Certain New Chemicals; Receipt and Status Information for February 2021

Download PDF
Federal RegisterMar 23, 2021
86 Fed. Reg. 15478 (Mar. 23, 2021)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA Section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 02/01/2021 to 02/28/2021.

DATES:

Comments identified by the specific case number provided in this document must be received on or before April 22, 2021.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2021-0068 and the specific case number for the chemical substance related to your comment, by using the Federal eRulemaking Portal at http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.

Due to the public health concerns related to COVID-19, the EPA Docket Center (EPA/DC) and Reading Room is closed to visitors with limited exceptions. The staff continues to provide remote customer service via email, phone, and webform. For the latest status information on EPA/DC services and docket access, visit https://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Jim Rahai, Project Management and Operations Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: rahai.jim@epa.gov.

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. Executive Summary

What action is the Agency taking?

This document provides the receipt and status reports for the period from 02/01/2021 to 02/28/2021. The Agency is providing notice of receipt of PMNs, SNUNs, and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review.

EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.

B. What is the Agency's authority for taking this action?

Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et seq., a chemical substance may be either an “existing” chemical substance or a “new” chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” (See TSCA section 3(11).) For more information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.

Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).

TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.

Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review.

C. Does this action apply to me?

This action provides information that is directed to the public in general.

D. Does this action have any incremental economic impacts or paperwork burdens?

No.

E. What should I consider as I prepare my comments for EPA?

1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.

II. Status Reports

In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (See the Federal Register of May 12, 1995 (60 FR 25798) (FRL-4942-7). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.

III. Receipt Reports

For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.

As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter “A” (e.g., P-18-1234A). The version column designates submissions in sequence as “1”, “2”, “3”, etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables.

