Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Control of Volatile Organic Compound Emissions From AIM Coatings

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Proposed rule.

SUMMARY:

EPA is proposing to approve a State Implementation Plan (SIP) revision submitted by the Commonwealth of Pennsylvania. This revision pertains to the control of volatile organic compound (VOC) emissions from architectural and industrial maintenance (AIM) coatings.

DATES:

Written comments must be received on or before April 12, 2004.

ADDRESSES:

Comments may be submitted either by mail or electronically. Written comments should be mailed to Makeba Morris, Chief, Air Quality Planning Branch, Mailcode 3AP21, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103. Electronic comments should be sent either to morris.makeba@epa.gov or to http://www.regulations.gov,, which is an alternative method for submitting electronic comments to EPA. To submit comments, please follow the detailed instructions described in Part III of the SUPPLEMENTARY INFORMATION section. Copies of the documents relevant to this action are available for public inspection during normal business hours at the Air Protection Division, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103; and the Pennsylvania Department of Environmental Protection, Bureau of Air Quality, P.O. Box 8468, 400 Market Street, Harrisburg, Pennsylvania 17105.

FOR FURTHER INFORMATION CONTACT:

Rose Quinto, (215) 814-2182, or by e-mail at quinto.rose@epa.gov.

SUPPLEMENTARY INFORMATION:

On December 3, 2003, the Pennsylvania Department of Environmental Protection (PADEP) submitted a formal revision to its SIP. The SIP revision consists of the standards and requirements to control VOC emissions from AIM coatings.

I. Background

In December 1999, EPA identified emission reduction shortfalls in several 1-hour ozone nonattainment areas in the Ozone Transport Region (OTR) and required those areas to address the shortfalls. The Ozone Transport Commission (OTC) developed model rules of control measures for a number of source categories and estimated the emission reduction benefits from implementing those model rules. The OTC AIM coatings model rule was based on the existing rules developed by the California Air Resources Board, which were analyzed and modified by the OTC workgroup to address VOC reduction needs in the OTR. The standards and requirements contained in Pennsylvania's AIM coatings rule are consistent with the OTC model rule. Versions of this same model rule to control VOC emissions from AIM coatings has been or is currently being adopted in several states in the Northeastern and Mid-Atlantic regions of the United States. As such this regulation does not impose requirements unique to the Commonwealth of Pennsylvania.

II. Summary of SIP Revision

The Pennsylvania AIM coatings rule (Chapter 130, subpart C) applies to any person who supplies, sells, offers for sale, or manufactures, blends or repackages an AIM coating for use within the Commonwealth of Pennsylvania, as well as a person who applies or solicits the application of an AIM coating within the Commonwealth. The rule does not apply to the following: (1) Any AIM coating that is sold or manufactured for use outside the Commonwealth or for shipment to other manufacturers for reformulation or repackaging; (2) any aerosol coating product; or (3) any architectural coating that is sold in a container with a volume of one liter (1.057 quarts) or less. The rule sets specific VOC content limits, in grams per liter, for AIM coating categories with a compliance date of January 1, 2005. Manufacturers would ensure compliance with the limits by reformulating coatings and substituting coatings with compliant coatings that are already in the market. The rule contains VOC content requirements for a wide variety of field-applied coatings, including graphic arts coatings, lacquers, primers and stains. The rule also contains provisions for a variance from the VOC content limits, which can be issued only after public hearing and with conditions for achieving timely compliance. In addition, the rule contains administrative requirements for labeling and reporting. There are a number of test methods that would be used to demonstrate compliance with this rule. Some of these test methods include those promulgated by EPA and South Coast Air Quality Management District of California. The test methods used to test coatings must be the most current approved method at the time testing is performed.

III. Proposed Action

EPA is proposing to approve the Pennsylvania SIP revision for the control of VOC emissions from AIM coatings submitted on December 3, 2003. The Pennsylvania AIM rule is part of the Commonwealth's strategy to achieve and maintain the ozone standard throughout the Commonwealth. EPA is soliciting public comments on the issues discussed in this document. These comments will be considered before taking final action. Interested parties may participate in the Federal rulemaking procedure by submitting either electronic or written comments. To ensure proper receipt by EPA, identify the appropriate rulemaking identification number PA211-4224 in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments.

