Certain Cold-Rolled Steel Flat Products From the Republic of Korea: Final Determination of Sales at Less Than Fair Value

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (“the Department”) determines that certain cold-rolled steel flat products (“cold-rolled steel”) from the Republic of Korea (Korea) are being, or are likely to be, sold in the United States at less than fair value (“LTFV”). The final estimated weighted-average dumping margins are listed below in the “Final Determination” section of this notice. The period of investigation (“POI”) is July 1, 2014, through June 30, 2015.

DATES:

Effective July 29, 2016.

FOR FURTHER INFORMATION CONTACT:

Victoria Cho or Robert James, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-5075 or (202) 482-0649, respectively.

SUPPLEMENTARY INFORMATION:

Background

The Department published the preliminary determination on March 7, 2016. A summary of the events that occurred since the Department published the Preliminary Determination, as well as a full discussion of the issues raised by parties for this final determination, may be found in the Final Issues and Decision Memorandum.

Also, as explained in the memorandum from the Acting Assistant Secretary for Enforcement and Compliance, the Department exercised its authority to toll all administrative deadlines due to the recent closure of the Federal Government. As a consequence, all deadlines in this segment of the proceeding have been extended by four business days. The revised deadline for the final determination is now July 20, 2016.

Scope of the Investigation

The product covered by this investigation is cold-rolled steel from the Republic of Korea. For a complete description of the scope of this investigation, see the “Scope of the Investigation,” in Appendix II of this notice.

Scope Comments

In accordance with the Preliminary Scope Determination, the Department set aside a period of time for parties to address scope issues in case briefs or other written comments on scope issues.

For a summary of the product coverage comments and rebuttal responses submitted to the records of the cold-rolled steel investigations, and accompanying discussion and analysis of all comments timely received, see the Final Scope Decision Memorandum. The Final Scope Decision Memorandum is incorporated by, and hereby adopted by, this notice.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs by parties in this investigation are addressed in the Final Issues and Decision Memorandum, which is hereby adopted by this notice. A list of the issues raised is attached to this notice as Appendix I. The Final Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (“ACCESS”). ACCESS is available to registered users at https://access.trade.gov and it is available to all parties in the Central Records Unit, Room B-8024 of the main Department of Commerce building. In addition, a complete version of the Final Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/index.html. The signed and electronic versions of the Final Issues and Decision Memorandum are identical in content.

Verification

As provided in section 782(i) of the Act, in January, March, and April 2016, the Department verified the sales and cost data reported by the mandatory respondents Hyundai Steel Company and POSCO, pursuant to section 782(i) of the Act. We used standard verification procedures, including an examination of relevant accounting and production records, and original source documents provided by respondents.

Use of Adverse Facts Available

In making this final determination, the Department relied, in part, on facts available and, because Hyundai Steel Company did not act to the best of its ability in responding to the Department's requests for information, we drew an adverse inference where appropriate in selecting from among the facts otherwise available. For further information, see the accompanying Final Issues and Decision Memorandum.

Changes to the Margin Calculations Since the Preliminary Determination

Based on our analysis of the comments received and our findings at verification, we made certain changes to the margin calculations for Hyundai Steel Company and POSCO. For a discussion of these changes, see the Final Issues and Decision Memorandum. We have also revised the all-others rate.

All-Others Rate

Consistent with sections 735(c)(1)(B)(i)(II) and 735(c)(5) of the Act, the Department also calculated an estimated all-others rate. Section 735(c)(5)(A) of the Act provides that the estimated all-others rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis margins, and any margins determined entirely under section 776 of the Act. Where the rates for investigated companies are zero or de minimis, or based entirely on facts otherwise available, section 735(c)(5)(B) of the Act instructs the Department to establish an “all others” rate using “any reasonable method.”

In this investigation, we calculated weighted-average dumping margins for Hyundai Steel Company and POSCO, that are above de minimis and which are not based entirely on total facts available. We calculated the all-others rate using a simple average of the dumping margins calculated for the mandatory respondents.

Final Determination Margins

The Department determines that the following estimated weighted-average dumping margins exist:

Disclosure

We intend to disclose to parties in this proceeding the calculations performed for this final determination within five days of the date of public announcement of our final determination, in accordance with 19 CFR 351.224(b).