Table I—PMN/SNUN/MCANs Approved * From 02/01/2021 to 02/28/2021

Case No. Version Received date Manufacturer Use Chemical substance
J-21-0005 3 01/14/2021 CBI (G) Chemical production (G) Modified Saccharomyces cerevisiae enhanced ethanol yield.
J-21-0006 3 01/14/2021 CBI (G) Chemical production (G) Modified Saccharomyces cerevisiae enhanced ethanol yield.
P-18-0128A 5 02/22/2021 CBI (G) Surface modifier (S) Inulin, 2-hydroxy-3-(trimethylammonio)propyl ether, chloride.
P-18-0135A 5 02/03/2021 CBI (G) Ingredient for household products (S) 1,2-Decanediol.
P-18-0256A 5 02/10/2021 CBI (G) Chemical Intermediate (S) Undecanol, branched.
P-18-0273A 7 02/25/2021 CBI (G) Used in polymer manufacturing (S) 1,4-Cyclohexanedicarboxylic acid, 1,4-bis(2-ethylhexyl) ester.
P-18-0289A 9 02/15/2021 Guard Products (G) Gas scrubbing, landfill deoderizing (G) 2-(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
P-18-0289A 10 02/15/2021 Guard Products (G) Gas scrubbing, landfill deoderizing (G) 2-(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
P-18-0290A 9 02/15/2021 Guard Products (G) Gas scrubbing, wastewater deodorizing (G) Carbomonocylic-oxazolidine.
P-18-0290A 10 02/15/2021 Guard Products (G) Gas scrubbing, wastewater deodorizing (G) Carbomonocylic-oxazolidine.
P-18-0293A 8 02/02/2021 Sirrus, Inc (S) Intermediate: Monomer used as a chemical, in the manufacture of polymers, Adhesives: Monomer used in the manufacture (formulation) of adhesives, Coatings: Monomer used in the manufacture of industrial coatings (S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
P-18-0293A 9 02/02/2021 Sirrus, Inc (S) Intermediate: Monomer used as a chemical, in the manufacture of polymers, Adhesives: Monomer used in the manufacture (formulation) of adhesives, Coatings: Monomer used in the manufacture of industrial coatings (S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
P-18-0294A 8 02/02/2021 Sirrus, Inc (S) Intermediate: Monomer for use in emulsion polymers, Adhesives: Monomer for use in formulated industrial adhesives, Coatings: Monomer for use in formulated industrial coatings (S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
P-18-0294A 9 02/02/2021 Sirrus, Inc (S) Intermediate: Monomer used as a chemical, in the manufacture of polymers, Adhesives: Monomer used in the manufacture (formulation) of adhesives, Coatings: Monomer used in the manufacture of industrial coatings (S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
P-18-0301A 3 02/02/2021 CBI (G) Coating component (G) Alkanedioic acid, polymer with cycloalkyl dimethanol, alkyl and cycloalkyl diisocyanates, dimethyl-alkanediol, dihydroxyalkanoic acid methylenebis[isocyanatocyclohexane, hydroxyethyl acrylate- and polyalkyl glycol monoalkyl ether blocked.
P-18-0383A 5 02/02/2021 CBI (G) Coatings and inks for commercial use (G) Dialkyl-alkanediamine, polymer with [(oxo-alkenyl)oxy]poly(oxy-alkanediyl)ether with bis(hydroxyalkyl)-alkanediol.
P-19-0122A 4 02/10/2021 CBI (G) Reactant monomer in a polymer for industrial use (G) 2-propenoic acid, 2-(hydrogenated animal-based nitrogen-substituted) ethyl ester.
P-19-0160A 3 02/09/2021 CBI (S) Component of a UV curable printing ink (G) Alkanesulfonic acid, 2-[(2-aminoethyl)heteroatom-substituted]-, sodium salt (1:1), polymer with alpha-[2,2-bis(hydroxymethyl)butyl]-omega-methoxypoly(oxy-1,2-ethanediyl) and 1,1′-methylenebis[4-isocyanatocyclohexane], acrylic acid-dipenthaerythritol reaction products- and polypropylene glycol ether with pentaerythritol (4:1) triacrylate-blocked.
P-20-0071A 9 02/18/2021 CBI (G) Colorant (G) Salt of 2-Naphthalenesulfonic acid, hydroxy [(methoxy-methyl-4-sulfophenyl)diazenyl].
P-20-0083A 3 02/10/2021 CBI (G) Reactant monomer in a polymer for industrial use (G) 2-propenoic acid, nitrogen-substituted alkyl, N-C16-18-acyl derivs.
P-20-0097A 5 02/19/2021 Nelson Brothers, LLC (S) The PMN substance will be used as an emulsifier for applications in explosives (G) Butanedioic acid, monopolyisobutylene derivs., mixed dihydroxyalkyl and hydroxyalkoxyalkyl diesters.
P-20-0110A 2 02/02/2021 Clariant Corporation (S) Base oil additive for lubricants and greases (G) Oxirane, 2-methyl-, polymer with oxirane, (alkoxyalkoxy)alkyl alkyl ether.
P-20-0124A 2 02/05/2021 CBI (G) Additive in Household consumer products (S) 5-octen-4-ol, 3,5-dimethyl-, (5E)-.
P-20-0126A 2 02/05/2021 CBI (G) Additive in household consumer products (S) 4-Decenal, 5,9-dimethyl-.
P-20-0132A 2 02/08/2021 Designer Molecules, Inc (G) Adhesive component (S) 1H-Pyrrole-2,5-dione, 3-methyl-, 1,1′-C36-alkylenebis-.
P-20-0148A 3 01/29/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0148A 4 02/08/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0148A 5 02/10/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0149A 3 01/29/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0149A 4 02/08/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0149A 5 02/10/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0150A 3 01/29/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0150A 4 02/08/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0150A 5 02/10/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0151A 3 01/29/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0151A 4 02/08/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0151A 5 02/10/2021 Solugen, Inc (G) Additive for consumer, industrial, and commercial uses (G) Hydroxyalkanoic acid, salt, oxidized.
P-20-0167A 4 02/11/2021 W.R. Grace & Co.—Conn (G) Catalyst (G) Phenylene, alkyl and polycarbomonocycle substituted, 1,2-dicarboxylate.
P-20-0168A 6 02/10/2021 CBI (S) Lubricating additives for engine oils, transmission and hydraulic fluid and gear oil applications (G) Polyolefin polyamine succinimide, carbopolycycle alkoxylated.
P-20-0183A 3 02/10/2021 CBI (G) Intermediate (G) Aryl ether epoxide, homopolymer, ether with alkanolamine.
