Certain Aluminum Foil From the Sultanate of Oman: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures

Download PDF
Federal RegisterMay 4, 2021
86 Fed. Reg. 23681 (May. 4, 2021)

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) preliminarily determines that certain aluminum foil (aluminum foil) from the Sultanate of Oman (Oman) is being, or is likely to be, sold in the United States at less than fair value (LTFV). The period of investigation is July 1, 2019 through June 30, 2020. Interested parties are invited to comment on this preliminary determination.

DATES:

Applicable May 4, 2021.

FOR FURTHER INFORMATION CONTACT:

Benjamin A. Smith or Alexander Cipolla, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: 202-482-2181 or 202-482-4956.

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). On September 29, 2020, the Aluminum Association Trade Enforcement Working Group and its individual members (collectively, the petitioners) requested the imposition of antidumping and countervailing duties on aluminum foil from five countries. On October 19, 2020, Commerce initiated the antidumping duty investigation on aluminum foil from Oman. On February 17, 2021, Commerce postponed the preliminary determination of this investigation, and the revised deadline is now April 27, 2021. For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum. A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/.

The individual members of the Aluminum Association Trade Enforcement Group include Granges Americas Inc, JW Aluminum Company and Novelis Corporation. The petitioners indicated that Novelis Corporation acquired Aleris Corporation (including all of Aleris' aluminum foil-related operations), effective April 14, 2020.

See Petitioners' submission, “Certain Aluminum Foil from Armenia, Brazil, Oman, Russia, and Turkey—Petition for the Imposition of Antidumping and Countervailing Duties,” dated September 29, 2020.

See Certain Aluminum Foil from the Republic of Armenia, Brazil, the Sultanate of Oman, the Russian Federation, and the Republic of Turkey: Initiation of Less-Than-Fair-Value Investigations, 85 FR 67711 (October 26, 2020) (Initiation Notice).

See Certain Aluminum Foil from the Republic of Armenia, Brazil, the Sultanate of Oman, the Russian Federation, and the Republic of Turkey: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations, 86 FR 9909 (February 17, 2021).

See Memorandum, “Decision Memorandum for the Preliminary Determination in the Less-Than-Fair-Value Investigation of Certain Aluminum Foil from the Sultanate of Oman,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

Scope of the Investigation

The product covered by this investigation is aluminum foil from Oman. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to Commerce's regulations, the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., scope). Interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. For a summary of the scope comments and rebuttal responses submitted to the record for this investigation, and accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. As discussed in the Preliminary Scope Decision Memorandum, Commerce is preliminarily not modifying the scope language as it appeared in the Initiation Notice.

See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997).

See Initiation Notice.

See Memorandum, “Antidumping and Countervailing Duty Investigations of Certain Aluminum Foil from the Republic of Armenia, Brazil, the Sultanate of Oman, the Russian Federation, and the Republic of Turkey: Preliminary Scope Decision Memorandum,” dated concurrently with, and hereby adopted by this notice (Preliminary Scope Decision Memorandum).

The Preliminary Scope Decision Memorandum establishes the deadline to submit scope case briefs. There will be no further opportunity for comments on scope-related issues.

Case briefs, other written comments, and rebuttal briefs submitted by parties in response to this preliminary LTFV determination should not include scope-related issues. See Preliminary Scope Decision Memorandum, and “Public Comment” section of this notice.

Methodology

Commerce is conducting this investigation in accordance with section 731 of the Act. Commerce calculated export prices in accordance with section 772(a) of the Act. Normal value (NV) is calculated in accordance with section 773 of the Act. For a full description of the methodology underlying the preliminary determination, see the Preliminary Decision Memorandum.

All-Others Rate

Sections 733(d)(1)(ii) and 735(c)(5)(A) of the Act provide that in the preliminary determination Commerce shall determine an estimated all-others rate for all exporters and producers not individually examined. Pursuant to section 735(c)(5)(A) of the Act, this rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding rates that are zero, de minimis, or determined entirely under section 776 of the Act.

In this investigation, the “all others” rate is based on the dumping margin calculated for Oman Aluminium Rolling Company LLC (OARC), the only entity selected for individual examination and for which Commerce calculated a margin.

See section 735(c)(5)(A) of the Act.

Preliminary Determination

Commerce preliminarily determines that the following estimated weighted-average dumping margins exist:

See Preliminary Decision Memorandum.

Exporter/producer Estimated weighted- average dumping margin (percent)
Oman Aluminium Rolling Company LLC 4.03
All Others 4.03

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register.

Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), where appropriate, Commerce will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin or the estimated all-others rate, as follows: (1) The cash deposit rate for the respondent listed above will be equal to the company-specific estimated weighted-average dumping margin determined in this preliminary determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin.

To determine the cash deposit rate, Commerce normally adjusts the estimated weighted-average dumping margin by the amount of export subsidies countervailed in a companion countervailing duty (CVD) proceeding, when CVD provisional measures are in effect. Accordingly, where we preliminarily make an affirmative determination for countervailable export subsidies, we offset the estimated weighted-average dumping margin by the appropriate CVD rate. However, in the companion CVD preliminary determination, we did not countervail any export subsidies. Accordingly, we made no adjustment for export subsidy offsets to the estimated weighted-average dumping margin.

See Certain Aluminum Foil from the Sultanate of Oman: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination with Final Antidumping Duty Determination, 86 FR 12913 (March 5, 2021).

These suspension of liquidation instructions will remain in effect until further notice.

Disclosure

Commerce intends to disclose its calculations and analysis to interested parties in this preliminary determination within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination. Normally, Commerce verifies information using standard procedures, including an onsite examination of original accounting, financial, and sales documentation. However, due to current travel restrictions in response to the global COVID-19 pandemic, Commerce is unable to conduct on-site verification of this investigation. Accordingly, we intend to verify the information relied upon in making the final determination through alternative means in lieu of an on-site verification.

Public Comment

Case briefs or other written comments on non-scope issues may be submitted to the Assistant Secretary for Enforcement and Compliance. A timeline for the submission of case briefs and written comments will be provided to interested parties at a later date. Rebuttal briefs, limited to issues raised in case briefs, may be submitted not later than seven days after the deadline date for case briefs. Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this investigation are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities. Commerce has modified certain of its requirements for serving documents containing business proprietary information until further notice.

See 19 CFR 351.309; see also 19 CFR 351.303 (for general filing requirements).

See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July 10, 2020).

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Postponement of Final Determination and Extension of Provisional Measures

Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Section 351.210(e)(2) of Commerce's regulations requires that a request by exporters for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

On April 22, 2021, pursuant to 19 CFR 351.210(e), OARC requested that Commerce postpone the final determination and that provisional measures be extended to a period not to exceed six months. In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) The preliminary determination is affirmative; (2) the requesting exporters account for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination not later than 135 days after the date of publication of this preliminary determination, pursuant to section 735(a)(2) of the Act.

See OARC's Letter, “Certain Aluminum Foil from Oman: Request for Postponement of Final Determination,” dated April 22, 2021.

International Trade Commission Notification

In accordance with section 733(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its preliminary determination. If the final determination is affirmative, then the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether imports of aluminum foil from Oman are materially injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Dated: April 27, 2021.

Ryan Majerus,

Deputy Assistant Secretary for Policy and Negotiations.

Appendix I

Scope of the Investigation

The merchandise covered by this investigation is aluminum foil having a thickness of 0.2 mm or less, in reels exceeding 25 pounds, regardless of width. Aluminum foil is made from an aluminum alloy that contains more than 92 percent aluminum. Aluminum foil may be made to ASTM specification ASTM B479, but can also be made to other specifications. Regardless of specification, however, all aluminum foil meeting the scope description is included in the scope, including aluminum foil to which lubricant has been applied to one or both sides of the foil.

Excluded from the scope of this investigation is aluminum foil that is backed with paper, paperboard, plastics, or similar backing materials on one side or both sides of the aluminum foil, as well as etched capacitor foil and aluminum foil that is cut to shape. Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above. The products under investigation are currently classifiable under Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7607.11.3000, 7607.11.6090, 7607.11.9030, 7607.11.9060, 7607.11.9090, and 7607.19.6000.

Further, merchandise that falls within the scope of this proceeding may also be entered into the United States under HTSUS subheadings 7606.11.3060, 7606.11.6000, 7606.12.3045, 7606.12.3055, 7606.12.3091, 7606.12.3096, 7606.12.6000, 7606.91.3095, 7606.91.6095, 7606.92.3035, and 7606.92.6095. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Scope of Investigation

V. Scope Comments

VI. Affiliation

VII. Discussion of the Methodology

VIII. Currency Conversion

IX. Recommendation

[FR Doc. 2021-09320 Filed 5-3-21; 8:45 am]

BILLING CODE 3510-DS-P