Carbon and Alloy Steel Wire Rod From Spain: Preliminary Affirmative Determination of Sales at Less Than Fair Value and Preliminary Determination of Critical Circumstances, in Part

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the Department) preliminarily determines that carbon and alloy steel wire rod (wire rod) from Spain is being, or is likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is January 1, 2016, through December 31, 2016.

DATES:

Applicable October 31, 2017.

FOR FURTHER INFORMATION CONTACT:

Davina Friedmann or Chelsey Simonovich, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0698 or (202) 482-1979, respectively.

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). The Department published the notice of initiation of this investigation on April 20, 2017. On August 15, 2017, the Department postponed the preliminary determination of this investigation and the revised deadline is now October 24, 2017. For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum. A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov,, and to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/frn/. The signed and the electronic versions of the Preliminary Decision Memorandum are identical in content.

Scope of the Investigation

The products covered by this investigation are wire rod from Spain. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to the Department's regulations, the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., scope). Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. For a summary of the product coverage comments and rebuttal responses submitted to the record for this investigation, and accompanying discussion and analysis of all comments timely received, see the Preliminary Scope Decision Memorandum. Since the issuance of the Preliminary Scope Decision Memorandum, certain parties submitted scope case briefs or scope rebuttal briefs. The Department will issue a final scope decision on the records of the wire rod investigations after considering those comments submitted in scope case and rebuttal briefs.

Affiliation and Collapsing

In accordance with section 771(33)(F) of the Act, 19 CFR 351.401(f), and the Department's practice, we are treating Global Steel Wire (GSW), CELSA Atlantic SA (CELSA Atlantic), Compania Espanola de Laminacion (CELSA Barcelona) (collectively, CELSA) as a single entity for the purposes of this preliminary determination.

Methodology

The Department is conducting this investigation in accordance with section 731 of the Act. The Department has calculated export prices in accordance with section 772(a) of the Act. Normal value (NV) is calculated in accordance with section 773 of the Act. Furthermore, pursuant to section 776(a) and (b) of the Act, the Department has preliminarily relied upon adverse facts available for ArcelorMittal Espana S.A. (AME). For a full description of the methodology underlying the preliminary determination, see the Preliminary Decision Memorandum.

Preliminary Affirmative Determination of Critical Circumstances

In accordance with section 733(e) of the Act and 19 CFR 351.206, the Department preliminarily finds that critical circumstances do not exist for CELSA and all-other companies, but do exist for AME. For a full description of the methodology and results of the Department's critical circumstances analysis, see the Preliminary Decision Memorandum.

All-Others Rate

Sections 733(d)(1)(ii) and 735(c)(5)(A) of the Act provide that in the preliminary determination the Department shall determine an estimated all-others rate for all exporters and producers not individually examined. This rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis margins, and any margins determined entirely under section 776 of the Act. In this investigation, the Department preliminarily assigned a rate based entirely on facts available to AME. Therefore, the only rate that is not zero, de minimis, or based entirely on facts otherwise available is the rate calculated for CELSA. Consequently, the estimated weighted-average dumping margin calculated for CELSA is the margin assigned to all-other producers and exporters, pursuant to section 735(c)(5)(A) of the Act.

Preliminary Determination

The Department preliminarily determines that the following estimated weighted-average dumping margins exist:

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, the Department will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register. Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), the Department will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin or the estimated all-others rate, as follows: (1) The cash deposit rate for the respondents listed above will be equal to the company-specific estimated weighted-average dumping margins determined in this preliminary determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin.

Disclosure

The Department intends to disclose its calculations and analysis performed to interested parties in this preliminary determination within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, the Department intends to verify the information relied upon in making its final determination.

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs. Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this investigation are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Final Determination

Section 735(a)(1) of the Act and 19 CFR 351.210(b)(1) provide that the Department will issue the final determination within 75 days after the date of its preliminary determination. Accordingly, the Department will make its final determination no later than 75 days after the signature date of this preliminary determination.

International Trade Commission Notification

In accordance with section 733(f) of the Act, the Department will notify the International Trade Commission (ITC) of its preliminary determination. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether these imports are materially injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Appendix I

Scope of the Investigation

The products covered by this investigation are certain hot-rolled products of carbon steel and alloy steel, in coils, of approximately round cross section, less than 19.00 mm in actual solid cross-sectional diameter. Specifically excluded are steel products possessing the above-noted physical characteristics and meeting the Harmonized Tariff Schedule of the United States (HTSUS) definitions for (a) stainless steel; (b) tool steel; (c) high-nickel steel; (d) ball bearing steel; or (e) concrete reinforcing bars and rods. Also excluded are free cutting steel (also known as free machining steel) products (i.e., products that contain by weight one or more of the following elements: 0.1 percent or more of lead, 0.05 percent or more of bismuth, 0.08 percent or more of sulfur, more than 0.04 percent of phosphorous, more than 0.05 percent of selenium, or more than 0.01 percent of tellurium). All products meeting the physical description of subject merchandise that are not specifically excluded are included in this scope.

The products under investigation are currently classifiable under subheadings 7213.91.3011, 7213.91.3015, 7213.91.3020, 7213.91.3093, 7213.91.4500, 7213.91.6000, 7213.99.0030, 7227.20.0030, 7227.20.0080, 7227.90.6010, 7227.90.6020, 7227.90.6030, and 7227.90.6035 of the HTSUS. Products entered under subheadings 7213.99.0090 and 7227.90.6090 of the HTSUS also may be included in this scope if they meet the physical description of subject merchandise above. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this proceeding is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Scope Comments

V. Discussion of the Methodology

A. Determination of the Comparison Methold

B. Results of the Differential Pricing Analysis

VI. Date of Sale

VII. Product Comparisons

VIII. Export Price and Constructed Export Price Discussion of the Methodology

IX. Normal Value

A. Home Market Viability

B. Level of Trade

C. Cost of Production (COP) Analysis

1. Calculation of COP

2. Test of Comparison Market Sales Prices

3. Results of the COP Test

D. Calculation of NV Based on Comparison Market Prices

X. Application of Facts Available and Use of Adverse Facts Available

A. Application of Facts Available

B. Use of Adverse Inference

C. Selection and Corroboration of the AFA Rate

XI. Preliminary Determination of Critical Circumstances

A. Legal Framework

B. Critical Circumstances Allegation

C. Analysis

XII. Currency Conversion

XIII. Conclusion