P-21-0015A 2 01/28/2021 Designer Molecules, Inc (S) As a raw material in a Temporary Bonding Adhesive formulation (S) Amines, C36-alkylenedi-, polymers with 5,5′-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis[1,3-isobenzofurandione] and 4,4′-[2,2,2-trifluoro-1-(trifluoromethyl)ethylidene]bis[2-aminophenol].
P-21-0036 2 02/04/2021 CBI (G) Additive in Household consumer products (S) 5-Hexen-2-one, 1-bicyclo[2.2.1]hept-2-yl-.
P-21-0039A 2 02/03/2021 Sinova Specialties, Inc (S) Part of a series of chemicals used as viscosity modifiers in commercial and consumer engine oil (S) 1,2,4,5-Benzenetetracarboxamide, N1, N2, N4, N5-tetrahexyl-.
P-21-0040A 2 02/03/2021 Sinova Specialties, Inc (S) Part of a series of chemicals used as viscosity modifiers in commercial and consumer engine oil (S) 1,2,4,5-Benzenetetracarboxamide, N1,N2,N4,N5-tetraoctyl-.
P-21-0041A 2 02/03/2021 Sinova Specialties, Inc (S) Part of a series of chemicals used as viscosity modifiers in commercial and consumer engine oil (S) 1,2,4,5-Benzenetetracarboxamide, N1,N2,N4,N5-tetradodecyl-.
P-21-0051A 3 02/15/2021 Designer Molecules, Inc (G) Resin component of an adhesive formulation (S) Fatty Acids, C18-unsatd., dimers, hydrogenated, polymers with 2-hydroxyethyl-terminated hydrogenated polybutadiene, bis(2,5-dihydro-2,5-dioxo-1H-pyrrole-1-hexanoate).
P-21-0055 2 02/01/2021 Hexion, Inc (G) adhesive used for coating formulation (G) fatty acids, reaction products with polyamine-polyacid polymer and fatty acid.
P-21-0055A 3 02/04/2021 Hexion, Inc (G) adhesive used for coating formulation (G) fatty acids, reaction products with polyamine-polyacid polymer and fatty acid.
P-21-0055A 4 02/23/2021 Hexion, Inc (G) adhesive used for coating formulation (G) fatty acids, reaction products with polyamine-polyacid polymer and fatty acid.
P-21-0059 2 02/17/2021 CBI (G) Stabilizer (S) Methanesulfonic acid,1,1,1-trifluoro-, ytterbium(3+) salt (3:1).
P-21-0060A 3 02/03/2021 CBI (G) Isolated intermediate (G) Bisphenol A epichlorohydrin polymer with alkylpolyalkene-polyarylene-hydroxypolyoxyalkyldiyl reaction products with alkylalkylidene-alkylalkylidene-aminoalkyl-alkanepolyamine and alkylaminoalkanol.
P-21-0061A 3 02/03/2021 CBI (G) Component in coatings (G) Sulfur based acid, compds. with modified bisphenol A-epichlorohydrin-polyalkylene polyol ether with bisphenol A polymer-N-dialkylalkylidene-N-(dialkylalklyidene)aminoalkyl-alkanepolyamine-alkylaminoalkanol reaction products.
P-21-0062A 3 02/03/2021 CBI (G) Component in coatings (G) Substituted-alkanoic acid, compds. with modified bisphenol A-epichlorohydrin-polyalkylene polyol ether with bisphenol A polymer-N-dialkylalkylidene-N-dialkylalkylideneaminoalkyl-alkanepolyamine-alkylaminoalkanol reaction products.
P-21-0066 4 02/08/2021 L & L Products (S) Blended or stand alone, epoxy curative (hardener) and foaming agent when blended with certain ingredients (G) 1,2-alcandiol, 3-aryloxy, mono phosphate ester.
P-21-0074A 2 02/15/2021 Designer Molecules, Inc (G) Resin component of an adhesive formulation (S) 1,3-Butadiene, homopolymer, hydrogenated, 2-(ethenyloxy)ethyl-terminated.
P-21-0075A 2 02/04/2021 Allnex USA, Inc (S) Coating Resin (G) Alkanoic acid, hydroxy-(hydroxyalkyl)-alkyl-, polymer with alpha-[(hydroxyalkyl)alkyl]-omega-alkoxypoly(oxy-alkanediyl), dialkyl carbonate, alkanediol, alkylene[isocyanato-carbomonocycle] and [oxybis(alkylene)]bis[alkyl-alkanediole] alkenoate, compd. with dialkyalkanamine.
P-21-0076 2 02/09/2021 CBI (S) Additive for fluids used in oil drilling operations (G) Alcohols, C16-18 and C18-unsatd., reaction products with subsstituted alkyloxirane and alkyl acid.
P-21-0077 1 02/02/2021 Rahn USA Corp (G) Battery additive (S) Tinci_PMN3.
P-21-0078 1 02/02/2021 Pinova, Inc (S) Tackifying additive used in tire manufacture; Tackifying additive used in hot melt adhesive applications (G) Phenol, polymer with alkyl-(alkylalkylenyl)cyclohexene, mixed dialkylcyclohexadienes, mixed alkyl-(alkylalkylidene)cyclohexenes and 3,7,7-trimethylbicyclo[4.1.0]hept-3-ene.
P-21-0078A 2 02/23/2021 Pinova, Inc (S) Tackifying additive used in tire manufacture; Tackifying additive used in hot melt adhesive applications (G) Phenol, polymer with alkyl-(alkylalkylenyl)cyclohexene, mixed dialkylcyclohexadienes, mixed alkyl-(alkylalkylidene)cyclohexenes and 3,7,7-trimethylbicyclo[4.1.0]hept-3-ene.
P-21-0079 1 02/04/2021 CBI (G) Additive in Household consumer products (S) 13-Oxabicyclo[10.1.0]trideca-4,8-diene, (4E)-.
P-21-0080 2 02/10/2021 Allnex USA, Inc (S) Binder for UV Curable Coating Resin (G) Alkanedioic acid, polymers with alkanoic acid-dipentaerythritol reaction products, alkanedioc acid dihydrazide, hydroxy-(hydroxyalkyl)-alkylalkanoic acid, isocyanato-(isocyanatoalkyl)-alkyl substituted carbomonocycle, dialkylalkanediol and polyakylene glycol(hydroxyalkyl)alkyl aklyl ether.
P-21-0081 2 02/11/2021 CBI (G) Additive in Household consumer products (S) 4-Pentenal, 5-cyclohexyl-2,4-dimethyl-, (4E)-.
P-21-0082 1 02/05/2021 CBI (G) Additive in household consumer products (S) 1-Decen-4-yne.
P-21-0083 2 02/10/2021 Allnex, USA Inc (S) UV Curable resin (G) Alkenoic acid, reaction products with pentaerythritol, polymers with diisocyanatoalkane and heteromonocyle homopolymer esters with alkanoic acid-pentaerythritol reaction products.
P-21-0084 1 02/08/2021 CBI (G) Chemical intermediate (G) Carbopolycycle octa-alkene, halo.
P-21-0085 1 02/08/2021 CBI (G) Used as an additive in the manufacture of tires to improve performance (S) 1-Propanethiol, 3-(triethoxysilyl)-, reaction products with polybutadiene.
P-21-0085A 2 02/25/2021 CBI (G) Used as an additive in the manufacture of tires to improve performance (S) 1-Propanethiol, 3-(triethoxysilyl)-, reaction products with polybutadiene.
P-21-0089 3 02/25/2021 CBI (G) Emulsifier (G) Lignin, modified, reaction products with alkylamine by-products, hydrochlorides.
P-21-0093 2 02/19/2021 CBI (G) Antiwear additive for lubricants (G) Phosphonic acid, dimethyl ester, reaction products with alkyl-alkyl-alkanediol and alkanediol.
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity.

