Certain New Chemicals; Receipt and Status Information

Download PDF
Federal RegisterAug 30, 2004
69 Fed. Reg. 52897 (Aug. 30, 2004)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 13, 2004 to August 6, 2004, consists of the PMNs, pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2004-0110 and the specific PMN number or TME number, must be received on or before September 29, 2004.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2004-0110. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/fedrgstr/ .

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/ , and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2004-0110. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2004-0110 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-20040110 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 13, 2004 to August 06, 2004, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 63 Premanufacture Notices Received From: 07/13/04 to 08/06/04

P-04-0729
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
07/13/04 10/10/04 CBI (G) Use as a component of food packaging and other industrial uses. (G) Modified sbs copolymer
P-04-0730 07/13/04 10/10/04 Arizona Chemical Company (S) Tackifying resin for adhesive formulations (S) Terpenes and terpenoids, turpentine-oil, 3-carene fraction, polymers with phenol
P-04-0731 07/13/04 10/10/04 Arizona Chemical Company (S) Tackifying resin for adhesive formulations (S) Terpenes and terpenoids, turpentine-oil, 3-carene fraction, polymers with phenol and turpentine-oil .alpha.-pinene fraction terpenes
P-04-0732 07/13/04 10/10/04 Arizona Chemical Company (S) Tackifying resin for adhesive formulations (S) Terpenes and terpenoids, turpentine-oil, 3-carene fraction, polymd
P-04-0733 07/13/04 10/10/04 Arizona Chemical Company (S) Tackifying resin for adhesive formulations (S) Terpenes and terpenoids, turpentine-oil, 3-carene fraction, polymers with turpentine-oil .alpha.-pinene fraction terpenes
P-04-0734 07/13/04 10/10/04 Arizona Chemical Company (S) Tackifying resin for adhesive formulations (S) Terpenes and terpenoids, turpentine-oil, 3-carene fraction, polymers with turpentine-oil .beta.-pinene fraction terpenes
P-04-0735 07/13/04 10/10/04 CBI (G) Insulation sizing (G) Modified polycarboxylate
P-04-0736 07/13/04 10/10/04 CBI (G) Insulation sizing (G) Modified polycarboxylate
P-04-0737 07/13/04 10/10/04 CBI (G) Insulation sizing (G) Modified polycarboxylate
P-04-0738 07/13/04 10/10/04 CBI (G) Insulation sizing (G) Modified polycarboxylate
P-04-0739 07/13/04 10/10/04 CBI (G) Insulation sizing (G) Modified polycarboxylate
P-04-0740 07/13/04 10/10/04 CBI (G) Insulation sizing (G) Modified polycarboxylate
P-04-0741 07/13/04 10/10/04 Arizona Chemical Company (S) Chemical intermediate in production of terpene phenol resins and polyterpene resins (S) Terpenes and terpenoids, turpentine-oil, 3-carenefraction
P-04-0742 07/14/04 10/11/04 CBI (G) A solid used in the printing industry; a solid used in the pharmaceutical industry (G) Caprylic / capric glycerides
P-04-0743 07/15/04 10/12/04 CIBA Specialty Chemicals Corporation, Textile Effects (S) A flame retardant for textile fabrics (G) Substituted phosphonic acid compounded with substituted urea
P-04-0744 07/15/04 10/12/04 CBI (G) Polymer for coatings (G) Acrylate copolymer
P-04-0745 07/15/04 10/12/04 The Dow Chemical Company (S) Adhesion promoter (G) Organosilane ester
P-04-0746 07/15/04 10/12/04 The Dow Chemical Company (S) Accelerator for use in adhesive (G) Amino phenolic reaction product with polyvinylphenol
P-04-0747 07/14/04 10/11/04 CBI (G) A liquid used in the printing process (G) Propylene glycol diethylhexanoate
P-04-0748 07/14/04 10/11/04 CBI (G) Plating agent (G) Imidazolesilane
P-04-0749 07/15/04 10/12/04 NA Industries, Inc. (G) Concrete additive (G) Polycarboxylated derivertive
P-04-0750 07/15/04 10/12/04 NA Industries, Inc. (G) Concrete additive (G) Polycarboxylated derivertive
P-04-0751 07/16/04 10/13/04 CBI (S) Spray-applied, low voc coatings for metal surfaces (G) Alkanedioic acid, polymer with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 1,3-isobenzofurandione and 2-methyl-1,3-propanediol, 2-hydroxy-3-[(1-oxoneodecyl)oxy]propyl ester
P-04-0752 07/16/04 10/13/04 CBI (G) Fuel additive (G) Organomodified siloxane and silicone
P-04-0753 07/16/04 10/13/04 CBI (G) Laminating adhesive (G) Polyurethane
P-04-0754 07/16/04 10/13/04 CBI (G) Laminating adhesive (G) Polyurethane
P-04-0755 07/16/04 10/13/04 CBI (G) Laminating adhesive (G) Polyurethane
P-04-0756 07/16/04 10/13/04 BASF Corporation (S) Colorant in thermoplastics; colorant for ink jet printing inks (G) Derivative of c.i. pigment yellow 138
P-04-0757 07/19/04 10/16/04 CBI (S) Modified resin used as a component in a protective coating (paint) (S) Hexanedioic acid, polymer with 1,4-cyclohexanedimethanol, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol and hexahydro-1,3-isobenzofurandione, 3-mercaptopropanoate 3,5,5-trimethylhexanoate
