Certain Iron Mechanical Transfer Drive Components From Canada: Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the “Department”) preliminarily determines that certain iron mechanical transfer drive components (“iron transfer drive components”) from Canada are being, or are likely to be, sold in the United States at less than fair value (“LTFV”), as provided in section 733(b) of the Tariff Act of 1930, as amended (the “Act”). The period of investigation is October 1, 2014 through September 30, 2015. The estimated dumping margins of sales at LTFV are listed in the “Preliminary Determination” section of this notice. Interested parties are invited to comment on this preliminary determination.

DATES:

Effective June 8, 2016.

FOR FURTHER INFORMATION CONTACT:

Stephen Bailey or Robert Bolling, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0193 or (202) 482-3434, respectively.

SUPPLEMENTARY INFORMATION:

Background

On October 28, 2015, the Department received an antidumping duty (“AD”) petition concerning imports of iron transfer drive components from Canada, filed in proper form on behalf of TB Wood's Incorporated (“TB Woods”) (“Petitioner”). The Department initiated this investigation on November 17, 2015. Pursuant to section 733(c)(1)(A) of the Act, the Department postponed this preliminary LTFV determination by 50 days until May 31, 2016.

For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum that is dated concurrently with and hereby adopted by this notice. The Preliminary Decision Memorandum is a public document and is made available to the public via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (“ACCESS”). ACCESS is available to registered users at http://access.trade.gov,, and is available to all parties in the Department's Central Records Unit, room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly on the internet at http://enforcement.trade.gov/frn/. The signed and the electronic versions of the Preliminary Decision Memorandum are identical in content.

Tolling and Postponement of Deadline for Preliminary Determination

As explained in the memorandum from the Acting Assistant Secretary for Enforcement and Compliance, the Department exercised its discretion to toll deadlines for the duration of the partial closure of the Federal Government due from Snowstorm “Jonas” from January 22, through January 27, 2016. Therefore, all deadlines in this segment of the proceeding have been extended by four business days. If the new deadline falls on a non-business day, in accordance with the Department's practice, the deadline will become the next business day. In this case, the deadline is May 31, 2016.

Scope of the Investigation

The merchandise covered by this investigation is iron mechanical transfer drive components. The merchandise subject to this investigation is properly classified under Harmonized Tariff Schedule of the United States (“HTSUS”) subheadings 8483.30.8090, 8483.50.6000, 8483.50.9040, 8483.50.9080, 8483.90.3000, 8483.90.8080. Covered merchandise may also enter under the following HTSUS subheadings: 7325.10.0080, 7325.99.1000, 7326.19.0010, 7326.19.0080, 8431.31.0040, 8431.31.0060, 8431.39.0010, 8431.39.0050, 8431.39.0070, 8431.39.0080, and 8483.50.4000. Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the merchandise under investigation is dispositive. For a complete description of the scope of the investigation, see Appendix II to this notice.

Scope Comments

In accordance with the preamble to the Department's regulations, the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., “scope”). Certain interested parties commented on the scope of the investigation, as it appeared in the Initiation Notice. For a summary of the product coverage comments and rebuttal responses submitted to the record, and an accompanying discussion and analysis of all comments timely received, see the Department's Scope Memorandum issued concurrently with this notice.

On March 30, 2016, Petitioner filed an amendment to the scope of the investigation to exclude certain finished torsional vibration dampers (“TVD”). On April 8, 2016, the Department preliminarily excluded TVDs from the scope of the investigation. On May 16, 2016, Petitioner filed an additional amendment to the scope to exclude certain light-duty, fixed- and variable-pitch, non-synchronous sheaves and certain bushings. As discussed in the Scope Memorandum, the Department has preliminarily excluded certain light-duty, fixed- and variable-pitch, non-synchronous sheaves and certain bushings. For a complete description of the scope exclusion language, see the full scope at Appendix II to this notice as well as the Department's Scope Memorandum issued concurrently with this notice.

