Certain New Chemicals; Receipt and Status Information

Download PDF
Federal RegisterSep 30, 2004
69 Fed. Reg. 58437 (Sep. 30, 2004)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 9, 2004 to September 10, 2004, consists of the PMNs, and TME both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2004-0116 and the specific PMN number or TME number, must be received on or before November 1, 2004.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2004-0116. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/fedrgstr/ .

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/ , and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2004-0116. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2004-0116 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-20040116 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 9, 2004 to September 10, 2004, consists of the PMNs and TME both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

This status report identifies the PMNs and TME both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 97 Premanufacture Notices Received From: 08/09/04 to 09/10/04

P-04-0791
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
08/09/04 11/06/04 CIBA Specialty Chemicals Corporation (S) Wetting agent for inorganic fillers and pigments in unsaturated polyesters (G) Polyether phosphonate
P-04-0792 08/09/04 11/06/04 Eastman Kodak Company (G) Chemical intermediate, destructive use (G) Halo substituted hydroxy nitrophenyl amide
P-04-0793 08/09/04 11/06/04 CBI (G) Component of a mixture for highly dispersive applications. (G) Essential oil
P-04-0795 08/10/04 11/07/04 CBI (G) Moisture curing polyurethane adhesive (G) Isocyanate terminated urethane polymer
P-04-0796 08/10/04 11/07/04 CBI (G) Synthetic lubricant base stock (G) Polyol ester
P-04-0797 08/10/04 11/07/04 CBI (G) Open non-dispersive (coatings resin) (G) Poly acrylic dispersion peroxide initiated poly acrylic esters with amine salt.
P-04-0798 08/10/04 11/07/04 CBI (G) Open non-dispersive (crosslinker) (G) Hydrogenated mdi based polyurethane prepolymer blocked with diethylmalonate
P-04-0799 08/10/04 11/07/04 CBI (G) Open non-dispersive (reactant diluent) (G) Glycidyl derivatives with adipic acid.
P-04-0800 08/10/04 11/07/04 Cytec Industries Inc. (G) Antiscalant (G) Modified styrene polymer
P-04-0801 08/10/04 11/07/04 CBI (G) Resin solution additive (G) Aluminum alkoxide complex
P-04-0802 08/10/04 11/07/04 CBI (G) Moisture curing polyurethane adhesive (G) Isocyanate terminated urethane polymer
P-04-0803 08/12/04 11/09/04 E.I. Du pont De Nemours and Company Inc. (G) Molding resin (G) Aromatic and aliphatic polyamide
P-04-0804 08/12/04 11/09/04 E.I. Du pont De Nemours and Company Inc. (G) Intermediate raw material for polymer production (G) Salt of amine with aromatic acid
P-04-0805 08/12/04 11/09/04 CBI (G) Cleaner additive (G) Homopolymer of amino-substituted methacrylic acid
P-04-0806 08/13/04 11/10/04 CBI (G) Friction modifier lubricant additive (G) Phosphonic acid, alkyl-, alkyl ester
P-04-0807 08/13/04 11/10/04 Solutia Inc (S) Scale inhibitor for industrial water treatment; scale inhibitor for oil field water treatment (S) Inulin, carboxymethyl ether, sodium salt
P-04-0808 08/16/04 11/13/04 CBI (G) High temperature resistant machine seals (G) Aromatic thermoplastic polyurethane
P-04-0809 08/16/04 11/13/04 CBI (G) Open, non-dispersive use. (G) Polyester urethane
P-04-0810 08/16/04 11/13/04 Clariant LSM (America) Inc. (S) Insecticide intermediate (G) Alkylated aromatic isothiocyanate
