Certain Cold-Rolled Steel Flat Products From the United Kingdom: Final Results of Antidumping Duty Administrative Review; 2017-2018

Download PDF
Federal RegisterNov 6, 2019
84 Fed. Reg. 59771 (Nov. 6, 2019)

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) determines that the producer/exporter subject to this review made sales of subject merchandise at less than normal value during the period of review (POR) September 1, 2017 through August 31, 2018.

DATES:

Applicable November 6, 2019.

FOR FURTHER INFORMATION CONTACT:

Thomas Schauer, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-0410.

SUPPLEMENTARY INFORMATION:

Background

On July 19, 2019, Commerce published the Preliminary Results of the administrative review of the antidumping duty order on certain cold-rolled steel flat products (cold-rolled steel) from the United Kingdom. The administrative review covers one producer or exporter of the subject merchandise, Caparo Precision Strip, Ltd./Liberty Performance Steels Ltd. (Liberty). We gave interested parties an opportunity to comment on the Preliminary Results, and we received a case brief from Liberty. We did not receive any rebuttal briefs.

See Certain Cold-Rolled Steel Flat Products from the United Kingdom: Preliminary Results of Antidumping Duty Administrative Review; 2017-2018, 84 FR 34868 (July 19, 2019) (Preliminary Results).

In the Initiation Notice, we initiated a review of “Caparo Precision Strip, Ltd./Liberty Performance Steels, Ltd.” See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 83 FR 57411, 57417 (November 15, 2018) (Initiation Notice). We have previously determined that Liberty Performance Steels Ltd. is the successor-in-interest to Caparo Precision Strip, Ltd.

See Liberty's Letter, “Certain Cold-Rolled Steel Flat Products from the United Kingdom: Liberty Performance Steels, Ltd. Case Brief,” dated August 19, 2019.

Commerce conducted this review in accordance with sections 751(a)(1)(B) and (2) of the Tariff Act of 1930, as amended (the Act).

Scope of the Order

The products covered by the antidumping duty order are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products subject to this review are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the Order may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000. While the HTSUS subheadings are provided for convenience and customs purposes, the written description is dispositive. A full description of the scope of the order is contained in the Issues and Decision Memorandum.

See Memorandum, “Certain Cold-Rolled Steel Flat Products from the United Kingdom: Issues and Decision Memorandum for the Final Results of Antidumping Duty Administrative Review; 2017-2018,” dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum).

Analysis of Comments Received

The issues raised by Liberty in its case brief have been addressed in the Issues and Decision Memorandum. The Issues and Decision Memorandum is a public document and is made available to the public via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov and is available to all parties in the Central Records Unit, room B8024 of the main Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly on the Enforcement and Compliance website at http://enforcement.trade.gov/frn/. The signed Issues and Decision Memorandum and the electronic version of the Issues and Decision Memorandum are identical in content. A list of the topics discussed in the Issues and Decision Memorandum is attached as the appendix to this notice.

Changes Since the Preliminary Results

Based on the comments received we made changes for these final results which are enumerated in the Issues and Decision Memorandum.

Final Results of the Administrative Review

We determine that the following weighted-average dumping margin exists for Liberty for the period of September 1, 2017 through August 31, 2018.

Producer or exporter Weighted- average dumping margin (percent)
Liberty Performance Steels Ltd 21.71

Assessment Rate

Pursuant to section 751(a)(2)(A) of the Act and 19 CFR 351.212(b)(1), Commerce will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.

For Liberty, we calculated importer-specific assessment rates on the basis of the ratio of the total amount of antidumping duties calculated for each importer's examined sales and the total entered value of the sales in accordance with 19 CFR 351.212(b)(1). For entries of subject merchandise during the POR produced by Liberty for which it did not know its merchandise was destined for the United States, we intend to instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. We intend to issue liquidation instructions to CBP 15 days after publication of these final results of review.

In these final results, Commerce applied the assessment rate calculation method adopted in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012).

Cash Deposit Requirements

The following deposit requirements will be effective upon publication of this notice for all shipments of cold-rolled steel from the United Kingdom entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for Liberty will be equal to the weighted-average dumping margin established in the final results of this administrative review; (2) for merchandise exported by producers or exporters not covered in this review but covered in a prior completed segment of the proceeding, then the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding in which the company participated; (3) if the exporter is not a firm covered in this review, a prior review, or the original investigation but the producer has been covered in a prior completed segment of this proceeding, the cash deposit rate will be the rate established for the most recent segment for the producer of the merchandise; (4) the cash deposit rate for all other producers or exporters will continue to be 22.58 percent, the all-others rate established in the less-than-fair-value investigation. These cash deposit requirements, when imposed, shall remain in effect until further notice.

See Certain Cold-Rolled Steel Flat Products from Brazil, India, the Republic of Korea, and the United Kingdom: Amended Final Affirmative Antidumping Determinations for Brazil and the United Kingdom and Antidumping Duty Orders, 81 FR 64432, 64434 (September 20, 2016).

Notification to Importers

This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in Commerce presuming that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification Regarding Administrative Protective Orders

This notice also serves as a final reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation subject to sanction.

Notification to Interested Parties

We are issuing and publishing these final results of administrative review in accordance with sections 751(a)(1) and 777(i) of the Act and 19 CFR 351.221(b)(5).

Dated: October 30, 2019.

Jeffrey I. Kessler,

Assistant Secretary for Enforcement and Compliance.

Appendix

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary

II. Background

III. Scope of the Order

IV. Changes Since the Preliminary Results

V. Discussion of the Issues

Comment 1: Major-Input Adjustment

Comment 2: Ministerial Error

VI. Recommendation

[FR Doc. 2019-24219 Filed 11-5-19; 8:45 am]

BILLING CODE 3510-DS-P