Certain New Chemicals; Receipt and Status Information

Download PDF
Federal RegisterJun 15, 2000
65 Fed. Reg. 37559 (Jun. 15, 2000)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from April 10, 2000 to April 21, 2000, consists of the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the “SUPPLEMENTARY INFORMATION.” To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51946 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Director, Office of Program Management, and Evaluation, Office of Pollution Prevention and Toxics (7401), Office of Pollution Prevention and Toxics, Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone numbers: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under “FOR FURTHER INFORMATION CONTACT.”

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/ . On the Home Page select “Laws and Regulations” and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the “Federal Register” listings at http://www.epa.gov/fedrgstr /.

2. In person. The Agency has established an official record for this action under docket control number OPPTS-51946. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is (202) 260-7099.

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51946 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 260-7093.

3. Electronically. You may submit your comments electronically by e-mail to: “oppt.ncic@epa.gov,” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51946 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under “FOR FURTHER INFORMATION CONTACT.”

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from April 10, 2000 to April 21, 2000, consists of the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 36 Premanufacture Notices Received From: 04/10/00 to 04/21/00

P-00-0707
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
04/10/00 07/09/00 CBI (G) Intermediate (G) Phosphate ester of alkyl phenol ethoxylate
P-00-0708 04/10/00 07/09/00 Dystar L. P. (S) Coloration of wool fabric (G) Chromate(2-), [3-[(4,5-dihydro-3-methyl-5-oxo-1-phenyl-1 h-pyrazol-4-yl)azo]-4-hydroxy-(substituted)][2-[[(2-substituted)]]-4-nitrophenolato(2-)-n 2, o 1, o 2]-, disodium*
P-00-0709 04/10/00 07/09/00 CBI (S) Spin-on dielectric film; spin-on passivation layer; characterization of thin films; matrix material (G) Methylphenylsiloxane
P-00-0710 04/10/00 07/09/00 Dystar L. P. (S) Dyestuff for coloration of wool (G) Benzenesulfonic acid, 2,2′-(9,10-dihydro-5,8-dihydroxy-9,10-dioxo-1,4-anthracenediyl) (substituted)-,disodium salt
P-00-0711 04/10/00 07/09/00 Dystar L. P. (S) Dyestuff for coloration of wool (G) Benzenesulfonic acid, 2,2′-(9,10-dihydro-5,8-dihydroxy-9,10-dioxo-1,4-anthracenediyl) (substituted)-,disodium salt
P-00-0712 04/10/00 07/09/00 Dystar L. P. (S) Dyestuff for coloration of wool (G) Benzenesulfonic acid, 2,2′-(9,10-dihydro-5,8-dihydroxy-9,10-dioxo-1,4-anthracenediyl) (substituted)-,disodium salt
P-00-0713 04/10/00 07/09/00 CBI (G) Dye for cotton (G) Arylazo substituted sulfonated naphthalene compound
P-00-0714 04/10/00 07/09/00 CBI (S) Processing aid for leather finishing (G) Aminoalkylcarboxilic acid, sodium salt, polymer with saturated dicarboxylic acid, alkyldiols, and alkylisocyanates
P-00-0715 04/10/00 07/09/00 CBI (G) Open, non-dispersive use (G) Fluorothane oligomer
P-00-0716 04/10/00 07/09/00 CBI (G) Emulsifier (G) Salt of perflluoro fatty acids
P-00-0717 04/10/00 07/09/00 Zeon Chemicals L. P. (S) Microlithography (resist coating) (G) Hydroxystyrene-acrylate copolymer
P-00-0718 04/10/00 07/09/00 Arteva Specialties s.a.r.l. d/b/a kosa (G) Structural textile material (G) Modified polyester
P-00-0719 04/10/00 07/09/00 CBI (S) For flexible industrial coatings (G) Flexible acrylic polymer
P-00-0720 04/10/00 07/09/00 CBI (S) For flexible industrial coatings (G) Flexible acrylic polymer
P-00-0721 04/10/00 07/09/00 CBI (S) For flexible industrial coatings (G) Flexible acrylic polymer
P-00-0722 04/10/00 07/09/00 CBI (S) For flexible industrial coatings (G) Flexible acrylic polymer
P-00-0723 04/11/00 07/10/00 CBI (G) Destructive use (G) Acrylic polymer
P-00-0724 04/11/00 07/10/00 CBI (G) Open, non-dispersive use. (G) Polyether modified acrylic
P-00-0725 04/12/00 07/11/00 Johnson Polymer (G) Open, non-dispersive use (G) Acrylic polymer
P-00-0726 04/12/00 07/11/00 Johnson Polymer (G) Open, non-dispersive use (G) Acrylic polymer
P-00-0727 04/13/00 07/12/00 Engelhard Corporation (S) Improved dispersion and applications in powder coating systems (G) Aluminum amino laurate
P-00-0728 04/11/00 07/10/00 3M Company (G) (G) Fluorochemical polyurethane
P-00-0729 04/11/00 07/10/00 3M Company (G) (G) Fluorochemical polyurethane
P-00-0730 04/13/00 07/12/00 CBI (G) Open, non-dispersive (component of leather finishing system) (G) Polyester urethane
P-00-0731 04/13/00 07/12/00 Rohm and Haas Company (S) Catalyst for manufacture of epoxy resins (S) Phosphonium, ethyltris(4-methylphenyl)-, acetate*
P-00-0732 04/17/00 07/16/00 Xerox Corporation (G) Reactant for a surface-treated material (G) Silane
P-00-0733 04/17/00 07/16/00 CBI (G) Component of coating with open use (G) Phosphate ester
P-00-0734 04/18/00 07/17/00 Eastman Kodak Company (G) Component in imaging formulations (G) Substituted heterocyclic metal complex
P-00-0735 04/19/00 07/18/00 Raschig (G) Functional monomer in polymers (G) Dimethylaminoalkyl amide of an unsaturated carbonic acid, sulfoalkylated
P-00-0736 04/19/00 07/18/00 CBI (S) Inks; coatings (G) Polyester acrylate
P-00-0737 04/20/00 07/19/00 CBI (G) Raw material for karl fischer reagents (G) 2-(methylamino) pyridine
P-00-0738 04/20/00 07/19/00 Shell Chemical Co. (S) Coatings for railcars; coatings for marine vessels (S) Formaldehyde, reaction products with 1,3-benzenedimethanamine and bisphenol a*
P-00-0739 04/19/00 07/18/00 CBI (G) Lubricant additive (G) Phosphoric acid esters, amine salt
P-00-0740 04/20/00 07/19/00 The P. D. George Company (S) Electrical insulation varnish (G) 2,5-furandione polymer with 1,2-ethanediol, alicyclic compound, and carboxylic acid
P-00-0741 04/21/00 07/20/00 CBI (S) Raw material for use in fragrances for soaps, detergents, cleaners and other household products (G) 2-hydroxy-3-alkyl substituted cycloalkenone
P-00-0742 04/21/00 07/20/00 CBI (S) Polyurethane for food packaging adhesive (G) Polyurethane