P-04-0811 08/16/04 11/13/04 CBI (G) Industrial coating (S) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-hydro-.omega.-hydroxy-, polymer with 2,4-diisocyanato-1-methylbenzene, 2-hydroxyethyl acrylate-blocked
P-04-0812 08/16/04 11/13/04 Gelest, Inc. (S) Coversion to corresponding methyl ester; research (S) Silane, dichloromethyl[1-(methylphenyl)ethyl]-
P-04-0813 08/16/04 11/13/04 Gelest, Inc. (S) Protective and life extending fluid for underground power cables; silicone polymers; surface treatment (S) Silane, dimethoxymethyl[1-(methylphenyl)ethyl]-
P-04-0814 08/18/04 11/15/04 Global Matrechs, Inc. (G) Nonisocyanate polyurethane (G) Hybrid nonisocyanate polyurethane
P-04-0815 08/17/04 11/14/04 Johnson Polymer, LLC (G) Polymeric coating vehicle (G) Styrene acrylic copolymer
P-04-0816 08/17/04 11/14/04 CBI (G) Highly dispersive use (G) Disubstituted furanone
P-04-0817 08/19/04 11/16/04 CBI (G) Component of mixture for highly dispersive applications. (G) Trimethyl acyclic alkenones
P-04-0818 08/19/04 11/16/04 CBI (G) Resin coating (G) Urethane acrylate
P-04-0819 08/19/04 11/16/04 CBI (S) Resin modifier for low voc coatings (G) Oil / phenolic modified resin
P-04-0820 08/18/04 11/15/04 CBI (G) Water reducer in concrete (G) Partly esterified and amidated poly (methacrylic acid) in water
P-04-0821 08/19/04 11/16/04 CBI (S) Polymer for use in electrodeposition coatings (G) Amine functional epoxy resin salted with an organic acid
P-04-0822 08/19/04 11/16/04 CBI (S) Polymer for use in electrodeposition coatings (G) Amine functional epoxy resin salted with an organic acid
P-04-0823 08/19/04 11/16/04 CBI (S) Polymer for use in electrodeposition coatings (G) Amine functional epoxy resin salted with an organic acid
P-04-0824 08/19/04 11/16/04 CBI (S) Polymer for use in electrodeposition coatings (G) Amine functional epoxy resin salted with an organic acid
P-04-0825 08/19/04 11/16/04 CBI (S) Polymer for use in electrodeposition coatings (G) Amine functional epoxy resin salted with an organic acid
P-04-0826 08/19/04 11/16/04 CBI (S) Polymer for use in electrodeposition coatings (G) Amine functional epoxy resin salted with an organic acid
P-04-0827 08/19/04 11/16/04 CBI (G) Paint and coating additive, open, non-dispersive use (G) Diimidazo(substituted)triphenodioxazine-(substituted)dione, (substituted)dichloro, (substituted)diethyl, (substituted)tetrahydro
P-04-0828 08/19/04 11/16/04 CBI (G) Paint and coating additive, open, non-dispersive use (G) Diimidazo(substituted)triphenodioxazine-(substituted)dione, (substituted)dichloro, (substituted)tetrahydro, (substituted)dimethyl
P-04-0829 08/19/04 11/16/04 CBI (G) Paint and coating additive, open, non-dispersive use (G) Diimidazo(substituted)triphenodioxazine-(substituted)dione, (substituted)dichloro, (substituted)ethyl, (substituted)tetrahydro, (substituted)methyl
P-04-0830 08/20/04 11/17/04 CBI (G) Reinforcing filler for rubber products (G) Alkoxysilane modified silica
P-04-0831 08/24/04 11/21/04 CBI (G) Coating material (G) Aliphatic soluble acrylic polymer on the basis of isobutyl methacrylate
P-04-0832 08/24/04 11/21/04 Bedoukian Research, Inc. (S) Fragragance uses as per federal food drug cosmetic act; flavor uses as per federal food drug cosmetic act; fragrance uses; scented papers, detergents, candles, etc. (S) Bicyclo[2.2.1]heptan-2-ol, 2-ethyl-1,3,3-trimethyl-
P-04-0833 08/24/04 11/21/04 CBI (S) Component of inks (G) Alkyd resin
