Certain Cold-Rolled Steel Flat Products From India: Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination and Extension of Provisional Measures

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the “Department”) preliminarily determines that certain cold-rolled steel flat products (“cold-rolled steel”) from India are being, or are likely to be, sold in the United States at less than fair value (“LTFV”), as provided in section 733(b) of the Tariff Act of 1930, as amended (“the Act”). The period of investigation (“POI”) is July 1, 2014, through June 30, 2015. The collapsed entity JSW Steel Limited (“JSWSL”)/JSW Coated Products Limited (“JSCPL”) (collectively “JSW”) is the sole mandatory respondent in this investigation. The estimated weighted-average dumping margins of sales at LTFV are shown in the “Preliminary Determination” section of this notice. Interested parties are invited to comment on this preliminary determination.

DATES:

Effective March 7, 2016.

FOR FURTHER INFORMATION CONTACT:

Patrick O'Connor or Jeffrey Pedersen, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0989 or (202) 482-2769, respectively.

SUPPLEMENTARY INFORMATION:

Background

The Department published the notice of initiation of this investigation on August 24, 2015. For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum that is dated concurrently with this determination and is hereby adopted by this notice. A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (“ACCESS”). ACCESS is available to registered users at https://access.trade.gov,, and to all parties in the Central Records Unit, room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be found at http://enforcement.trade.gov/frn/. The signed Preliminary Decision Memorandum and the electronic version of the Preliminary Decision Memorandum are identical in content.

The Department has exercised its discretion to toll all administrative deadlines due to the recent closure of the Federal Government because of Snowstorm “Jonas”. Thus, all of the deadlines in this segment of the proceeding have been extended by four business days. The revised deadline for the preliminary determination is now February 29, 2016.

Scope of the Investigation

The products covered by this investigation are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. For a full description of the scope of this investigation, see the “Scope of the Investigation,” in Appendix I.

Scope Comments

In accordance with the preamble to the Department's regulations, the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., “scope”). Certain interested parties commented on the scope of the investigation, as it appeared in the Initiation Notice, as well as on additional language proposed by the Department. For a summary of the product coverage comments and rebuttal responses submitted to the record, and an accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. The Department is preliminarily not modifying the scope language as it appeared in the Initiation Notice.

Methodology

The Department is conducting this investigation in accordance with section 731 of the Act. Export prices have been calculated in accordance with section 772(a) of the Act. Normal value (“NV”) has been calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our preliminary determination, see the Preliminary Decision Memorandum.

Single Entity Treatment

For the reasons set forth in the Preliminary Affiliation and Collapsing Memorandum, which we incorporate by reference herein, and in accordance with 19 CFR 351.401(f) and the

Department's practice, we are treating JSWSL and JSCPL as a single entity, JSW, for the purposes of this preliminary determination.

All-Others Rate

Section 735(c)(5)(A) of the Act provides that the estimated all-others rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis dumping margins, and any dumping margins determined entirely under section 776 of the Act. JSW is the only mandatory respondent in this investigation. The Department calculated a company-specific rate for JSW which is not zero, de minimis or based entirely on facts available. Therefore, for purposes of determining the “all-others” rate and pursuant to section 735(c)(5)(A) of the Act, we are using the weighted-average dumping margin calculated for JSW as the estimated weighted-average dumping margin assigned to all other producers and exporters of the merchandise under consideration.

Preliminary Determination

The Department preliminarily determines that the following weighted-average dumping margins exist:

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, we will direct U.S. Customs and Border Protection (“CBP”) to suspend liquidation of all entries of cold-rolled steel from India, as described in the scope of the investigation, that is entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register.

Pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), the Department will instruct CBP to require a cash deposit equal to the weighted-average amount by which the NV exceeds export price, as indicated in the table above, adjusted where appropriate for export subsidies. The cash deposit rate for JSW, when adjusted for export subsidies, is 4.86 percent. The cash deposit rate for all other producers or exporters in India, when adjusted for export subsidies, is 4.86 percent. These suspension of liquidation instructions will remain in effect until further notice.

