Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Download PDF
Federal RegisterNov 7, 2017
82 Fed. Reg. 51550 (Nov. 7, 2017)

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule; request for comments.

SUMMARY:

We are adopting a new airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211-Trent 970-84 and RB211-Trent 972-84 turbofan engines. This AD requires an inspection of the drains mast. This AD was prompted by cracks found in the transition duct area of the drains mast. We are issuing this AD to address the unsafe condition on these products.

DATES:

This AD becomes effective November 22, 2017.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of November 22, 2017.

We must receive comments on this AD by December 22, 2017.

ADDRESSES:

You may send comments by any of the following methods:

  • Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.
  • Mail: U.S. Department of Transportation, 1200 New Jersey Avenue SE., West Building Ground Floor, Room W12-140, Washington, DC 20590-0001.
  • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
  • Fax: 202-493-2251.

For service information identified in this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE24 8BJ; phone: 011-44-1332-242424; fax: 011-44-1332-249936; email: http://www.rolls-royce.com/contact/civil_team.jsp;; Internet: https://customers.rolls-royce.com/public/rollsroycecare. You may view this service information at the FAA, Engine and Propeller Standards Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call 781-238-7125. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-0816.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-0816; or in person at the Docket Operations office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the mandatory continuing airworthiness information (MCAI), regulatory evaluation, any comments received, and other information. The address for the Docket Office (phone: 800-647-5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT:

Eugene Triozzi, Aerospace Engineer, ECO Branch, FAA, 1200 District Avenue, Burlington, MA 01803; phone: 781-238-7148; fax: 781-238-7199; email: Eugene.triozzi@faa.gov.

SUPPLEMENTARY INFORMATION:

Comments Invited

This AD is a final rule that involves requirements affecting flight safety, and we did not precede it by notice and opportunity for public comment. We invite you to send any written relevant data, views, or arguments about this AD. Send your comments to an address listed under the ADDRESSES section. Include “Docket No. FAA-2017-0816; Product Identifier 2017-NE-29-AD” at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this AD. We will consider all comments received by the closing date and may amend this AD because of those comments.

We will post all comments we receive, without change, to http://www.regulations.gov,, including any personal information you provide. We will also post a report summarizing each substantive verbal contact with FAA personnel concerning this AD.

Discussion

The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued EASA AD 2017-0075R1, dated May 5, 2017 (referred to hereinafter as “the MCAI”), to correct an unsafe condition for the specified products. The MCAI states:

RB211 Trent 900 engines have been found in service with cracks in the transition duct area of the drains mast, which is part of the fire wall in Zone 1. Cracks were found on both pre-Mod 72-H499 drains masts, Part Number (P/N) FW29847, and post-Mod 72-H499 drains masts, P/N KH31996. This condition, if not detected and corrected, could, in combination with a fire in the surrounding area, lead to a breach of the fire wall, possibly resulting in an uncontrolled fire and consequent reduced control of the aeroplane. To address this potential unsafe condition, RR published Alert Non-Modification Service Bulletin (NMSB) RB.211-71-AJ576 to provide inspection instructions for engines with drains mast P/N KH31996 and post-Mod 80-H632 vent ejector installed, which have been determined as more susceptible to cracking.

You may obtain further information by examining the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-0816.

Related Service Information Under 1 CFR Part 51

RR has issued Alert Non-Modification Service Bulletin No. RB.211-71-AJ576, Initial Issue, dated March 17, 2017. The Alert NMSB describes procedures for inspection, repair, and replacement of the drains mast. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

FAA's Determination and Requirements of This AD

This product has been approved by the aviation authority of the United Kingdom, and is approved for operation in the United States. Pursuant to our bilateral agreement with the European Community, EASA has notified us of the unsafe condition described in the MCAI. We are issuing this AD because we evaluated all information provided by EASA and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design. This AD requires inspection and if necessary, replacement of the drains mast.

FAA's Determination of the Effective Date

No domestic operators use this product. Therefore, we find that notice and opportunity for prior public comment are unnecessary and that good cause exists for making this amendment effective in less than 30 days.