P-04-0758 07/19/04 10/16/04 CBI (G) Coating (G) Blocked polymeric isocyanate
P-04-0759 07/21/04 10/18/04 Surface specialties, Inc. (S) Chemical resistant paints (G) Aliphatic polyamine
P-04-0760 07/21/04 10/18/04 CBI (G) Polymer for coatings (G) Acrylic polymer
P-04-0761 07/21/04 10/18/04 CBI (S) Stabilizer for plastics (G) Zinc and phosphorous containing compounds
P-04-0762 07/21/04 10/18/04 CBI (G) Leather fat liquor (G) Bisulfited natural oil rs
P-04-0763 07/22/04 10/19/04 CBI (G) Polymer admixture for cements (G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium sodium salt
P-04-0764 07/22/04 10/19/04 CBI (G) Polymer admixture for cements (G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), sodium salt
P-04-0765 07/19/04 10/16/04 Macdermid, Inc. (G) Photocure polymer, open non-dispensive use (G) Polyether diol, copolymer with toluene diisocyante, methacrylic acid ester-blocked
P-04-0766 07/23/04 10/20/04 Sud-Chemie, Inc. (G) Water emulsified alkyd for use as a deck, wood, or concrete stain, which can be zero voc and yield good wood/concrete penetration primary markets would be architectural coatings (G) Mineral/vegetable oil based alkyd
P-04-0767 07/26/04 10/23/04 Huntsman PetroChemical Corporation (G) As a catalyst (G) Substituted ammonium formate
P-04-0768 07/26/04 10/23/04 Clariant LSM (America) Inc. (S) Raw material for pesticide intermediate (G) Trihalosubstituted benzene
P-04-0769 07/26/04 10/23/04 CIBA Specialty Chemicals Corporation (S) Rheology modifier for polymers (G) Substituted methyl ester of octadecanoic acid
P-04-0770 07/27/04 10/24/04 American Ingredients Company (S) Emulsifier in food products; industrial solvent, process-aid and lubricant (G) Mixture of esters from the reaction of fatty acids with a short-chain hydroxy acid
P-04-0771 07/28/04 10/25/04 Clariant LSM (America) Inc. (S) Active pesticide (G) [(halo-alkoxy) aryl] alkyl](alkoxyaryl) (dialkyl) silane
P-04-0772 07/28/04 10/25/04 Clariant LSM (America) Inc. (S) Pesticide intermediate (G) (alkoxyaryl) [(dihaloaryl)alkyl] dialkylsilane
P-04-0773 07/28/04 10/25/04 Siltech LLC (S) Additive for pulp deformers (S) Siloxanes and silicones, 3-[3-(diethylmethylammonio)-2-hydroxypropoxyl]propyl me, di me, chlorides
P-04-0774 07/28/04 10/25/04 Clariant LSM (America) Inc. (S) Pesticide intermediate (G) [( dihaloaryl) alkyl] (dialkyl) halosilane
P-04-0775 07/28/04 10/25/04 Clariant LSM (America) Inc. (S) Pesticide intermediate (G) Halogen substituted alkylbenzene
P-04-0776 07/28/04 10/25/04 CBI (S) Industrial intermediate (G) Heteromonocyclo-beta-(2,4-dichlorophenyl)-1-propanol
P-04-0777 07/29/04 10/26/04 Synplex Chemical Imports LLC (G) Silicone-modified alkyd resin (S) Silsesquioxanes, ph pr, polymers with pentaerythritol, phthalic anhydride, soybean oil and trimethylolethane
P-04-0778 07/29/04 10/26/04 The Sherwin Williams Company (G) Open, non-dispersive use (G) Polyester
P-04-0779 07/29/04 10/26/04 CBI (S) Roof coating adhesive (G) Aliphatic polyether polyolefin polyurethane
P-04-0780 07/29/04 10/26/04 Eastman Chemical Company (G) Chemical intermediate (S) Butanoic acid, 3-oxo-, 2,2-dimethyl-1,3-propanediyl ester
P-04-0781 07/30/04 10/27/04 CBI (G) Coating (G) Acrylic polymer
P-04-0782 07/30/04 10/27/04 The Dow Chemical Company (S) Injection molded footwear (G) Mdi-based polycaprolactone polyurethane
P-04-0783 07/30/04 10/27/04 Quest International Fragrances Co. (S) Fragrance ingredient (S) 2-ethyl-n-methyl-n(3-methylphenyl)butanamide
P-04-0784 07/30/04 10/27/04 CBI (G) Machine seals (G) 4,4'mdi based polyurethane polymer
P-04-0785 08/02/04 10/30/04 Forbo Adhesives, LLC (G) Holt melt polyurethane adhesive (G) Isocyanate functional polyester polyether urethane polymer
P-04-0786 08/02/04 10/30/04 Degussa Corporation (S) Automotive clearcoats (G) Cycloaliphatic isocyanate polymer with bis(alkoxysilylalkyl)amine
P-04-0787 08/04/04 11/01/04 CIBA Specialty Chemicals Corporation (S) Wetting agent for inorganic fillers and pigments in pvc compounds (G) Polyether carboxylate
P-04-0788 08/03/04 10/31/04 Rutgers Organics Corporation (S) Anionic surfactant for water-based cleaners; surfactant for litho printing plate cleaners (G) Alkylnaphthalene sulfonate-sodium salt
P-04-0789 08/03/04 10/31/04 Rutgers Organics Corporation (S) Anionic surfactant for water-based cleaners; surfactant for litho printing plate cleaners (G) Alkylnaphthalene sulfonate-sodium salt
P-04-0790 08/04/04 11/01/04 Gharda Chemicals Ltd. (S) Molding and extrusion; compounding (G) Polyethersulfone copolymer
P-04-0794 08/06/04 11/03/04 AOC L.L.C. (S) Polyester component for gelcoat resin for spray up of fiberglass reinforced plastic parts (S) Hexanedioic acid, polymer with 2,2-dimethyl-1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 2,5-furanedione and 1,2-propanediol, 2-ethylhexyl ester

