in the Federal Register, and to require a cash deposit for such entries of merchandise in the amounts indicated above.

In accordance with sections 703(d) and 705(c)(5)(A) of the Act, for companies not investigated, we apply an “all-others” rate, which is normally calculated by weighting the subsidy rates of the individual companies selected as respondents by those companies' exports of the subject merchandise to the United States. Under section 705(c)(5)(i) of the Act, the all-others rate should exclude zero and de minimis rates calculated for the exporters and producers individually investigated. Where the rates for the investigated companies are all zero or de minimis, section 705(c)(5)(A)(ii) of the Act instructs the Department to establish an all-others rate using “any reasonable method.” We have not calculated the “all-others” rate by weight averaging the rates of the two individually investigated respondents, because doing so risks disclosure of proprietary information. Therefore, and consistent with the Department's practice, for the “all-others” rate, we calculated a simple average of the two responding firms' rates.

See, e.g., Countervailing Duty Investigation of Chlorinated Isocyanurates from the People's Republic of China: Preliminary Determination and Alignment of Final Determination With Final Antidumping Determination, 79 FR 10097 (February 24, 2014).

Verification

As provided in section 782(i)(1) of the Act, we intend to verify the information submitted in response to the Department's questionnaires prior to making our final determination.

Disclosure and Public Comment

The Department intends to disclose calculations performed for this preliminary determination to the parties within five days of the date of public announcement of this determination in accordance with 19 CFR 351.224(b). Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the final verification report is issued in this proceeding, and rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs. A table of contents, list of authorities used and an executive summary of issues should accompany any briefs submitted to the Department. This summary should be limited to five pages total, including footnotes.

See 19 CFR 351.309; see also 19 CFR 351.303 (for general filing requirements).

Interested parties who wish to request a hearing, or to participate if one is requested, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, filed electronically using ACCESS. An electronically filed document must be received successfully in its entirety by the Department's electronic records system, ACCESS, by 5:00 p.m. Eastern Standard Time, within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number; the number of participants; and a list of the issues to be discussed. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, at a date, time and location to be determined. Parties will be notified of the date, time and location of any hearing.

International Trade Commission Notification

In accordance with section 703(f) of the Act, we will notify the International Trade Commission (“ITC”) of our determination. In addition, we are making available to the ITC all non-privileged and non-proprietary information relating to this investigation. We will allow the ITC access to all privileged and business proprietary information in our files, provided the ITC confirms that it will not disclose such information, either publicly or under an administrative protective order, without the written consent of the Assistant Secretary for Enforcement and Compliance.

In accordance with section 705(b)(2) of the Act, if our final determination is affirmative, the ITC will make its final determination within 45 days after the Department makes its final determination.

This determination is issued and published pursuant to sections 703(f) and 777(i) of the Act and 19 CFR 351.205(c).

Dated: November 2, 2015.

Paul Piquado,

Assistant Secretary for Enforcement and Compliance.

Appendix I—List of Topics Discussed in the Preliminary Decision Memo

I. Summary

II. Background

III. Scope Comments

IV. Scope of the Investigation

V. Preliminary Determination of Critical Circumstances

VI. Injury Test

VII. Subsidies Valuation

VIII. Benchmarks and Discount Rates

IX. Analysis of Programs

X. Calculation of the All Others Rate

XI. ITC Notification

XII. Disclosure and Public Comment

XIII. Verification

XIV. Conclusion

Appendix II—Scope of the Investigation

The products covered by this investigation are certain flat-rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been “worked after rolling” (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above:

(1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and

(2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies.

Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

  • 2.50 percent of manganese, or
  • 3.30 percent of silicon, or
  • 1.50 percent of copper, or
  • 1.50 percent of aluminum, or
  • 1.25 percent of chromium, or
  • 0.30 percent of cobalt, or
  • 0.40 percent of lead, or
  • 2.00 percent of nickel, or
  • 0.30 percent of tungsten (also called wolfram), or
  • 0.80 percent of molybdenum, or
  • 0.10 percent of niobium (also called columbium), or
  • 0.30 percent of vanadium, or
  • 0.30 percent of zirconium

Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium.

For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels and high strength low alloy (HSLA) steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum.

Furthermore, this scope also includes Advanced High Strength Steels (AHSS) and Ultra High Strength Steels (UHSS), both of which are considered high tensile strength and high elongation steels.

All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation:

  • Flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (“terne plate”), or both chromium and chromium oxides (“tin free steel”), whether or not painted, varnished or coated with plastics or other non-metallic substances in addition to the metallic coating;
  • Clad products in straight lengths of 4.7625 mm or more in composite thickness and of a width which exceeds 150 mm and measures at least twice the thickness; and
  • Certain clad stainless flat-rolled products, which are three-layered corrosion-resistant flat-rolled steel products less than 4.75 mm in composite thickness that consist of a flat-rolled steel product clad on both sides with stainless steel in a 20%-60%-20% ratio.

The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, and 7212.60.0000.

The products subject to the investigation may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.91.0000, 7225.92.0000, 7225.99.0090, 7226.99.0110, 7226.99.0130, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000.

The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive.

[FR Doc. 2015-28447 Filed 11-5-15; 8:45 am]

BILLING CODE 3510-DS-P