Airworthiness Directives; Pacific Aerospace Limited Airplanes

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule.

SUMMARY:

The FAA is adopting a new airworthiness directive (AD) for certain Pacific Aerospace Limited Model 750XL airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as insufficient clearance between the engine mount, the Beta control rod, and the inter-turbine temperature (ITT) sensing probe that could lead to chafing damage. This AD requires inspecting the engine mount, the temperature probe, and the reversing cable for damage, and taking any necessary corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective December 10, 2021.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of December 10, 2021.

ADDRESSES:

For service information identified in this final rule, contact the Civil Aviation Authority of New Zealand, Level 15, Asteron Centre, 55 Featherston Street, Wellington 6011; phone: +64 4 560 9400; fax: +64 4 569 2024; email: info@caa.govt.nz. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (816) 329-4148. It is also available at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

Examining the AD Docket

You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the MCAI, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT:

Mike Kiesov, Aviation Safety Engineer, General Aviation & Rotorcraft Section, International Validation Branch, FAA, 901 Locust, Room 301, Kansas City, MO 64106; phone: (816) 329-4144; fax: (816) 329-4090; email: mike.kiesov@faa.gov.

SUPPLEMENTARY INFORMATION:

Background

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Pacific Aerospace Limited Model 750XL airplanes. The NPRM published in the Federal Register on July 28, 2021 (86 FR 40381). The NPRM was prompted by MCAI originated by the Civil Aviation Authority (CAA), which is the aviation authority for New Zealand. The CAA of New Zealand has issued AD DCA/750XL/35, effective date February 7, 2019 (referred to after this as “the MCAI”), to correct an unsafe condition for certain Pacific Aerospace Limited Model 750XL airplanes. The MCAI states:

DCA/750XL/35 is prompted by a review of the engine installation procedures, which identified that the clearance between the engine mount, the Beta control rod and the inter-turbine temperature (ITT) sensing probe could be insufficient and result in chafing damage. The [CAA] AD is issued to introduce the instructions in Pacific Aerospace Mandatory Service Bulletin (MSB) PACSB/XL/102 issue 2, dated 5 November 2018.

You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

Discussion of Final Airworthiness Directive

Comments

The FAA received no comments on the NPRM or on the determination of the costs.

Conclusion

This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI and service information referenced above. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on these products. This AD is adopted as proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

The FAA reviewed Pacific Aerospace Limited Mandatory Service Bulletin PACSB/XL/102, Issue 2, dated November 5, 2018. The service information contains procedures for removing support clamps if installed by following the prior version of the service bulletin; inspecting the engine mount, the temperature probe, and the reversing cable for signs of chafing or damage; installing anti-chafing blade tape onto the engine mount tube; and obtaining further guidance for corrective actions. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in ADDRESSES .

Costs of Compliance

The FAA estimates that this AD affects 23 airplanes of U.S. registry. The FAA also estimates it will take about 2 work-hours per airplane to comply with the inspection and install anti-chafing blade tape. The average labor rate is $85 per work-hour and required parts would cost about $10 per airplane.

Based on these figures, the FAA estimates the inspection cost of this AD on U.S. operators to be $4,140 or $180 per airplane.

The damage found during the required inspection may vary from airplane to airplane. The FAA has no way of knowing how much damage each airplane may have or the cost to repair the damage for each airplane.

Contacting the CAA of New Zealand, if required, would take about 1 work-hour for an estimated cost of $85 per airplane.

The FAA has included all known costs in this cost estimate. According to the manufacturer, however, some of the costs of this AD may be covered under warranty, thereby reducing the cost impact on affected operators.

Paperwork Reduction Act

A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a current valid OMB Control Number. The OMB Control Number for this information collection is 2120-0056. Public reporting for this collection of information is estimated to take approximately 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. All responses to this collection of information are mandatory. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to: Information Collection Clearance Officer, Federal Aviation Administration, 10101 Hillwood Parkway, Fort Worth, TX 76177-1524.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

2021-21-11 Pacific Aerospace Limited: Amendment 39-21771; Docket No. FAA-2021-0604; Project Identifier 2019-CE-007-AD.

(a) Effective Date

This airworthiness directive (AD) is effective December 10, 2021.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Pacific Aerospace Limited Model 750XL airplanes, serial numbers 101 through 215, 220, 8001, and 8002, certificated in any category.

(d) Subject

Joint Aircraft System Component (JASC) Code 7100, Power Plant System.

(e) Unsafe Condition

This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as insufficient clearance between the engine mount, the Beta control rod, and the inter-turbine temperature (ITT) sensing probe that could lead to chafing damage. The FAA is issuing this AD to prevent damage to the engine mount, temperature probe, and the reversing cable. The unsafe condition, if not addressed, could result in chafing damage to the ITT system and binding of the Beta control rod.

(f) Actions and Compliance

(1) Unless already done, within 165 hours time-in-service after the effective date of this AD, inspect the engine mount, the temperature probe, and the reversing cable for damage, and, before further flight, take all necessary corrective actions and install anti-chafing blade tape onto the engine mount tube by following the Accomplishment Instructions in Pacific Aerospace Limited Mandatory Service Bulletin PACSB/XL/102, Issue 2, dated November 5, 2018.

(2) Where the service information states to contact Pacific Aerospace Limited if chafing or any damage is present on an engine mount, temperature probe, or reversing cable, this AD requires instead that you contact the Civil Aviation Authority (CAA) of New Zealand at the contact information in paragraph (i)(3) of this AD.

(g) Alternative Methods of Compliance (AMOCs)

(1) The Manager, International Validation Branch, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (h)(1) of this AD or by email at: 9-AVS-AIR-730-AMOC@faa.gov.

(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

(h) Related Information

(1) For more information about this AD, contact Mike Kiesov, Aviation Safety Engineer, General Aviation & Rotorcraft Section, International Validation Branch, FAA, 901 Locust, Room 301, Kansas City, MO 64106; phone: (816) 329-4144; fax: (816) 329-4090; email: mike.kiesov@faa.gov.

(2) Refer to CAA of New Zealand AD No. DCA/750XL/35, effective date February 7, 2019, for more information. You may examine the CAA AD in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-0604.

(i) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise.

(i) Pacific Aerospace Limited Mandatory Service Bulletin PACSB/XL/102, Issue 2, dated November 5, 2018.

(ii) [Reserved]

(3) For service information identified in this AD, contact the Civil Aviation Authority of New Zealand, Level 15, Asteron Centre, 55 Featherston Street, Wellington 6011; phone: +64 4 560 9400; fax: +64 4 569 2024; email: info@caa.govt.nz.

(4) You may view this service information at FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, MO 64106. For information on the availability of this material at the FAA, call (816) 329-4148.

(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email: fr.inspection@nara.gov, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.