Continuation of Suspension of Liquidation

Pursuant to section 735(c)(1)(B) of the Act, the Department will instruct U.S. Customs and Border Protection (CBP) to continue to suspend liquidation of all entries of cold-rolled steel from Korea, which were entered, or withdrawn from warehouse, for consumption on or after March 7, 2016 (the date of publication of the affirmative Preliminary Determination).

Where the product under investigation is also subject to a concurrent countervailing duty investigation, we instruct CBP to require a cash deposit less the amount of the countervailing duty determined to constitute any export subsidies. Because of the affirmative final determination in the countervailing duty investigation, suspension of liquidation will be ordered in that investigation, and so long as suspension of liquidation continues under this antidumping duty investigation, the cash deposit rates for this antidumping duty investigation will be the rates identified in the cash deposit rate column in the rate chart, above. In the event that a countervailing duty order is issued and suspension of liquidation continues in the companion countervailing duty investigation on cold-rolled steel from the Korea, the Department will continue to instruct CBP to require cash deposits adjusted by the amount of export subsidies, as appropriate. These adjustments are reflected in the final column of the rate chart, above.

International Trade Commission Notification

In accordance with section 735(d) of the Act, we will notify the ITC of the final affirmative determination of sales at LTFV. Because the final determination in this proceeding is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will make its final determination as to whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports of cold-rolled steel from Korea no later than 45 days after our final determination. If the ITC determines that material injury or threat of material injury does not exist, the proceeding will be terminated and all cash deposits will be refunded. If the ITC determines that such injury does exist, the Department will issue an antidumping duty order directing CBP to assess, upon further instruction by the Department, antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation.

Notification Regarding Administrative Protective Orders (“APOs”)

This notice serves as a reminder to parties subject to APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the terms of an APO is a violation subject to sanction.

This determination and notice are issued and published pursuant to sections 735(d) and 777(i)(1) of the Act.

Appendix I

List of Topics Discussed in the Final Issues and Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Scope of the Investigation

V. Changes Since the Preliminary Determination

VI. Discussion of the Issues

General Comments

1. Differential Pricing

Company-Specific Comments

POSCO

2. International Freight and Domestic Brokerage and Handling Expenses

3. Loading and Foreign Inland Freight Expenses

4. Quality Product Characteristic

5. Yield Loss

6. General and Administrative Expenses

7. Home Market Gross Unit Price Field

8. Inclusion of Warehousing Expense in Freight Revenue Cap Calculations

9. CEP Offset

10. Affiliated Party Purchases Cost Adjustment

Hyundai Steel

11. Whether or not to apply total adverse facts available to Hyundai Steel

12. Control Numbers and Prime/Non-Prime Designation

13. U.S. Sales and Further Manufacturing Costs

14. Repacking Cost for Further Manufactured Merchandise

15. Reporting of Inland Freight, Warehousing Services, International Freight, and Other Services Provided by an Affiliated Company

16. 2013 Financial Statements

17. Certain Home Market Customers

18. CEP Offset

19. Other Issues

20. Other Cost Issues

VII. Recommendation

Appendix II

Scope of the Investigation

The products covered by this investigation are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (“width”) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been “worked after rolling” (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above:

(1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and

(2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies.

Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

• 2.50 percent of manganese, or
• 3.30 percent of silicon, or
• 1.50 percent of copper, or
• 1.50 percent of aluminum, or
• 1.25 percent of chromium, or
• 0.30 percent of cobalt, or
• 0.40 percent of lead, or
• 2.00 percent of nickel, or
• 0.30 percent of tungsten (also called wolfram), or
• 0.80 percent of molybdenum, or
• 0.10 percent of niobium (also called columbium), or
• 0.30 percent of vanadium, or
• 0.30 percent of zirconium

Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium.

For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro-alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels.

Subject merchandise includes cold-rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the cold-rolled steel.

All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation:

• Ball bearing steels;

• Tool steels;

• Silico-manganese steel;

• Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel From Germany, Japan, and Poland.

• Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non-Oriented Electrical Steel From the People's Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.

The products subject to this investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the investigation may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000.

The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the investigation is dispositive.