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 32 Notices of Commencement From: 07/13/04 to 08/06/04

P-00-0635
Case No. Received Date Commencement Notice End Date Chemical
07/26/04 07/10/04 (S) 1,3-dioxolan-2-one, 4-ethenyl
P-00-0758 08/02/04 07/20/04 (G) Isocyanate-terminated polyester polyurethane polymer
P-00-1024 08/04/04 07/30/04 (G) Epoxy polyamine adduct
P-01-0835 08/04/04 02/01/02 (G) Aliphatic ester of dicarboxylic acid
P-02-1071 08/02/04 06/28/04 (G) Alkylphosphine
P-03-0018 07/23/04 07/09/04 (G) Polysubstituted imidazole
P-03-0199 07/21/04 07/15/04 (G) Polyurethane
P-03-0341 08/02/04 07/23/04 (G) Funtional alcohol, polymer with ipdi, 2-hydroxyethyl acrylate-blocked
P-03-0571 07/13/04 09/24/03 (S) Poly[oxy(methyl-1,2-ethanediyl)],.alpha.,.alpha.′-(1,6-dioxo-1,6 hexanediyl)bis[.omega.-(tetradecyloxy)-
P-03-0724 07/21/04 07/08/04 (G) Polyetherester diepoxide
P-03-0763 07/13/04 06/25/04 (G) Modified polyisocyanate
P-04-0097 07/16/04 07/15/04 (G) Cycloaliphatic ester
P-04-0123 07/14/04 06/30/04 (G) Ppdi/carbonate/caprolactone/ether prepolymer
P-04-0254 07/26/04 07/08/04 (G) Mixed metal complex
P-04-0319 08/02/04 07/19/04 (S) Distillates (fischer-tropsch), hydroisomerized middle, C10-13-branched alkane fraction
P-04-0353 07/14/04 07/04/04 (G) Azo nickel complex
P-04-0367 08/04/04 07/29/04 (G) Fatty acid ester amine compound
P-04-0370 08/06/04 08/02/04 (G) Acrylic polymer
P-04-0392 08/04/04 07/29/04 (G) Aliphatic n-substituted carboxylic acid amide, hydrochloride
P-04-0433 08/02/04 07/14/04 (G) Polycarboxylate polymer modified with alkylpoly(oxyalkylenediyl), calcium salt
P-04-0437 07/21/04 07/07/04 (G) Acrylate copolymer
P-04-0443 07/27/04 07/23/04 (G) Aliphatic polyurethane
P-04-0455 07/29/04 07/22/04 (G) 4-propyl-1,3-disubstituted benzene
P-04-0458 08/04/04 07/29/04 (G) Salt of acidic and basic polymers
P-04-0464 07/26/04 06/22/04 (G) 2-propenoic acid, dimers and compounds
P-04-0468 08/04/04 07/29/04 (G) Salt of acidic and basic polymers
P-04-0469 07/14/04 06/25/04 (G) Aliphatic n-substituted carboxylic acid amid
P-04-0476 08/02/04 07/01/04 (G) Alkylbenzene sulfonic acids, metal salts
P-95-0477 07/23/04 07/16/04 (S) 9h-fluorene-9-carboxylic acid, 9-hydroxy
P-98-0959 07/13/04 07/09/04 (G) Alkoxy benzoic acid
P-98-1057 07/13/04 07/09/04 (G) Substituted benzamide
P-98-1058 07/23/04 07/09/04 (G) Disubstituted heteromonocycle

List of Subjects

  • Environmental protection
  • Chemicals
  • Premanufacturer notices

Dated: August 18, 2004.

Anthony L. Cheatham,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. 04-19710 Filed 8-27-04; 8:45 am]

BILLING CODE 6560-50-S