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 25 Notices of Commencement From: 04/10/00 to 04/21/00

P-00-0007
Case No. Received Date Commencement/ Import Date Chemical
04/20/00 04/18/00 (S) D-glucuronic acid, polymer with 6-deoxy-l-mannose and d-glucose, acetate, calcium magnesium potassium sodium salt*
P-00-0024 04/19/00 03/26/00 (G) Aluminum alkylamide
P-00-0033 04/14/00 03/16/00 (G) Triazolinone
P-00-0034 04/14/00 03/15/00 (G) Thioimidocarbonate
P-00-0050 04/14/00 03/16/00 (G) Triazolone
P-00-0054 04/14/00 03/15/00 (G) Isothiocyanatidate
P-00-0057 04/19/00 03/21/00 (G) Polyester acrylate
P-00-0061 04/18/00 04/09/00 (S) Bicyclo[2.2.1]hept-2-ene, 5-ethenyl-, polymer with ethene and 1-propene
P-00-0175 04/18/00 04/03/00 (G) Alkyl ether carboxylic acid
P-00-0176 04/18/00 04/03/00 (G) Alkyl ether carboxylic acid
P-00-0177 04/18/00 04/03/00 (G) Alkyl ether carboxylic acid, sodium salt
P-00-0343 04/17/00 03/15/00 (S) Ethanone, 1-[3-(trifluoromethyl)phenyl]-, oxime*
P-00-0350 04/21/00 04/18/00 (G) Ketimine functional oligomer
P-00-0369 04/10/00 03/30/00 (S) 5-nonanone, 4-methyl-*
P-94-0903 04/10/00 03/15/00 (S) 2-tetradecyl-1-octadecanol*
P-94-0904 04/10/00 03/15/00 (S) 2-tetradecyl-1-eicosanol*
P-94-0905 04/10/00 03/15/00 (S) 2-hexadecyl-1-octadecanol*
P-94-0906 04/10/00 03/15/00 (S) 2-hexadecyl-1-eicosanol*
P-98-0024 04/17/00 03/10/00 (G) Benzoic acid derivative
P-98-1161 04/11/00 03/08/00 (S) Urea, monomethanesulfonate (1:1)*
P-99-0031 04/12/00 03/30/00 (G) Calcuim salts of alkyl salicylate and alkyl phenate
P-99-0581 04/10/00 03/21/00 (G) Chromate, bis[[[[[(substituted) azo]phenyl]sulfonyl] amino]-hydroxy-[(substituted) azo]-naphthalenesulfonato]-, pentasodium*
P-99-1222 04/11/00 03/23/00 (G) Substituted benzoic acid ester
P-99-1362 04/12/00 04/04/00 (S) Phosphonic acid, monopotassium salt*
P-99-1388 04/17/00 04/12/00 (G) Styrene acrylic polymer

List of Subjects

  • Environmental protection
  • Chemicals
  • Premanufacturer notices

Dated: May 25, 2000.

Deborah A. Williams,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. 00-15165 Filed 6-14-00; 8:45 am]

BILLING CODE 6560-50-F