AGENCY:
Import Administration, International Trade Administration, Department of Commerce.
ACTION:
Notice of final results of expedited sunset review: Corrosion-resistant carbon steel flat products from Germany.
SUMMARY:
On September 1, 1999, the Department of Commerce (“the Department”) published the notice of initiation of sunset review of the antidumping duty order on corrosion-resistant carbon steel flat products from Germany (64 FR 47767), pursuant to section 751(c) of the Tariff Act of 1930, as amended (“the Act”). On the basis of a notice of intent to participate and adequate substantive response filed on behalf of domestic interested parties and a waiver of participation from respondent interested parties, we determined to conduct an expedited sunset review. Based on our analysis of the comments received, we find that revocation of the antidumping duty order would be likely to lead to continuation or recurrence of dumping at the levels listed below in the section entitled Final Results of the Review.
EFFECTIVE DATE:
April 6, 2000.
FOR FURTHER INFORMATION CONTACT:
Eun W. Cho or Melissa G. Skinner, Office of Policy for Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-1698 or (202) 482-1560, respectively.
SUPPLEMENTARY INFORMATION:
The Applicable Statute
Unless otherwise indicated, all citations to the Act are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Act by the Uruguay Round Agreements Act (“URAA”). In addition, unless otherwise indicated, all citations to the Department's regulations are to 19 CFR part 351 (1999). Guidance on methodological or analytical issues relevant to the Department's conduct of sunset reviews is set forth in the Department's Policy Bulletin 98:3—Policies Regarding the Conduct of Five-year (“Sunset”) Reviews of Antidumping and Countervailing Duty Orders; Policy Bulletin, 63 FR 18871 (April 16, 1998) (Sunset Policy Bulletin).
Background
On September 1, 1999, the Department published the notice of initiation of sunset review of the antidumping duty order on corrosion-resistant carbon steel flat products from Germany (64 FR 47767). We invited parties to comment. On the basis of a notice of intent to participate and adequate substantive response filed on behalf of domestic interested parties and a waiver of participation from respondent interested parties, we determined to conduct an expedited sunset review. The Department is conducting this sunset review in accordance with sections 751 and 752 of the Act.
In accordance with section 751(c)(5)(C)(v) of the Act, the Department may treat a review as extraordinarily complicated if it is a review of a transition order (i.e., an order in effect on January 1, 1995). This review concerns a transition order within the meaning of section 751(c)(6)(C)(ii) of the Act. Therefore, on December 22, 1999, the Department determined that the sunset review of the antidumping duty order on corrosion-resistant carbon steel flat products from Germany is extraordinarily complicated and extended the time limit for completion of the final results of this review until not later than March 29, 2000, in accordance with section 751(c)(5)(B) of the Act.
See Extension of Time Limit for Final Results of Five-Year Reviews, 64 FR 71726 (December 22, 1999).
Scope of Review
The products covered by this order are corrosion-resistant carbon steel flat products (“corrosion-resistant steel”) from Germany. This scope includes flat-rolled carbon steel products, of rectangular shape, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel-or iron-based alloys, whether or not corrugated or painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating, in coils (whether or not in successively superimposed layers) and of a width of 0.5 inch or greater, or in straight lengths which, if of a thickness less than 4.75 millimeters, are of a width of 0.5 inch or greater and which measures at least 10 times the thickness or if of a thickness of 4.75 millimeters or more are of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule (“HTS”) under item numbers 7210.31.0000, 7210.39.0000, 7210.41.0000, 7210.49.0030, 7210.49.0090, 7210.60.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.1000, 7210.90.6000, 7210.90.9000, 7212.21.0000, 7212.29.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7215.90.1000, 7215.90.5000, 7217.12.1000, 7217.13.1000, 7217.19.1000, 7217.19.5000, 7217.22.5000, 7217.23.5000, 7217.29.1000, 7217.29.5000, 7217.32.5000, 7217.33.5000, 7217.39.1000, and 7217.39.5000. Included in this scope are flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been worked after rolling)—for example, products which have been bevelled or rounded at the edges. Excluded from this scope are flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (“terne plate”), or both chromium and chromium oxides (“tin-free steel”), whether or not painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating. Also excluded from this scope are clad products in straight lengths of 0.1875 inch or more in composite thickness and of a width which exceeds 150 millimeters and measures at least twice the thickness. Also excluded from this scope are certain clad stainless flat-rolled products, which are three-layered corrosion-resistant carbon steel flat-rolled products less than 4.75 millimeters in composite thickness that consist of a carbon steel flat-rolled product clad on both sides with stainless steel in a 20%-60%-20% ratio.
On September 22, 1999, the Department issued the final results of a changed circumstances review partially revoking the order with respect to certain corrosion-resistant steel.
See Notice of Final Results of Changed Circumstances Antidumping Duty and Countervailing Duty Reviews and Revocation of Orders in Part: Certain Corrosion-Resistant Carbon Steel Flat Products From Germany, 64 FR 51292 (September 22, 1999). The Department noted that the affirmative statement of no interest by petitioners, combined with the lack of comments from interested parties, is sufficient to warrant partial revocation. This partial revocation applies to certain corrosion-resistant deep-drawing carbon steel strip, roll-clad on both sides with aluminum (AlSi) foils in accordance with St3 LG as to EN 10139/10140. The merchandise's chemical composition encompasses a core material of U St 23 (continuous casting) in which carbon is less than 0.08; manganese is less than 0.30; phosphorous is less than 0.20; sulfur is less than 0.015; aluminum is less than 0.01; and the cladding material is a minimum of 99% aluminum with silicon/copper/iron of less than 1%. The products are in strips with thicknesses of 0.07mm to 4.0mm (inclusive) and widths of 5mm to 800mm (inclusive). The thickness ratio of aluminum on either side of steel may range from 3%/94%/3% to 10%/80%/10%.
The HTS item numbers are provided for convenience and custom purposes. The written description remains dispositive.
Analysis of Comments Received
All issues raised in substantive responses by parties to this sunset review are addressed in the Issues and Decision Memorandum (“Decision Memo”) from Jeffrey A. May, Director, Office of Policy, Import Administration, to Robert S. LaRussa Assistant Secretary for Import Administration, dated March 29, 2000, which is hereby adopted by this notice. The issues discussed in the attached Decision Memo include the likelihood of continuation or recurrence of dumping and the magnitude of the margin likely to prevail were the order revoked. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendations in this public memorandum which is on file in B-099, the Central Records Unit, of the main Commerce building.
In addition, a complete version of the Decision Memo can be accessed directly on the Web at www.ita.doc.gov/import_admin/records/frn. The paper copy and electronic version of the Decision Memo are identical in content.
Final Results of Review
We determine that revocation of the antidumping duty order would be likely to lead to continuation or recurrence of dumping at the following percentage weighted-average margins:
| Manufacturer/exporter | Margin (percent) |
|---|---|
| Thyssen | 10.02 |
| All others | 10.02 |
This notice also serves as the only reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305 of the Department's regulations. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.
We are issuing and publishing this determination and notice in accordance with sections section 751(c), 752, and 777(i) of the Act.
Dated: March 29, 2000.
Joseph A. Spetrini,
Acting Assistant Secretary for Import Administration.
[FR Doc. 00-8554 Filed 4-5-00; 8:45 am]
BILLING CODE 3510-DS-P