Certain New Chemicals; Receipt and Status Information

Download PDF
Federal RegisterFeb 25, 2000
65 Fed. Reg. 10086 (Feb. 25, 2000)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2000 to January 14, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the “SUPPLEMENTARY INFORMATION.” To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51941 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Joe Carra, Deputy Director, Office of Pollution Prevention and Toxics (7401), Office of Pollution Prevention and Toxics, Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone numbers: (202) 554-1404 and TDD: (202) 554-0551; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/ . On the Home Page select “Laws and Regulations” and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the “Federal Register” listings at http://www.epa.gov/fedrgstr /.

2. In person. The Agency has established an official record for this action under docket control number OPPTS-51941. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is (202) 260-7099.

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51941 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 260-7093.

3. Electronically. You may submit your comments electronically by e-mail to: “oppt.ncic@epa.gov,” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51941 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under “FOR FURTHER INFORMATION CONTACT.”

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2000 to January 14, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 75 Premanufacture Notices Received From: 1/1/00 to 1/14/00

P-00-0389
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
01/03/00 04/02/00 CBI (G) Coating component (G) Modified polyisocyanate
P-00-0392 01/05/00 04/04/00 Wacker Silicones Corp. (S) Plasters; building adhesive; hydrophobic coatings (S) Neodecanoic acid, ethenyl ester, polymer with ethene and ethenyl acetate*
P-00-0393 01/04/00 04/03/00 Finetex, Inc. (S) Textile fiber lubricant with high thermal stability, dispersant for tilanium doxide, zinc oxide, pigments, etc. plasticizer for selected polymer systems requiring high thermal stability (S) Isostearyl benzoate*
P-00-0394 01/06/00 04/05/00 Johnson Polymer (G) Open, non-dispersive use. (G) Acrylic emulsion polymer
P-00-0395 01/07/00 04/06/00 CBI (S) A radiation curable coating for industrial use (G) Urethane acrylate
P-00-0396 01/10/00 04/09/00 Eastman Chemical company (S) Plastic additive (G) Substituted phthalocyanine dye
P-00-0397 01/07/00 04/06/00 E.I. Du Pont De Nemours and Co. (S) Use or process in enclosed systems; electronic industry cleaning solvent; other precision industry cleaning; paint stripping; metal cleaning and degreasing; ink formulations; adhesives; pigment dispersions; emulsifiable concentrate solvent; wetting agent and/or surfactant; coating agent for polymer emulsion coatings; hydrocarbon extraction; polymer synthesis; wire enamel resin; optics; aerospace; other defense industry; automotive manufacturing and similar (S) 2-piperidinone,1,3-dimethyl-*
