Aluminum Extrusions From the People's Republic of China: Final Results of Antidumping Duty Administrative Review; 2018-2019

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) finds that each of the companies for which an administrative review was requested, and not withdrawn, failed to demonstrate eligibility for a separate rate; therefore each is part of the China-wide entity.

DATES:

Applicable April 8, 2020.

FOR FURTHER INFORMATION CONTACT:

Mark Flessner, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-6312.

SUPPLEMENTARY INFORMATION:

Background

On December 31, 2019, Commerce published the Preliminary Results of the review of the antidumping duty order on aluminum extrusions from the People's Republic of China (China) covering the period May 1, 2018 through April 30, 2019. Although we invited interested parties to comment on the Preliminary Results, we received no comments. Accordingly, for these final results of review, we adopt the determinations expressed in the Preliminary Results and accompanying Preliminary Decision Memorandum. No decision memorandum accompanies this Federal Register notice.

Scope of the Order

The merchandise covered by the Order is aluminum extrusions which are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by The Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, the subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 1 contains not less than 99 percent aluminum by weight. The subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 3 contains manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. The subject merchandise is made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by weight. The subject aluminum extrusions are properly identified by a four-digit alloy series without either a decimal point or leading letter. Illustrative examples from among the approximately 160 registered alloys that may characterize the subject merchandise are as follows: 1350, 3003, and 6060.

Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (drawn aluminum) are also included in the scope.

Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including brightdip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof.

Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods `kit' defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.

Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation. The following aluminum extrusion products are excluded: Aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7 and containing in excess of 2.0 percent zinc by weight.

The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels. The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a “finished goods kit.” A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled “as is” into a finished product. An imported product will not be considered a “finished goods kit” and therefore excluded from the scope of the Order merely by including fasteners such as screws, bolts, etc., in the packaging with an aluminum extrusion product.

The scope also excludes aluminum alloy sheet or plates produced by other than the extrusion process, such as aluminum products produced by a method of casting. Cast aluminum products are properly identified by four digits with a decimal point between the third and fourth digit. A letter may also precede the four digits. The following Aluminum Association designations are representative of aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 712.0. The scope also excludes pure, unwrought aluminum in any form.

The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) Length of 37 millimeters (“mm”) or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.

Also excluded from the scope of this Order are finished heat sinks. Finished heat sinks are fabricated heat sinks made from aluminum extrusions the design and production of which are organized around meeting certain specified thermal performance requirements and which have been fully, albeit not necessarily individually, tested to comply with such requirements.

Imports of the subject merchandise are provided for under the following categories of the Harmonized Tariff Schedule of the United States (HTSUS): 7606.12.3091, 7606.12.3096, 7604.21.0010, 7604.21.0090, 7604.29.1010, 7604.29.1090, 7604.29.3060; 7604.29.3090; 7604.29.5050; 7604.29.5090; 8541.90.00.00, 8708.10.30.50, 8708.99.68.90, 6603.90.8100, 7616.99.51, 8479.89.94, 8481.90.9060, 8481.90.9085, 9031.90.9195, 8424.90.9080, 9405.99.4020, 9031.90.90.95, 7616.10.90.90, 7609.00.00, 7610.10.00, 7610.90.00, 7615.10.30, 7615.10.71, 7615.10.91, 7615.19.10, 7615.19.30, 7615.19.50, 7615.19.70, 7615.19.90, 7615.20.00, 7616.99.10, 7616.99.50, 8479.89.98, 8479.90.94, 8513.90.20, 9403.10.00, 9403.20.00, 7604.21.00.00, 7604.29.10.00, 7604.29.30.10, 7604.29.30.50, 7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 7608.20.00.90, 8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 8302.10.60.90, 8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 8302.41.30.00, 8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 8302.41.60.80, 8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 8302.49.60.35, 8302.49.60.45, 8302.49.60.55, 8302.49.60.85, 8302.50.00.00, 8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 8414.59.60.90, 8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 8418.99.80.60, 8419.90.10.00, 8422.90.06.40, 8473.30.20.00, 8473.30.51.00, 8479.90.85.00, 8486.90.00.00, 8487.90.00.80, 8503.00.95.20, 8508.70.00.00, 8515.90.20.00, 8516.90.50.00, 8516.90.80.50, 8517.70.00.00, 8529.90.73.00, 8529.90.97.60, 8536.90.80.85, 8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 8708.80.65.90, 8803.30.00.60, 9013.90.50.00, 9013.90.90.00, 9401.90.50.81, 9403.90.10.40, 9403.90.10.50, 9403.90.10.85, 9403.90.25.40, 9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 9403.90.40.60, 9403.90.50.05, 9403.90.50.10, 9403.90.50.80, 9403.90.60.05, 9403.90.60.10, 9403.90.60.80, 9403.90.70.05, 9403.90.70.10, 9403.90.70.80, 9403.90.80.10, 9403.90.80.15, 9403.90.80.20, 9403.90.80.41, 9403.90.80.51, 9403.90.80.61, 9506.11.40.80, 9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 9506.70.20.90, 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 9506.99.20.00, 9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 9506.99.60.80, 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 9507.90.60.00, and 9603.90.80.50.