P-04-0834 08/24/04 11/21/04 Arch Chemicals, Inc. (S) Used as an ingredient in 2-component polyurethane coatings (G) Hdi biuret, hydroxyethyl methacrylate prepolymer
P-04-0835 08/24/04 11/21/04 CBI (G) Electronics filler (G) Functionalized collodial silica
P-04-0836 08/25/04 11/22/04 CIBA Specialty Chemicals Corporation, Textile Effects (S) Exhaust dyeing of nylon fibers (G) Substituted naphthalenesulfonic acid substituted azo phenyl amino triazin amino substituted phenyl compound
P-04-0837 08/26/04 11/23/04 CBI (G) Open, non-dispersive (resin) (G) Blocked aliphatic polyurethane resin
P-04-0838 08/26/04 11/23/04 CBI (G) Insulation sizing (G) Copolymer of acrylic acid and styrene
P-04-0839 08/26/04 11/23/04 CBI (G) Insulation sizing (G) Copolymer of acrylic acid and maleic acid
P-04-0840 08/26/04 11/23/04 CBI (G) Insulation sizing (G) Copolymer of maleic acid and styrene
P-04-0841 08/26/04 11/23/04 CBI (G) Insulation sizing (G) Copolymer of maleic acid and styrene
P-04-0842 08/26/04 11/23/04 CBI (G) Insulation sizing (G) Copolymer of maleic acid and styrene
P-04-0843 08/26/04 11/23/04 CBI (G) Insulation sizing (G) Copolymer of acrylic acid and styrene
P-04-0845 08/27/04 11/24/04 DIC International (USA), Inc. (G) Polyester resin for coatings (G) Alkenoic acid, polymer with alkyl methacrylate, alkenylbenzene, hydroxy alkyl methacrylate, poly (e-caprolactone) ester with hydroxy ester acrylate, peroxide-initiated.
P-04-0846 08/26/04 11/23/04 CBI (G) Oil additive (G) Polymer of vinyl heterocycles
P-04-0847 08/27/04 11/24/04 CBI (G) Open non-dispersive (emulsion for leather treatment) (G) Polyester-modified siloxanes and silicones
P-04-0848 08/27/04 11/24/04 CBI (G) Petroleum additive (G) Metal phenate/sulfonate complex
P-04-0849 08/27/04 11/24/04 CBI (G) Petroleum additive (G) Metal phenate/sulfonate/salicylate complex
P-04-0850 08/27/04 11/24/04 CBI (G) High temperature resistant machine seals (G) Aromatic thermoplastic polyurethane
P-04-0851 08/27/04 11/24/04 CBI (G) Open non-dispersive (polyurethane) (G) Ionically-modified aliphatic polyurethane - polyurea resin.
P-04-0852 08/30/04 11/27/04 CBI (G) Resin coating (G) Urethane acrylate
P-04-0853 08/31/04 11/28/04 CBI (G) Open, nondispersive use; pigment additive (G) Aluminum salt of a quinacridone derivative
P-04-0854 08/31/04 11/28/04 CBI (G) Intermediate (G) Alkaryl sulfonic acid
P-04-0855 08/31/04 11/28/04 CBI (G) Intermediate (G) Alkaryl sulfonic acid
P-04-0856 08/31/04 11/28/04 CBI (G) Intermediate (G) Alkaryl sulfonic acid
P-04-0857 08/31/04 11/28/04 CBI (G) Intermediate (G) Alkaryl sulfonic acid
P-04-0858 08/31/04 11/28/04 CBI (G) Intermediate (G) Alkaryl sulfonic acid
P-04-0859 08/31/04 11/28/04 CBI (G) Intermediate (G) Benzene alkylate
P-04-0860 08/31/04 11/28/04 CBI (G) Intermediate (G) Benzene alkylate
P-04-0861 08/31/04 11/28/04 CBI (G) Intermediate (G) Benzene alkylate
P-04-0862 08/31/04 11/28/04 CBI (G) Intermediate (G) Benzene alkylate
P-04-0863 08/31/04 11/28/04 CBI (G) Intermediate (G) Benzene alkylate
P-04-0864 08/31/04 11/28/04 Para-Chem (G) Building materials (G) Styrene,methyl methacrylate,butyl acrylate copolymer
P-04-0865 08/30/04 11/27/04 Virotec USA Inc. (S) A slurry for reducing acidity and removing heavy metals in contaminated soils and water; a powder for reducing acidity and removing heavy metals in contaminated soils and water; a pellet for reducing acidity and removing heavy metals in contaminated soil and water (S) Aluminum oxide (a1203), manufacturing. residues, red mud, neutralized, calcium and magnesium-containing