P-00-0398 01/07/00 04/06/00 E.I. Du Pont De Nemours and Co. (S) Use or process in enclosed systems; electronic industry cleaning solvent; other precision industry cleaning; paint stripping; metal cleaning and degreasing; ink formulations; adhesives; pigment dispersions; emulsifiable concentrate solvent; wetting agent and/or surfactant; coating agent for polymer emulsion coatings; hydrocarbon extraction; polymer synthesis; wire enamel resin; optics; aerospace; other defense industry; automotive manufacturing and similar (S) 2-piperidinone,1,5-dimethyl-*
P-00-0399 01/10/00 04/09/00 Englehard Corporation (S) A colorant for plastics (G) Disazo yellow
P-00-0400 01/10/00 04/09/00 CBI (G) Dye used in Thermal ink Jet Printer (S) 2,7-naphthalenedisulfonic acid, 6-amino-4-hydroxy-3-[[7-sulfo-4-[(4-sulfophenyl) azo]-1-naphthalenyl]azo]-, compd. with 2,2 1/4,2 1/4 1/4- nitrilotris [ethanol] (1:4) *
P-00-0401 01/10/00 04/09/00 Reichhold, Inc. (S) Pigment dispersion carrier (G) Polyester resin
P-00-0402 01/11/00 04/10/00 CBI (S) Resin for printing inks (offset printing) (S) Fatty acids, C14-18 and C16-18-unsatd., polymers with isophthalic acid and trimethylolpropane*
P-00-0403 01/11/00 04/10/00 CBI (S) Polyurethane raw material (S) Poly[oxy (methyl-1,2-ethanediyl)], α-hydro-omega-hydroxy-, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol*
P-00-0404 01/11/00 04/10/00 CBI (S) Polyurethane raw material (S) Fatty acids, C18-unsatd., dimers, di-me esters, hydrogenated, polymd.
P-00-0405 01/12/00 04/11/00 CBI (G) Processing aid (S) Benzenesufonic acid, bis (1-methylethyl)-, sodium salt*
P-00-0406 01/12/00 04/11/00 CBI (S) Metalworking lubricant on the preparation of wire & cable (G) Calcium fatty acid complex.
P-00-0407 01/12/00 04/11/00 CBI (S) Metalworking lubricant on the preparation of wire & cable (G) Calcium fatty acid complex.
P-00-0408 01/12/00 04/11/00 CBI (S) Metalworking lubricant on the preparation of wire & cable (G) Calcium fatty acid complex.
P-00-0409 01/12/00 04/11/00 CBI (S) Metalworking lubricant on the preparation of wire & cable (G) Calcium fatty acid complex.
P-00-0410 01/12/00 04/11/00 CBI (S) Metalworking lubricant on the preparation of wire & cable (G) Calcium fatty acid complex.
P-00-0411 01/12/00 04/11/00 CBI (S) Metalworking lubricant on the preparation of wire & cable (G) Calcium fatty acid complex.
P-00-0412 01/12/00 04/11/00 CBI (S) Metalworking lubricant in the preparation of wire & cable (G) Calcium fatty acid complex
P-00-0413 01/12/00 04/11/00 CBI (S) Metalworking lubricant in the preparation of wire & cable (G) Calcium fatty acid complex
P-00-0414 01/12/00 04/11/00 CBI (S) Metalworking lubricant in the preparation of wire & cable (G) Calcium fatty acid complex
P-00-0415 01/12/00 04/11/00 CBI (S) Metalworking lubricant in the preparation of wire & cable (G) Calcium fatty acid complex
P-00-0416 01/12/00 04/11/00 CBI (S) Metalworking lubricant in the preparation of wire & cable (G) Calcium fatty acid complex