Methodology

The Department is conducting this investigation in accordance with section 731 of the Act. The sole selected mandatory respondent, Baldor Electric Company Canada (“Baldor”), failed to participate in this investigation and to respond to the Department's Sections A, B, C, and D supplemental questionnaires. As a result, we preliminarily determined to apply adverse facts available (“AFA”) to Baldor, in accordance with section 776 of the Act and 19 CFR 351.308. For a full discussion of the rationale underlying our preliminary determination, as well as a description of the methodology used, see the Preliminary Decision Memorandum.

All-Others Rate

Section 735(c)(5)(A) of the Act provides that the estimated “all-others” rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero or de minimis margins, and any margins determined entirely under section 776 of the Act. Pursuant to section 735(c)(5)(B) of the Act, if the estimated weighted-average dumping margins established for all exporters and producers individually examined are zero, de minimis or determined based entirely under section 776 of the Act, the Department may use any reasonable method to establish the estimated dumping margin for all other producers or exporters.

We determined the dumping margin for mandatory respondent Baldor under section 776 of the Act. Consequently, the only available dumping margins for this preliminary determination are found in the petition and are margins upon which we initiated. Pursuant to section 735(c)(5)(B) of the Act, the Department's practice under these circumstances has been to calculate the “all-others” rate as a simple average of these margins from the petition. For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memoranda.

Preliminary Determination

The preliminary dumping margins are as follows:

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, we will instruct U.S. Customs and Border Protection (“CBP”) to suspend liquidation of all entries of iron transfer drive components from Canada as described in the “Scope of Investigation” section entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register.

Pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), we will instruct CBP to require cash deposits equal to the dumping margins, as indicated in the chart above, as follows: (1) The rate for the mandatory respondent listed above will be the respondent-specific rate we determined in this preliminary determination; (2) if the exporter is not a mandatory respondent identified above, but the producer is, the rate will be the specific rate established for the producer of the subject merchandise; and (3) the rate for all other producers or exporters will be the “all-others” rate. This suspension of liquidation instruction will remain in effect until further notice.

Disclosure

Normally, the Department discloses to interested parties the calculations performed in connection with a preliminary determination within five days of the date of publication of the notice of preliminary determination in the Federal Register, in accordance with 19 CFR 351.224(b). However, because the Department preliminarily applied AFA to mandatory respondent Baldor in this investigation in accordance with section 776 of the Act, there are no calculations to disclose.

Public Comment

Interested parties are invited to comment on this preliminary determination. Interested parties may submit case briefs to the Department no later than 30 days after the date of publication of the preliminary determination. Rebuttal briefs, the content of which is limited to the issues raised in the case briefs, must be filed within five days from the deadline date for the submission of case briefs. Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities. All documents must be filed electronically using ACCESS. An electronically filed document must be received successfully in its entirety by ACCESS by 5 p.m. Eastern Standard Time on the date the document is due.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request for a hearing to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce. An electronically-filed request for a hearing must be received successfully in its entirety by ACCESS by 5:00 p.m. Eastern Time, within 30 days after the date of publication of this notice. Hearing requests should contain the party's name, address, and telephone number, the number of participants, and a list of the issues to be discussed. If a request for a hearing is made, we will inform parties of the scheduled date and time for the hearing which will be held at the U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Verification

Because Baldor failed to provide information requested by the Department and the Department preliminarily determines Baldor to have been uncooperative, verification will not be conducted.

Postponement of Final Determination and Extension of Provisional Measures

Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination by the Department, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise. 19 CFR 351.210(e)(2) requires that requests by respondents for postponement of a final antidumping determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

On May 16, 2016, pursuant to 19 CFR 351.210(b)(2)(ii), Baldor requested that the Department postpone its final determination, and requested that the Department extend the application of the provisional measures prescribed under section 733(d) of the Act and 19 CFR 351.210(e)(2), from a four-month period to a period not to exceed six months. In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii) and (e)(2), because (1) our preliminary determination is affirmative; (2) the requesting exporter accounts for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, we are postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, we will make our final determination no later than 135 days after the date of publication of this preliminary determination, pursuant to section 735(a)(2) of the Act.