1. Electronically. If you submit an electronic comment as prescribed below, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. E-mail. Comments may be sent by electronic mail (e-mail) to morris.makeba@epa.gov, attention: PA211-4224. EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly without going through Regulations.gov, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket.

ii. Regulations.gov. Your use of Regulations.gov is an alternative method of submitting electronic comments to EPA. Go directly to http://www.regulations.gov,, then select “Environmental Protection Agency” at the top of the page and use the “go” button. The list of current EPA actions available for comment will be listed. Please follow the online instructions for submitting comments. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in the ADDRESSES section of this document. These electronic submissions will be accepted in WordPerfect, Word or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By Mail. Written comments should be addressed to the EPA Regional office listed in the ADDRESSES section of this document.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing at the EPA Regional Office, as EPA receives them and without change, unless the comment contains copyrighted material, confidential business information (CBI), or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in the official public rulemaking file. The entire printed comment, including the copyrighted material, will be available at the Regional Office for public inspection.

Submittal of CBI Comments

Do not submit information that you consider to be CBI electronically to EPA. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the official public regional rulemaking file. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public file and available for public inspection without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person identified in the FOR FURTHER INFORMATION CONTACT section.

Considerations When Preparing Comments to EPA

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at your estimate.

5. Provide specific examples to illustrate your concerns.

6. Offer alternatives.

7. Make sure to submit your comments by the comment period deadline identified.

8. To ensure proper receipt by EPA, identify the appropriate regional file/rulemaking identification number in the subject line on the first page of your response. It would also be helpful if you provided the name, date, and Federal Register citation related to your comments.

IV. Statutory and Executive Order Reviews

Under Executive Order 12866 (58 FR 51735, October 4, 1993), this proposed action is not a “significant regulatory action” and therefore is not subject to review by the Office of Management and Budget. For this reason, this action is also not subject to Executive Order 13211, “Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use” (66 FR 28355 (May 22, 2001)). This action merely proposes to approve state law as meeting Federal requirements and imposes no additional requirements beyond those imposed by state law. Accordingly, the Administrator certifies that this proposed rule will not have a significant economic impact on a substantial number of small entities under the Regulatory Flexibility Act (5 U.S.C. 601 et seq.). Because this rule proposes to approve pre-existing requirements under state law and does not impose any additional enforceable duty beyond that required by state law, it does not contain any unfunded mandate or significantly or uniquely affect small governments, as described in the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4). This proposed rule also does not have a substantial direct effect on one or more Indian tribes, on the relationship between the Federal Government and Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes, as specified by Executive Order 13175 (65 FR 67249, November 9, 2000), nor will it have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132 (64 FR 43255, August 10, 1999), because it merely proposes to approve a state rule implementing a Federal standard, and does not alter the relationship or the distribution of power and responsibilities established in the Clean Air Act. This proposed rule also is not subject to Executive Order 13045 (62 FR 19885, April 23, 1997), because it is not economically significant.

In reviewing SIP submissions, EPA's role is to approve state choices, provided that they meet the criteria of the Clean Air Act. In this context, in the absence of a prior existing requirement for the State to use voluntary consensus standards (VCS), EPA has no authority to disapprove a SIP submission for failure to use VCS. It would thus be inconsistent with applicable law for EPA, when it reviews a SIP submission, to use VCS in place of a SIP submission that otherwise satisfies the provisions of the Clean Air Act. Thus, the requirements of section 12(d) of the National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) do not apply. As required by section 3 of Executive Order 12988 (61 FR 4729, February 7, 1996), in issuing this proposed rule, EPA has taken the necessary steps to eliminate drafting errors and ambiguity, minimize potential litigation, and provide a clear legal standard for affected conduct. EPA has complied with Executive Order 12630 (53 FR 8859, March 15, 1988) by examining the takings implications of the rule in accordance with the “Attorney General's Supplemental Guidelines for the Evaluation of Risk and Avoidance of Unanticipated Takings” issued under the executive order.

This proposed rule pertaining to Pennsylvania's AIM rule, does not impose an information collection burden under the provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.).

List of Subjects in 40 CFR Part 52

• Environmental protection
• Air pollution control
• Intergovernmental relations
• Ozone
• Reporting and recordkeeping requirements
• Volatile organic compounds

Authority: 42 U.S.C. 7401 et seq.