P-00-0417 01/12/00 04/11/00 CBI (S) Metalworking lubricant in the preparation of wire & cable (G) Calcium fatty acid complex
P-00-0418 01/18/00 04/17/00 CIBA Specialty Chemicals Corp. (S) Hardener for protective epoxy coatings for metal surfaces; hardener for epoxy coatings for flooring or walls (G) Alkyl amides, from tetraethylenepentamine
P-00-0419 01/14/00 04/13/00 CBI (G) Copying material for printers and copiers (G) Polycarbonate polyester
P-00-0420 01/18/00 04/17/00 CBI (G) Colorant (G) Aromatic compound derivative
P-00-0421 01/18/00 04/17/00 CBI (G) Pigment dispersant (G) High molecular polymer with amino group
P-00-0422 01/18/00 04/17/00 CBI (G) Coating component (G) Non-volatile emulsion acrylic polymer
P-00-0423 01/18/00 04/17/00 King Industries, Inc. (S) Corrosion inhibitor for industrial lubricants; corrosion inhibitor for rust preventive coatings (G) Dinonylnaphthalenesulfonic acid compound with amine
P-00-0424 01/18/00 04/17/00 King Industries, Inc. (S) Corrosion inhibitor for industrial lubricants; corrosion inhibitor for rust preventive coatings (G) Dinonylnaphthalenesulfonic acid compound with amine
P-00-0425 01/19/00 04/18/00 Henkel Corp., Chemicals Group (G) Dispersing agent (S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with 2,2 1/4 -[1,4-butanediylbis(oxymethylene)] bis [oxirane], dihydro-3-(tetrapropenyl)- 2,5-furandione and α-hydro-omega-hydroxypoly (oxy-1,2-ethanediyl), compd. with 2-(dimethylamino) ehthanol*
P-00-0426 01/18/00 04/17/00 DMC-2, L.P. (S) Flux paste used for brazing (G) Inorganic acid reaction product, with alkaline flouride metal salts
P-00-0427 01/11/00 04/10/00 CBI (G) Semiconductor coatings component (G) Hydrolyzed alkoxysilane
P-00-0428 01/11/00 04/10/00 CBI (G) Semiconductor coatings component (G) Hydrolyzed alkoxysilane
P-00-0429 01/18/00 04/17/00 Dyneon LLC (S) Fluoroelastomer for making molded parts (G) Fluoroelastomer
P-00-0430 01/18/00 04/17/00 CBI (G) Softener (G) Quaternized ammonium salt
P-00-0431 01/19/00 04/18/00 Eastman Kodak Company (G) Contained use in an article (G) Substituted alicyclic alkenyl benz[e]indolium salt
P-00-0432 01/19/00 04/18/00 Henkel Adhesives - A Henkel Corporation Group (S) Hot melt adhesive designed for molding/potting.; general hot melt adhesive (S) Fatty acids, C18-unsatd., dimers, polymers with ethylenediamine, piperazine, polypropylene glycol diamine and sebacic acid*
P-00-0433 01/18/00 04/17/00 CBI (G) Pigment dispersant (G) Amine neutralized phosphated polyester
P-00-0434 01/24/00 04/23/00 CBI (S) Grease thickner (G) Alkyl substituted urea
P-00-0435 01/24/00 04/23/00 CBI (S) Chemical intermediate (G) Aminoalkyl polydimethylsiloxane
P-00-0436 01/21/00 04/20/00 CBI (G) Adhesive for Flexible Substrates (G) Polyester polyurethane
P-00-0437 01/21/00 04/20/00 CBI (G) Adhesive for Flexible Substrates (G) Polyester polyurethane
P-00-0438 01/21/00 04/20/00 CIBA Specialty Chemicals Corporation (S) Hardener for epoxy dielectric insulation hardener for pipe bonding (S) Oxiranemethanamine, n,n 1/4 -(methylenedi-4,1-phenylene) bis [n-(oxiranylmethyl)-, polymer with 4,4 1/4 -methylenebis [2-methylcyclohexanamine]*