International Trade Commission (“ITC”) Notification

In accordance with section 733(f) of the Act, we will notify the ITC of our affirmative preliminary determination of sales at LTFV. If our final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after our final determination whether these imports are materially injuring, or threaten material injury to, the U.S. industry.

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Appendix I—List of Topics Discussed in the Preliminary Decision Memoranda

1. Summary

2. Background

3. Period of Investigation

4. Postponement of Final Determination and Extension of Provisional Measures

5. Scope of the Investigation

6. Scope Comments

7. Product Comparisons

8. Respondent Selection

9. Application of Facts Available and Use of Adverse Inference

10. Selection of the AFA Rate

11. Corroboration of Secondary Information

12. All-Others Rate

13. Conclusion

Appendix II—Scope of the Investigation

The products covered by this investigation are iron mechanical transfer drive components, whether finished or unfinished (i.e., blanks or castings). Subject iron mechanical transfer drive components are in the form of wheels or cylinders with a center bore hole that may have one or more grooves or teeth in their outer circumference that guide or mesh with a flat or ribbed belt or like device and are often referred to as sheaves, pulleys, flywheels, flat pulleys, idlers, conveyer pulleys, synchronous sheaves, and timing pulleys. The products covered by this investigation also include bushings, which are iron mechanical transfer drive components in the form of a cylinder and which fit into the bore holes of other mechanical transfer drive components to lock them into drive shafts by means of elements such as teeth, bolts, or screws.

Iron mechanical transfer drive components subject to this investigation are those not less than 4.00 inches (101 mm) in the maximum nominal outer diameter.

Unfinished iron mechanical transfer drive components (i.e., blanks or castings) possess the approximate shape of the finished iron mechanical transfer drive component and have not yet been machined to final specification after the initial casting, forging or like operations. These machining processes may include cutting, punching, notching, boring, threading, mitering, or chamfering.

Subject merchandise includes iron mechanical transfer drive components as defined above that have been finished or machined in a third country, including but not limited to finishing/machining processes such as cutting, punching, notching, boring, threading, mitering, or chamfering, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the iron mechanical transfer drive components.

Subject iron mechanical transfer drive components are covered by the scope of the investigation regardless of width, design, or iron type (e.g., gray, white, or ductile iron). Subject iron mechanical transfer drive components are covered by the scope of the investigation regardless of whether they have non-iron attachments or parts and regardless of whether they are entered with other mechanical transfer drive components or as part of a mechanical transfer drive assembly (which typically includes one or more of the iron mechanical transfer drive components identified above, and which may also include other parts such as a belt, coupling and/or shaft). When entered as a mechanical transfer drive assembly, only the iron components that meet the physical description of covered merchandise are covered merchandise, not the other components in the mechanical transfer drive assembly (e.g., belt, coupling, shaft).

For purposes of this investigation, a covered product is of “iron” where the article has a carbon content of 1.7 percent by weight or above, regardless of the presence and amount of additional alloying elements.

Excluded from the scope are finished torsional vibration dampers (TVDs). A finished TVD is an engine component composed of three separate components: An inner ring, a rubber ring and an outer ring. The inner ring is an iron wheel or cylinder with a bore hole to fit a crank shaft which forms a seal to prevent leakage of oil from the engine. The rubber ring is a dampening medium between the inner and outer rings that effectively reduces the torsional vibration. The outer ring, which may be made of materials other than iron, may or may not have grooves in its outer circumference. To constitute a finished excluded TVD, the product must be composed of each of the three parts identified above and the three parts must be permanently affixed to one another such that both the inner ring and the outer ring are permanently affixed to the rubber ring. A finished TVD is excluded only if it meets the physical description provided above; merchandise that otherwise meets the description of the scope and does not satisfy the physical description of excluded finished TVDs above is still covered by the scope of the investigation regardless of end use or identification as a TVD.

