Certain New Chemicals; Receipt and Status Information

Download PDF
Federal RegisterDec 12, 2000
65 Fed. Reg. 77627 (Dec. 12, 2000)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 30, 2000 to November 10, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51959 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Director, Office of Program Management and Evaluation, Office of Pollution Prevention and Toxics (7401), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/. On the Home Page select “Laws and Regulations,” “Regulations and Proposed Rules,” and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the Federal Register listings at http://www.epa.gov/fedrgstr/.

2. In person. The Agency has established an official record for this action under docket control number OPPTS-51959. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, any test data submitted by the manufacturer/importer and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is (202) 260-7099.

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51959 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 260-7093.

3. Electronically. You may submit your comments electronically by e-mail to: “oppt.ncic@epa.gov,” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51959 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT.”

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 30, 2000 to November 10, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

Table I. 30 Premanufacture Notices Received From: 10/30/00 to 11/10/00

P-01-0078
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
10/30/00 01/28/01 CBI (G) Glass fiber coating (G) Urethane acrylate oligomer
P-01-0079 10/30/00 01/28/01 CIBA Specialty Chem.Corp., Colors Division (G) Textile dye (G) Benzoic acid, 3,5-diamino-2-[(1,5-disulfo-2-naphthalenyl)azo]-4,6-bis[[4-(substituted)phenyl]azo]-, sodium salt
P-01-0080 10/31/00 01/29/01 Lambent Technologies Corp. (S) Wetting agent - coatings (S) Poly(oxy-1,2-ethanediyl), α-(2-carboxybenzoyl)-omega-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy]disiloxanyl]propoxy]-, potassium salt
P-01-0081 10/31/00 01/29/01 Lambent Technologies Corp. (S) Wetting agent - coatings (S) Poly(oxy-1,2-ethanediyl), α-(2-carboxybenzoyl)-omega-(2-propenyloxy)-, potassium salt
P-01-0082 10/31/00 01/29/01 Lambent Technologies Corp. (S) Wetting agent - coatings (S) Poly(oxy-1,2-ethanediyl), α-(2-carboxybenzoyl)-omega-[(2-carboxybenzoyl)oxy]-, dipotassium salt
P-01-0083 10/31/00 01/29/01 CBI (G) Coating component (G) Tris carbamoyl triazine
P-01-0084 11/01/00 01/30/01 CBI (S) Plasticizer for plastics (G) 1,2,4,5-benzenetetracarboxylic acid, tetrakis esters with monohydric alcohols
P-01-0085 11/02/00 01/31/01 CBI (G) Component of adhesives, inks, and clear coatings (G) Mono esters from 2-propenoic acid
P-01-0086 11/02/00 01/31/01 Huntsman Petrochemical Corporation (G) Chemical intermediate - destructive use (G) Alkanolamine
P-01-0087 11/02/00 01/31/01 Atofina Chemicals, Inc. (G) Free radical initiator for polymers (G) Polyether poly-t-butyl peroxycarbonate
P-01-0088 11/02/00 01/31/01 Rhodia, Inc. (S) Component in surfactant/foaming agent for leather processing (S) Sulfuric acid, mono-c9-11-alkyl esters, sodium salts
P-01-0089 11/03/00 02/01/01 CBI (G) Acrylic pressure sensitive adhesive (G) Vinyl pyrrolidone-acrylate copolymer
P-01-0090 11/03/00 02/01/01 Dainippon ink and Chemicals, Inc. (S) Binder for water-base coatings (G) Polysiloxane-acrylic hybrid resin
P-01-0091 11/03/00 02/01/01 Dainippon ink and Chemicals, Inc. (S) Binder for water-base coatings (G) Polysiloxane-acrylic hybrid resin
P-01-0092 11/06/00 02/04/01 Degussa-huls Corporation (S) Sizing component for fiber glass (S) 2-propanol, reaction products with (3-chloropropyl)trimethoxysilane and diethylenetriamine-ethylenimine polymer
P-01-0093 11/06/00 02/04/01 Rhodia, Inc./formerly albright & wilson (S) Viscosity index improver for hydraulic and gear oils;viscosity index improvers for shock absorber fluids and other special hydraulics;pour point depressants for hydraulic and gear oils (S) 2-propenoic acid, 2-methyl-, c6-18-alkyl esters, polymers with me methacrylate
P-01-0094 11/07/00 02/05/01 CBI (G) Resin coating (G) Polyester resin
P-01-0095 11/09/00 02/07/01 3M Company (G) Stain resistant coating (G) Aliphatic urethane
P-01-0096 11/09/00 02/07/01 CBI (G) Open.non dispersive use (G) Modified acrylate polymer
P-01-0097 11/09/00 02/07/01 Sybron Chemical Inc. (S) A crosslinker for waterborne paper coastings; a crosslinker for waterborne inks; a crosslinker for leather finishes; a crosslinker for waterborne wood coatings (G) Polyaziridinyl ester
P-01-0103 11/06/00 02/04/01 Solutia Inc. (S) Binder for industrial printing inks (G) Phenolic resin modified rosin resin