Costs of Compliance

We estimate that this AD affects no engines installed on airplanes of U.S. registry.

We estimate the following costs to comply with this AD:

Estimated Costs

Action Labor cost Parts cost Cost per product Cost on U.S. operators
Inspection 2 work-hours × $85 per hour = $170 $10,000 $10,170 $0

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

This AD is issued in accordance with authority delegated by the Executive Director, Aircraft Certification Service, as authorized by FAA Order 8000.51C. In accordance with that order, issuance of ADs is normally a function of the Compliance and Airworthiness Division, but during this transition period, the Executive Director has delegated the authority to issue ADs applicable to engines, propellers, and associated appliances to the Manager, Engine and Propeller Standards Branch, Policy and Innovation Division.

Regulatory Findings

We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979),

(3) Will not affect intrastate aviation in Alaska to the extent that it justifies making a regulatory distinction, and

(4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

  • Air transportation
  • Aircraft
  • Aviation safety
  • Incorporation by reference
  • Safety

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13
[Amended]

2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD):

2017-22-13 Rolls-Royce plc: Amendment 39-19093; Docket No. FAA-2017-0816; Product Identifier 2017-NE-29-AD.

(a) Effective Date

This AD is effective November 22, 2017.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Rolls-Royce plc (RR) RB211-Trent 970-84 and RB211-Trent 972-84 turbofan engines with a drains mast, part number (P/N) KH31996, installed.

(d) Subject

Joint Aircraft System Component (JASC) 7170, Powerplant/Engine Drains.

(e) Reason

This AD was prompted by cracks found in the transition duct area of the drains mast. We are issuing this AD to prevent failure of the drains mast, engine fire, and damage to the airplane.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Required Actions

Within 12 months time since new (TSN) or within 12 months after the effective date of this AD, whichever occurs later, visually inspect the external areas of the transition duct area of the drains mast for a crack, as depicted in Figure 1 of RR Alert Non-Modification Service Bulletin (NMSB) RB.211-71-AJ576, Initial Issue, dated March 17, 2017. If there is a crack:

(1) Before further flight, replace the drains mast with a part eligible for installation, or

(2) Before further flight, seal the crack using the Accomplishment Instructions, paragraph 3.B. of RR Alert NMSB RB.211-71-AJ576, Initial Issue, dated March 17, 2017, and within 100 flight cycles, remove and replace the drains mast with a part eligible for installation.

(h) Definition

(1) For the purposes of this AD, a part eligible for installation is a part not listed in this AD, or a part that has passed the inspection required by this AD.

(2) For the purposes of this AD, a flight cycle is a take-off and landing.

(i) Alternative Methods of Compliance (AMOCs)

(1) The Manager, ECO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (j)(1) of this AD. You may email your request to: ANE-AD-AMOC@faa.gov.

(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

(j) Related Information

(1) For more information about this AD, contact Eugene Triozzi, Aerospace Engineer, ECO Branch, FAA, 1200 District Avenue, Burlington, MA 01803; phone: 781-238-7148; fax: 781-238-7199; email: eugene.triozzi@faa.gov.

(2) Refer to MCAI EASA AD 2017-0075R1, dated May 5, 2017, for more information. You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating it in Docket No. FAA-2017-0816.

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise.

(i) Rolls-Royce plc (RR) Alert Non-Modification Service Bulletin RB.211-71-AJ576, Initial Issue, dated March 17, 2017.

(ii) Reserved.

(3) For RR service information identified in this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE24 8BJ; phone: 011-44-1332-242424; fax: 011-44-1332-249936; email: http://www.rolls-royce.com/contact/civil_team.jsp;; Internet: https://customers.rolls-royce.com/public/rollsroycecare.

(4) You may view this service information at FAA, Engine and Propeller Standards Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call 781-238-7125.

(5) You may view this service information at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

Issued in Burlington, Massachusetts, on November 1, 2017.

Karen M. Grant,

Acting Manager, Engine and Propeller Standards Branch, Aircraft Certification Service.

[FR Doc. 2017-24156 Filed 11-6-17; 8:45 am]

BILLING CODE 4910-13-P