Disclosure and Public Comment

We intend to disclose the calculations that we performed in this investigation to interested parties in this proceeding within five days after the date of public announcement of the preliminary determination in accordance with 19 CFR 351.224(b). Interested parties are invited to comment on this preliminary determination. Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the final verification report is issued in this proceeding, and rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline for case briefs. Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities. All documents must be filed electronically using ACCESS.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request for a hearing to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce. An electronically-filed request for a hearing must be received successfully in its entirety by ACCESS by 5:00 p.m. Eastern Time, within 30 days after the date of publication of this notice. Hearing requests should contain the party's name, address, and telephone number, the number of participants, and a list of the issues to be discussed. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Verification

As provided in section 782(i) of the Act, we intend to verify the information that will be relied upon in making our final determination.

Postponement of Final Determination and Extension of Provisional Measures

Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by Petitioners. 19 CFR 351.210(e)(2) requires that requests by respondents for postponement of a final antidumping determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

On January 26, 2016, pursuant to 19 CFR 351.210(b) and (e), JSW requested that, contingent upon an affirmative preliminary determination of sales at LTFV, the Department postpone the final determination and that provisional measures be extended to a period not to exceed six months.

In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) Our preliminary determination is affirmative; (2) the requesting exporter accounts for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, we are postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, we will make our final determination no later than 135 days after the date of publication of this preliminary determination, pursuant to section 735(a)(2) of the Act.

International Trade Commission (“ITC”) Notification

In accordance with section 733(f) of the Act, we are notifying the ITC of our affirmative preliminary determination of sales at LTFV. If our final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after our final determination whether these imports are materially injuring, or threaten material injury to, the U.S. industry.

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Appendix I—Scope of the Investigation

The products covered by this investigation are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances. The products covered do not include those that are clad, plated, or coated with metal. The products covered include coils that have a width or other lateral measurement (“width”) of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been “worked after rolling” (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above:

(1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and

(2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross-section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies.

Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

• 2.50 percent of manganese, or
• 3.30 percent of silicon, or
• 1.50 percent of copper, or
• 1.50 percent of aluminum, or
• 1.25 percent of chromium, or
• 0.30 percent of cobalt, or
• 0.40 percent of lead, or
• 2.00 percent of nickel, or
• 0.30 percent of tungsten (also called wolfram), or
• 0.80 percent of molybdenum, or
• 0.10 percent of niobium (also called columbium), or
• 0.30 percent of vanadium, or
• 0.30 percent of zirconium

Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium.

For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels, Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro-alloying levels of elements such as silicon and aluminum. AHSS and UHSS are considered high tensile strength and high elongation steels, although AHSS and UHSS are covered whether or not they are high tensile strength or high elongation steels.

Subject merchandise includes cold-rolled steel that has been further processed in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the cold-rolled steel.

All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation:

• Ball bearing steels;

• Tool steels;

• Silico-manganese steel;

• Grain-oriented electrical steels (GOES) as defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel From Germany, Japan, and Poland.

• Non-Oriented Electrical Steels (NOES), as defined in the antidumping orders issued by the U.S. Department of Commerce in Non-Oriented Electrical Steel From the People's Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan.

The products subject to this investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7209.15.0000, 7209.16.0030, 7209.16.0060, 7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530, 7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6090, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7225.50.6000, 7225.50.8080, 7225.99.0090, 7226.92.5000, 7226.92.7050, and 7226.92.8050. The products subject to the investigation may also enter under the following HTSUS numbers: 7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020, 7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000, 7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and 7229.90.1000.

The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written description of the scope of the investigation is dispositive.

Appendix II—List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Scope of the Investigation

V. All-Others Rate

VI. Affiliation and Collapsing

VII. Discussion of The Methodology Comparisons to Fair Value

A. Determination of the Comparison Method

B. Results of the Differential Pricing Analysis

VIII. Date of Sale

IX. Product Comparisons

X. Export Price and Constructed Export Price

XI. NV

A. Comparison Market Viability

B. Affiliated Party Transactions and Arm's-Length Test

C. Level of Trade

D. COP Analysis

1. Calculation of COP

2. Test of Comparison Market Sales Prices

3. Results of the COP Test

E. Calculation of NV Based on Comparison-Market Prices

XII. Currency Conversion

XIII. Adjustments To Cash Deposit Rates for Export Subsidies in Companion Countervailing Duty Investigation

XIV. Verification

XV. Conclusion