The scope also excludes light-duty, fixed-pitch, non-synchronous sheaves (“excludable LDFPN sheaves”) with each of the following characteristics: Made from grey iron designated as ASTM (North American specification) Grade 30 or lower, GB/T (Chinese specification) Grade HT200 or lower, DIN (German specification) GG 20 or lower, or EN (European specification) EN-GJL 200 or lower; having no more than two grooves; having a maximum face width of no more than 1.75 inches, where the face width is the width of the part at its outside diameter; having a maximum outside diameter of not more than 18.75 inches; and having no teeth on the outside or datum diameter. Excludable LDFPN sheaves must also either have a maximum straight bore size of 1.6875 inches with a maximum hub diameter of 2.875 inches; or else have a tapered bore measuring 1.625 inches at the large end, a maximum hub diameter of 3.50 inches, a length through tapered bore of 1.0 inches, exactly two tapped holes that are 180 degrees apart, and a 2.0- inch bolt circle on the face of the hub. Excludable LDFPN sheaves more than 6.75 inches in outside diameter must also have an arm or spoke construction. Further, excludable LDFPN sheaves must have a groove profile as indicated in the table below:

In addition to the above characteristics, excludable LDFPN sheaves must also have a maximum weight (pounds-per-piece) as follows: For excludable LDFPN sheaves with one groove and an outside diameter of greater than 4.0 inches but less than or equal to 8.0 inches, the maximum weight is 4.7 pounds; for excludable LDFPN sheaves with two grooves and an outside diameter of greater than 4.0 inches but less than or equal to 8.0 inches, the maximum weight is 8.5 pounds; for excludable LDFPN sheaves with one groove and an outside diameter of greater than 8.0 inches but less than or equal to 12.0 inches, the maximum weight is 8.5 pounds; for excludable LDFPN sheaves with two grooves and an outside diameter of greater than 8.0 inches but less than or equal to 12.0 inches, the maximum weight is 15.0 pounds; for excludable LDFPN sheaves with one groove and an outside diameter of greater than 12.0 inches but less than or equal to 15.0 inches, the maximum weight is 13.3 pounds; for excludable LDFPN sheaves with two grooves and an outside diameter of greater than 12.0 inches but less than or equal to 15.0 inches, the maximum weight is 17.5 pounds; for excludable LDFPN sheaves with one groove and an outside diameter of greater than 15.0 inches but less than or equal to 18.75 inches, the maximum weight is 16.5 pounds; and for excludable LDFPN sheaves with two grooves and an outside diameter of greater than 15.0 inches but less than or equal to 18.75 inches, the maximum weight is 26.5 pounds.

The scope also excludes light-duty, variable-pitch, non-synchronous sheaves with each of the following characteristics: Made from grey iron designated as ASTM (North American specification) Grade 30 or lower, GB/T (Chinese specification) Grade HT200 or lower, DIN (German specification) GG 20 or lower, or EN (European specification) EN-GJL 200 or lower; having no more than 2 grooves; having a maximum overall width of less than 2.25 inches with a single groove, or of 3.25 inches or less with two grooves; having a maximum outside diameter of not more than 7.5 inches; having a maximum bore size of 1.625 inches; having either one or two identical, internally-threaded (i.e., with threads on the inside diameter), adjustable (rotating) flange(s) on an externally-threaded hub (i.e., with threads on the outside diameter) that enable(s) the width (opening) of the groove to be changed; and having no teeth on the outside or datum diameter.

The scope also excludes certain IMTDC bushings. An IMTDC bushing is excluded only if it has a tapered angle of greater than or equal to 10 degrees, where the angle is measured between one outside tapered surface and the directly opposing outside tapered surface.

The merchandise covered by this investigation is currently classifiable under Harmonized Tariff Schedule of the United States (“HTSUS”) subheadings 8483.30.8090, 8483.50.6000, 8483.50.9040, 8483.50.9080, 8483.90.3000, 8483.90.8080. Covered merchandise may also enter under the following HTSUS subheadings: 7325.10.0080, 7325.99.1000, 7326.19.0010, 7326.19.0080, 8431.31.0040, 8431.31.0060, 8431.39.0010, 8431.39.0050, 8431.39.0070, 8431.39.0080, and 8483.50.4000. These HTSUS subheadings are provided for convenience and customs purposes. The written description of the scope of the investigation is dispositive.