Antidumping Duty Order: Certain Hot-Rolled Carbon Steel Flat Products From the Netherlands

Download PDF
Federal RegisterNov 29, 2001
66 Fed. Reg. 59565 (Nov. 29, 2001)

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of Antidumping Duty Order.

EFFECTIVE DATE:

November 29, 2001.

FOR FURTHER INFORMATION CONTACT:

Melissa Blackledge at (202) 482-3518 or Robert James at (202) 482-0649, Antidumping and Countervailing Duty Enforcement Group III, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW, Washington, DC 20230.

SUPPLEMENTARY INFORMATION:

Applicable Statute and Regulations

Unless otherwise indicated, all citations to the statute are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Tariff Act of 1930 (the Tariff Act) by the Uruguay Round Agreements Act. In addition, unless otherwise indicated, all citations to the Department of Commerce (the Department's) regulations are to the regulations at 19 CFR part 351 (2000).

Scope of Order

For purposes of this order, the products covered are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this order. Specifically included within the scope of this order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.

Steel products to be included in the scope of this order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

1.80 percent of manganese, or

2.25 percent of silicon, or

1.00 percent of copper, or

0.50 percent of aluminum, or

1.25 percent of chromium, or

0.30 percent of cobalt, or

0.40 percent of lead, or

1.25 percent of nickel, or

0.30 percent of tungsten, or

0.10 percent of molybdenum, or

0.10 percent of niobium, or

0.15 percent of vanadium, or

0.15 percent of zirconium.

All products that meet the physical and chemical description provided above are within the scope of this order unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this order:

  • Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., ASTM specifications A543, A387, A514, A517, A506).
  • Society of Automotive Engineers (SAE)/American Iron and Steel Institute (AISI) grades of series 2300 and higher.
  • Ball bearings steels, as defined in the HTS.
  • Tool steels, as defined in the HTS.
  • Silico-manganese (as defined in the HTS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
  • ASTM specifications A710 and A736.
  • USS Abrasion-resistant steels (USS AR 400, USS AR 500).
  • All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
  • Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTS.

The merchandise subject to this order is classified in the HTS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, and 7211.19.75.90. Certain hot-rolled flat-rolled carbon steel flat products covered by this order, including: Vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTS subheadings are provided for convenience and U.S. Customs purposes, the written description of the merchandise under this order is dispositive.

Antidumping Duty Order

In accordance with section 735(a) of the Act, the Department made its final determination that certain hot-rolled carbon steel flat products (hot-rolled steel) from the Netherlands is being sold at less-than-fair-value (LTFV). See Notice of Final Determination of Sales at Less Than Fair Value; Certain Hot-Rolled Carbon Steel Flat Products from the Netherlands, 66 FR 50408 (October 3, 2001). On October 24, 2001, the Department issued an amended final determination (see Notice of Amended Final Determination of Sales at Less Than Fair Value; Certain Hot-Rolled Carbon Steel Flat Products from the Netherlands, 66 FR 55637, November 2, 2001). On November 13, 2001, the U.S. International Trade Commission (the ITC) notified the Department of its final determination, pursuant to section 735(b)(1)(A)(i) of the Act, that an industry in the United States is materially injured by reason of LTFV imports of subject merchandise from the Netherlands.

In accordance with section 736(a)(1) of the Act, the Department will direct Customs officers to assess, upon further advice by the Department, antidumping duties equal to the amount by which the normal value of the subject merchandise exceeds the export price (or constructed export price) of the merchandise for all relevant entries of hot-rolled steel from the Netherlands. These antidumping duties will be assessed on all unliquidated entries of hot-rolled steel from the Netherlands entered, or withdrawn from warehouse, for consumption on or after May 3, 2001, the date on which the Department published its notice of preliminary determination for this investigation in the Federal Register. See Notice of Preliminary Determination of Sales at Less Than Fair Value; Certain Hot-Rolled Carbon Steel Flat Products from the Netherlands, 66 FR 22146, (May 3, 2001).

On or after the date of publication of this notice in the Federal Register, Customs officers must require, at the same time as importers would normally deposit estimated duties on this merchandise, a cash deposit equal to the estimated weighted-average antidumping duty margins as noted below. The “All Others” rates apply to all exporters in the Netherlands of subject merchandise not specifically listed. The weighted-average dumping margins are as follows:

Manufacturer/Exporter Cash deposit rate (percent)
Corus Staal BV 2.59
All Others 2.59

This notice constitutes the antidumping duty order with respect to hot-rolled steel from the Netherlands. Interested parties may contact the Department's Central Records Unit, room B-099 of the main Commerce building, for copies of an updated list of the antidumping duty orders currently in effect.

This order is published in accordance with section 736(a) of the Tariff Act.

Dated: November 21, 2001.

Faryar Shirzad,

Assistant Secretary for Import Administration.

[FR Doc. 01-29669 Filed 11-28-01; 8:45 am]

BILLING CODE 3510-DS-P