P-00-0439 01/21/00 04/20/00 CBI (G) Oilfield polymer (G) Polymer of acrylamido alkyl propane sulfonic acid ammonium salt and two acrylic monomers
P-00-0440 01/21/00 04/20/00 CBI (G) Open non-dispersive (polyester resin) (G) Polyester resin
P-00-0441 01/24/00 04/23/00 CBI (G) Oil field additive (G) Alkyl glyceryl ether sulphonate
P-00-0442 01/24/00 04/23/00 CBI (G) Fertilizer (G) Zinc ammonium phosphate
P-00-0443 01/24/00 04/23/00 The Dow Chemical Company (G) Fuel additive and chemical intermediate (G) Alkaryl polyoxyalkylene derivative
P-00-0444 01/24/00 04/23/00 The Dow Chemical Company (G) Fuel additive and chemical intermediate (G) Alkaryl polyoxyalkylene derivative
P-00-0445 01/24/00 04/23/00 CBI (G) Open, non-dispersive use;polyurethane adhesives & sealants (G) Polyester polyol
P-00-0446 01/24/00 04/23/00 CBI (G) Open, non-dispersive use;polyurethane adhesives & sealants (G) Polyester polyol
P-00-0447 01/24/00 04/23/00 CBI (G) Open, non-dispersive use;polyurethane adhesives & sealants (G) Polyester polyol
P-00-0448 01/24/00 04/23/00 CBI (G) Processing aid (G) Titanium-aluminum complex on amorphous silica
P-00-0449 01/24/00 04/23/00 CBI (G) Processing aid (G) Titanium-aluminum complex on amorphous silica
P-00-0450 01/24/00 04/23/00 CBI (G) Processing aid (G) Titanium-aluminum complex on amorphous silica
P-00-0451 01/24/00 04/23/00 CBI (G) Processing aid (G) Titanium-aluminum complex on amorphous silica
P-00-0452 01/27/00 04/26/00 CBI (S) Vat dye doe cellulosic fibers (S) 3 h-indol-3-one, 5-bomo-2-(5-bromo-1,3-dihydro-3-oxo-2 h-indol-2-ylidene)-, 1,2-dihydro*
P-00-0453 01/27/00 04/26/00 Ashland Inc. (G) Open, non-dispersive use in molding operations (G) Unsaturated polyester
P-00-0454 01/28/00 04/27/00 3M (S) Adhesive (G) Acrylate copolymer
P-00-0455 01/28/00 04/27/00 CBI (G) Contained use (G) Substituted pyridimium bromides
P-00-0456 02/01/00 05/01/00 Dyneon llc (S) Fluoroelastomer for molded parts (G) Fluoroelastomer
P-00-0457 01/28/00 04/27/00 CBI (G) Polymeric admixture for concrete (G) Modified polyethercarboxylate
P-00-0458 01/28/00 04/27/00 CBI (G) Polymeric admixture for concrete (G) Modified polyethercarboxylate
P-00-0459 01/28/00 04/27/00 CBI (G) Polymeric admixture for concrete (G) Modified polyethercarboxylate
P-00-0460 01/28/00 04/27/00 CBI (G) Polymeric admixture for concrete (G) Modified polyethercarboxylate
P-00-0461 01/28/00 04/27/00 CBI (G) Polymeric admixture for concrete (G) Modified polyethercarboxylate
P-00-0462 01/28/00 04/27/00 CBI (G) Polymeric admixture for concrete (G) Modified polyethercarboxylate
P-00-0463 02/01/00 05/01/00 CBI (G) Component of coating with open use (G) Metal salt
P-00-0464 02/01/00 05/01/00 CBI (G) Component of coating with open use (G) Metal salt
P-00-0465 02/01/00 05/01/00 CBI (S) Moisture curing adhesive for book assembly; moisture curing adhesive for wood laminating (G) Isocyanate terminated urethane polymer