P-04-0866 08/31/04 11/28/04 CBI (G) Lubricant additive (G) Alkaryl sulfonic acid, metal salts
P-04-0867 08/31/04 11/28/04 CBI (G) Lubricant additive (G) Alkaryl sulfonic acid, metal salts
P-04-0868 08/31/04 11/28/04 CBI (G) Lubricant additive (G) Alkaryl sulfonic acid, metal salts
P-04-0869 08/31/04 11/28/04 CBI (G) Lubricant additive (G) Alkaryl sulfonic acid, metal salts
P-04-0870 08/31/04 11/28/04 CBI (G) Lubricant additive (G) Alkaryl sulfonic acid, metal salts
P-04-0871 08/31/04 11/28/04 DIC International (USA) , Inc. (G) Alkyd resin for coatings (G) Fatty acids, vegetable oil, polymers with aromatic carboxylic acid, alkanediol, alkanetriol, vegetable oil, tetra hydroxy alkane and carboxylic acid anhydride.
P-04-0872 09/01/04 11/29/04 CBI (G) Open non-dispersive (footware additive) (G) Aromatic polyester polyurethane prepolymer based on mdi
P-04-0873 09/01/04 11/29/04 CBI (G) Coating material (G) Acrylic polymer on the basis of isobutyl methacrylate
P-04-0874 09/01/04 11/29/04 CBI (G) Coating material (G) Acrylic polymer on the basis of methacrylates
P-04-0875 09/01/04 11/29/04 CBI (G) Open non-dispersive (G) Namox niobium ammonium oxalate
P-04-0876 08/30/04 11/27/04 Virotec USA Inc. (S) Bauxite residue/red mud is the raw material for the production of bauxsol (tm) product.; (see associated final product pmn) 100% of the red mud diverted is converted to bauxsol (tm). (S) Aluminum oxide (al2o3), manufacturing residue, red mud, neutralized, calcium and magnesium-containing
P-04-0877 09/02/04 11/30/04 CBI (G) Conductive agent (G) Substituted ppvs (poly-p-phenylen-vinylens)
P-04-0878 09/03/04 12/01/04 Mankiewicz coatings L.L.C. (G) Resin for coatings. (G) Hydroxyl-terminated; aliphatic polycarbonate
P-04-0879 09/03/04 12/01/04 CBI (G) Primary usage: open, non-dispersive use; potential secondary uses: dispersive use (G) petroleum distillated
P-04-0880 09/03/04 12/01/04 CBI (G) Additive of ink for inkjet printer (G) Carbomonocyclic carboxylic salt
P-04-0881 09/07/04 12/05/04 CBI (S) Textile wet processing, surface treatment agent; homecare clothing softener for detergent (G) Quaternary amino modified silicone-polyether copolymer
P-04-0882 09/07/04 12/05/04 CBI (S) Textile wet processing, surface treatment agent; homecare clothing softener for detergent (G) Quaternary amino modified silicone-polyether copolymer
P-04-0883 09/07/04 12/05/04 CBI (S) Surface treatment additive in textile wet processing; clothing softener for detergent (G) Quaternary amino modified silicone-polyether copolymer
P-04-0884 09/07/04 12/05/04 CBI (G) Resin coating (G) Urethane acrylate
P-04-0892 09/08/04 12/06/04 Henkel (S) A component of adhesive formulations for general industrial bonding applications (S) Hexanedioic acid, polymer with 2-butyl-2-ethyl-1,3-propanediol, 1,6-hexanediol and 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, 1,3-butanediol- and 2-hydroxyethyl acrylate-blocked
P-04-0893 09/08/04 12/06/04 CBI (G) Lubricant additive (G) Alkyl dithiophosphoric acid disulfide
P-04-0894 09/10/04 12/08/04 Solutia Inc (S) Scale inhibitor for industrial water treatment; scale inhibitor for oil field water treatment (S) Inulin, carboxymethyl ether, sodium salt
P-04-0899 09/10/04 12/08/04 Reichhold, Inc. (S) Intermediate for polyurethane resins (S) Sunflower oil, ester with pentaerythritol
P-04-0900 09/10/04 12/08/04 CBI (G) Polyurethane film (G) Mdi based polyurethane polymer