The subject merchandise entered as parts of other aluminum products may be classifiable under the following additional Chapter 76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as well as under other HTSUS chapters. In addition, fin evaporator coils may be classifiable under HTSUS numbers: 8418.99.80.50 and 8418.99.80.60. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this Order is dispositive.

Final Results of Review

We find that each of the companies for which an administrative review was requested, and not withdrawn, failed to demonstrate eligibility for a separate rate; therefore, each is part of the China-wide entity. A list of these companies is in the attached appendix.

Assessment Rates

Pursuant to section 751(a)(2)(A) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.212(b)(1), Commerce will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review. Commerce intends to issue assessment instructions to CBP 15 days after the date of publication of the final results of review in the Federal Register. Consistent with Commerce's assessment practice in non-market economy cases, if Commerce determines that an exporter under review had no shipments of subject merchandise, any suspended entries that entered under the exporter's case number (i.e., at that exporter's rate) will be liquidated at the China-wide rate.

Cash Deposit Requirements

The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of the subject merchandise from China entered, or withdrawn from warehouse, for consumption on or after the publication date, as provided for by section 751(a)(2)(C) of the Act: (1) For previously investigated or reviewed Chinese and non-Chinese exporters not subject to this administrative review that received a separate rate in a prior segment of this proceeding, the cash deposit rate will continue to be the exporter-specific rate published for the most-recently completed segment of this proceeding in which the exporter was reviewed; (2) for all Chinese exporters of subject merchandise which have not been found to be entitled to a separate rate, the cash deposit rate will be that established for the China-wide entity, which is 86.01 percent; and (3) for all non-Chinese exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to the Chinese exporter that supplied that non-Chinese exporter with the subject merchandise. These deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties and/or countervailing duties prior to liquidation of the relevant entries during this period of review. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties and/or countervailing duties occurred and the subsequent assessment of doubled antidumping duties.

Notification Regarding Administrative Protective Order (APO)

This notice also serves as the only reminder to parties subject to APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until May 19, 2020, unless extended.

Notification to Interested Parties

This notice is issued and published in accordance with sections 751(a) and 777(i)(1) of the Act.

Appendix

List of Companies Failing To Demonstrate Eligibility for a Separate Rate

1. Activa Leisure Inc.

2. Allied Maker Limited

3. Birchwoods (Lin'an) Leisure Products Co., Ltd.

4. Changzhou Changzhen Evaporator Co., Ltd.

5. Changzhou Changzheng Evaporator Co., Ltd.

6. Cosco (J.M.) Aluminum Co., Ltd.

7. Cosco (JM) Aluminum Development Co., Ltd.

8. Dynabright International Group (HK) Ltd.

9. Dynamic Technologies China

10. ETLA Technology (Wuxi) Co. Ltd

11. First Union Property Limited

12. Foshan Jinlan Aluminum Co. Ltd.

13. Foshan JinLan Aluminum Co., Ltd.

14. Foshan Shanshui Fenglu Aluminum Co., Ltd.

15. Guangdong Hao Mei Aluminum Co., Ltd.

16. Guangdong Weiye Aluminum Factory Co., Ltd.

17. Guangdong Xingfa Aluminum Co., Ltd.

18. Hanwood Enterprises Limited

19. Hanyung Metal (Suzhou) Co., Ltd.

20. Honsense Development Company

21. Innovative Aluminum (Hong Kong) Limited

22. Jiangsu Changfa Refrigeration Co.

23. Jiangyin Trust International Inc.

24. Jiangyin Xinhong Doors and Windows Co., Ltd.

25. JMA (HK) Company Limited

26. Justhere Co., Ltd.

27. Kanal Precision Aluminum Product Co., Ltd

28. Kromet International

29. Kromet International Inc.

30. Kromet Intl Inc

31. Longkou Donghai Trade Co., Ltd.

32. Metaltek Group Co., Ltd.

33. Ningbo Yili Import and Export Co., Ltd.

34. North China Aluminum Co., Ltd.

35. PanAsia Aluminum (China) Limited

36. Pingguo Aluminum Company Limited

37. Pingguo Asia Aluminum Co., Ltd.

38. Popular Plastics Company Limited

39. Precision Metal Works Ltd.

40. Shangdong Nanshan Aluminum Co., Ltd.

41. Shanghai Tongtai Precise Aluminum Alloy Manufacturing Co. Ltd.

42. Shenzhen Jiuyuan Co., Ltd.

43. Skyline Exhibit Systems (Shanghai) Co. Ltd.

44. Summit Heat Sinks Metal Co, Ltd

45. tenKsolar (Shanghai) Co., Ltd.

46. Tianjin Jinmao Import & Export Corp., Ltd.

47. Tianjin Ruxin Electric Heat Transmission Technology Co., Ltd.

48. Top-Wok Metal Co., Ltd.

49. Union Industry (Asia) Co., Ltd.

50. Zhejiang Anji Xinxiang Aluminum Co., Ltd.

51. Zhejiang Yongkang Listar Aluminum Industry Co., Ltd.

52. Zhongshan Gold Mountain Aluminum Factory Ltd.