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

Table II. 4 Test Marketing Exemption Notices Received From: 10/30/00 to 11/10/00

T-01-0002
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
11/03/00 12/18/00 Ilford Imaging USA (S) Dye for inkjet printer ink (G) Copper complex with sulfonated azo dye, sodium salt
T-01-0003 11/09/00 12/24/00 Bystronic Inc. (S) Photo-curing overprint varnish for paper, cardboard and plastic films roller coating (G) Acrylic acid ester amino addition product
T-01-0004 11/09/00 12/24/00 Bystronic Inc. (S) Photo-curing overprint varnish for paper, cardboard and plastic films roller coating (G) Acrylic acid ester amino addition product
T-01-0005 11/09/00 12/24/00 Bystronic Inc. (S) Photo-curing overprint varnish for paper, cardboard and plastic films roller coating (G) Acrylic acid ester amino addition product

In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

Table III. 38 Notices of Commencement From: 10/30/00 to 11/10/00

P-00-0080
Case No. Received Date Commencement/Import Date Chemical
11/09/00 10/13/00 (G) Polyphosphoric acids, compounds with melamine
P-00-0084 11/07/00 10/23/00 (G) Dimethyl ester of 2-2 oxo-1-(1,4-dihydro-2,3-dioxo-6-methoxy-quinoxaline-7-yl carbamoyl-propylazo)terephthalic acid
P-00-0534 11/09/00 10/12/00 (G) Copolymer of alkyl acrylates
P-00-0543 11/08/00 10/12/00 (S) Petanoic acid, 5,5′-dioxybis[5-oxo-]
P-00-0631 11/07/00 10/16/00 (G) Alkyl arylaminophenylcarboxylate
P-00-0657 11/03/00 10/06/00 (G) Styrene acrylic emulsion polymer
P-00-0658 11/03/00 10/06/00 (G) Styrene acrylic emulsion polymer
P-00-0659 11/03/00 10/06/00 (G) Styrene acrylic emulsion polymer
P-00-0660 11/03/00 10/06/00 (G) Styrene acrylic emulsion polymer
P-00-0732 11/08/00 10/09/00 (G) Silane
P-00-0765 11/01/00 10/04/00 (G) Alkylaryl polyether
P-00-0787 11/07/00 10/24/00 (S) Alkanes, c10-24-branched
P-00-0788 11/07/00 10/11/10 (S) Alkanes, c10-24
P-00-0838 11/03/00 10/17/00 (G) Substituted alkylsulfonamide
P-00-0871 10/30/00 10/07/00 (G) Reaction product of halogenated arylammonium salt, alkylaluminum and substituted carbomonocyclic metal compound
P-00-0880 11/06/00 10/25/00 (S) 1,2,3 propanetricarboxylic acid, 2-hydroxy-, bismuth(3+) salt (1:1)
P-00-0884 10/30/00 10/19/00 (G) Polyester polyether isocyanate polymer
P-00-0886 10/30/00 10/16/00 (G) Polyester polyether isocyanate polymer
P-00-0921 10/30/00 10/19/00 (G) Silane treated silica
P-00-0937 11/03/00 10/25/00 (G) Poly[oxy(methyl-1,2-ethanediyl)], alpha-hydro-omega-hydroxy-, polymer with 1,1'-methylenebis[4-isocyanatocyclohexane], and an aliphatic alcohol
P-00-0940 11/03/00 10/18/00 (G) Polyamide resin
P-00-0944 10/30/00 10/02/00 (G) Aqueous polyurethane
P-00-0994 11/01/00 10/13/00 (G) Amino substituted aromatic acid derivative
P-00-1004 11/08/00 10/16/00 (G) Polyester resin
P-00-1007 11/03/00 10/17/00 (G) Colored aliphatic urethane
P-00-1008 11/09/00 10/13/00 (G) Multifunctional polycarbodiimide
P-00-1049 11/08/00 10/19/00 (G) Polyester resin
P-00-1066 11/09/00 11/02/00 (G) Methacrylic acid copolymer
P-92-0539 11/07/00 10/27/00 (S) Polymer of fatty acids, c18-unsatd., dimers; ethylenediamine; stearic acid; 1,5-pentanediamine, 2-methyl-;piperazine; polyoxypropylenediamines; sebacic acid
P-93-0939 10/30/00 10/03/00 (G) Cyclic - aliphatic polyester
P-99-0377 10/30/00 10/25/00 (G) Halogenated alkyldiene
P-99-0791 11/06/00 10/17/00 (G) Polyester polyol
P-99-0792 11/06/00 10/17/00 (G) Polyester polyol
P-99-0793 11/06/00 10/17/00 (G) Polyester polyol
P-99-0848 11/07/00 10/30/00 (G) Alkenyl carboxylate, metal salt
P-99-1064 11/08/00 10/25/00 (S) Cellulose, acetate hydrogen (2 z)-2-butenedioate propanoate
P-99-1311 10/30/00 10/12/00 (G) Polyol
P-99-1379 11/06/00 08/30/00 (G) Polydimethyldiphenylsiloxane resin

List of Subjects

  • Environmental protection
  • Chemicals
  • Premanufacturer notices

Dated: November 29, 2000.

Deborah A. Williams,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. 00-31620 Filed 12-11-00; 8:45 am]

BILLING CODE 6560-50-S