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 1 Test Marketing Exemption Notice Received From: 1/1/00 to 1/14/00

T-00-0001
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
01/07/00 02/21/00 CBI (G) Consumer product ingredient (G) Salt of substituted aliphatic benzenesulfonic acid

In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 43 Notices of Commencement From: 1/1/00 to 1/14/00

P-00-0008
Case No. Received Date Commencement/Import Date Chemical
01/21/00 01/07/00 (S) 2-propenoic acid, polymer with 1,3-butadiene, n-(hydroxymethyl)-2-propenamide and 2-propenenitrile*
P-00-0055 01/18/00 01/13/00 (G) Polyisobutylene oxime
P-00-0056 01/18/00 01/13/00 (G) Polyisobutylene oxime
P-94-0961 01/19/00 12/22/99 (G) Methylene diphenylene diisocyante (mdi) prepolymer
P-95-1214 01/03/00 12/02/99 (G) Polyether/polyester/aromatic polyurethane
P-96-0628 01/18/00 12/22/99 (G) Neutralized polyacrylic resin
P-96-1132 01/18/00 12/21/99 (G) Vinyl modified nonionic surfactant
P-98-1045 01/10/00 01/04/00 (S) Oil, canola, polymerized, oxidized*
P-98-1060 01/24/00 12/20/99 (G) Mixed vegetable oil fatty acids
P-98-1154 01/19/00 12/28/99 (G) Reaction product of ethoxylated fatty amines and ammoniummolybate
P-99-0166 01/18/00 12/20/99 (G) Acrylate functional polyester
P-99-0422 01/07/00 12/10/99 (G) (polyalkoxy, polyester) modified acrylate, reaction product with poly (cyanoalkane-alkylene glycol)
P-99-0655 01/27/00 12/23/99 (G) 2-anthracenesulfonic acid, 4-[[4-(acetylamino) phenyl]amino]-1-amino-9,10-dihydro-9,10-dioxo-, compd. with alkanol amine-alkylene oxide polymer
P-99-0751 01/24/00 01/13/00 (G) Polyester tetrafunctional acrylate
P-99-0764 01/24/00 01/10/00 (G) Ester modified melamine acrylate oligomer
P-99-0818 01/10/00 11/29/99 (G) Alkylphenol
P-99-0830 01/18/00 12/27/99 (G) Synthetic indigo solution
P-99-0890 01/27/00 12/28/99 (G) Alkanolamine carboxylate salts
P-99-0891 01/27/00 12/28/99 (G) Alkanolamine carboxylate salts
P-99-0922 01/18/00 12/23/99 (G) Polyacrylic resin
P-99-0936 01/04/00 12/17/99 (S) Fatty acids, C8-10 , reaction products with epoxidized soybean oil, ethoxylated*
P-99-1041 01/12/00 12/28/99 (G) Pyrazolotriazolyl substituted acetamide
P-99-1046 01/10/00 01/04/00 (S) Octadecanoic acid, 12-(benzoyloxy)-, 2-ethylhexyl ester (9ci) *
P-99-1051 01/03/00 12/16/99 (G) Blocked polyurethane dispersion
P-99-1070 01/10/00 12/16/99 (G) Acrylic polymer on the basis of methyl methacrylate and n-butyl methacrylate
P-99-1095 01/06/00 12/14/99 (G) Perfluoropolyether derivative
P-99-1101 01/19/00 01/10/00 (G) Organo silane ester
P-99-1109 01/24/00 01/12/00 (S) Alcohols, C12-18 , ethers with polyethylene glycol mono-bu ether*
P-99-1152 01/10/00 12/23/99 (G) Substituted aminophenol
P-99-1153 01/10/00 12/19/99 (G) Substituted aminophenol
P-99-1154 01/19/00 01/08/00 (G) Substituted hexanoic acids esters
P-99-1156 01/19/00 01/10/00 (G) Substituted oxazolidinedione
P-99-1181 01/18/00 12/29/99 (S) Morpholine, sulfate (2:1) *
P-99-1237 01/27/00 01/05/00 (G) Arylsulfonic acid, 2-[[6-[[4-chloro-6-[[4-[[2-(substituted]phenyl]amino]-1,3,5-triazin-2-yl]amino]-1-hydroxy-3-sulfo-2-naphthalenyl]azo]-, sodium salt
P-99-1249 01/17/00 12/14/99 (G) Polyester acrylate
P-99-1251 01/10/00 12/31/99 (G) Tin-ii-carboxylate
P-99-1296 01/12/00 12/26/99 (G) Substituted phenyl butanoic acid
P-99-1299 01/14/00 01/11/00 (G) Amino epoxy silane
P-99-1300 01/12/00 12/28/99 (G) Substituted phenyl butanoyl chloride
P-99-1316 01/19/00 12/17/99 (G) Rosin modified phenolic resin
P-99-1365 01/13/00 01/10/00 (G) Aromatic polyurethane
P-99-1370 01/17/00 01/14/00 (G) Aromatic polyester polyurethane
P-99-1387 01/18/00 01/04/00 (G) Substituted aliphatic carboxylic acid

List of Subjects

  • Environmental protection
  • Chemicals
  • Premanufacturer notices

Dated: February 16, 2000.

Deborah A. Williams,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. 00-4420 Filed 2-24-00; 8:45 am]

BILLING CODE 6560-50-F