Table II—NOCs Approved * From 02/01/2021 to 02/28/2021

Case No. Received date Commencement date If amendment, type of amendment Chemical substance
J-19-0022 02/02/2021 01/08/2021 N (G) Saccharomyces cerevisiae, strain cbi.
P-07-0004 02/09/2021 02/06/2021 N (G) Fatty acids, c16-18 and c18 unsaturated, esters with mixed diols & triols.
P-15-0017 02/04/2021 06/16/2017 N (G) Iron alkylenediaminehydroxy sulfophonic acid.
P-17-0360 02/01/2021 02/01/2021 N (S) 2-Propanol, 1-amino-,compd. with.alpha.-sulfo-.omega.-(octyloxy)poly(oxy-1,2-ethanediyl)(1:1). (S) 2-propanol, 1-amino-,compd. with .alpha.-sulfo-.omega.-(decyloxy)poly(oxy-1,2-ethanediyl)(1:1).
P-17-0364 02/05/2021 01/11/2021 N (G) Dicyloalkyl-alkane-di-isocyanate homopolymer, alkyl alcohol and polyalkyl glycol mono-alkyl-ether-blocked.
P-18-0175 02/16/2021 02/14/2021 N (S) Formaldehyde, polymer with 4-(1,1-dimethylethyl)phenol and phenol, bu ether.
P-19-0081 02/11/2021 02/07/2021 N (G) 2-propenoic acid, ethyl ester, reaction products with o,o-bis(polyalkylalkyl) hydrogen phosphorodithioate, o,o-dialkyl hydrogen phosphorodithioate and propylene oxide.
P-19-0147 02/02/2021 01/29/2021 N (G) Alkoxylated buty alkyl ester.
P-21-0012 02/16/2021 02/05/2021 N (G) Multialkylbicycloalkenyl substituted propanenitrile.
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission.

In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity.

Table III—Test Information Received From 02/01/2021 to 02/28/2021

Case No. Received date Type of test information Chemical substance
P-16-0543 02/23/2021 Exposure Monitoring Report January 2021 (G) Halogenophosphoric acid metal salt.

If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under FOR FURTHER INFORMATION CONTACT to access additional non-CBI information that may be available.

Authority: 15 U.S.C. 2601 et seq.

Dated: March 17, 2021.

Pamela Myrick,

Director, Project Management and Operations Division, Office of Pollution Prevention and Toxics.

[FR Doc. 2021-05927 Filed 3-22-21; 8:45 am]

BILLING CODE 6560-50-P