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 1 Test Marketing Exemption Notice Received From: 08/09/03 to 09/10/04

T-04-0006
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
09/09/04 10/23/04 CBI (G) Dispersant component (G) Alkyl zirconate

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 34 Notices of Commencement From: 08/09/04 to 09/10/04

P-01-0691
Case No. Received Date Commencement Notice End Date Chemical
08/16/04 08/10/04 (G) 2-anthracenesulfonic acid, 4-[[3-(acetylamino)phenyl]amino]-1-amino-9,10-dihydro-9,10-dioxo-, compound with substituted amine polymer
P-01-0826 08/24/04 08/11/04 (G) Acrylamide alkyl propanesulfonic acid, vinyl alkyllactam, vinyl alkylamide, alkenamide, neutralized salt
P-02-0939 08/23/04 07/28/04 (G) Fatty acids, polymer with peroxide, alkyl acrylate, alkeneoic acid and alkenylbenzene.
P-02-0949 08/23/04 07/22/04 (G) Fatty acids, polymer with alicyclic alcohol, cyclic carboxylic acid, tetra hydroxy alkane and glycol.
P-03-0255 08/16/04 07/14/04 (G) Phenol and vinyltolvene based hydrocarbon resin.
P-03-0679 08/10/04 07/23/04 (G) Olefin acrylate copolymer
P-03-0854 08/11/04 08/05/04 (G) Polyurea
P-04-0035 08/19/04 08/09/04 (G) Cross-linked aminopolyamide resin
P-04-0077 08/18/04 07/21/04 (G) Acrylic copolymer
P-04-0078 08/18/04 07/21/04 (G) Acrylic copolymer
P-04-0124 08/19/04 07/29/04 (G) Polymethylene polyphenylene polyurea polymer
P-04-0126 08/16/04 07/23/04 (G) Diphosphoric acid, amine salt
P-04-0152 08/23/04 08/10/04 (G) Polyester acrylate
P-04-0187 08/26/04 08/19/04 (G) Modified polyester
P-04-0393 08/09/04 06/30/04 (G) Styrene acrylic copolymer
P-04-0417 08/16/04 08/04/04 (G) Polyfluoroalkylether
P-04-0427 08/09/04 07/09/04 (G) Aromatic ester
P-04-0440 08/24/04 07/08/04 (S) .alpha.-methylcyclohexanepropanol
P-04-0457 08/19/04 08/17/04 (G) Alkyl methacrylate copolymer
P-04-0466 08/11/04 07/17/04 (G) Acrylic solution polymer
P-04-0496 08/09/04 07/21/04 (G) Substituted phthalocyanine dye
P-04-0499 08/09/04 07/21/04 (G) Direct yellow azo dye
P-04-0507 08/09/04 07/21/04 (G) Acid red quinone dye
P-04-0511 08/23/04 08/17/04 (S) Terpenes and terpenoids, sunflower-oil
P-04-0526 08/13/04 08/12/04 (G) Acrylic polymer
P-04-0533 08/16/04 08/05/04 (G) Acrylic polymer
P-04-0546 08/25/04 08/11/04 (G) Polyurethane prepolymer, polyurethane hot melt adhesive
P-04-0548 08/19/04 08/04/04 (G) Pentaerythritol, mixed c7-c8 esters
P-92-0531 08/18/04 07/29/04 (G) Transition metal compound
P-92-0532 08/18/04 07/29/04 (G) Transition metal compound
P-93-0478 08/09/04 06/01/95 (G) Aromatic copolyamic acid
P-99-0258 08/13/04 08/05/04 (G) Cycloaliphatic amine adducts
P-99-0273 08/27/04 08/16/04 (G) Amidoamine
P-99-0529 08/18/04 05/10/04 (G) Polyurethane methacrylate

List of Subjects

  • Environmental protection
  • Chemicals
  • Premanufacturer notices

Dated: September 21, 2004.

Anthony Cheatham,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. 04-21940 Filed 9-29-04; 8:45 am]

BILLING CODE 6560-50-S